Excellent pam polymer for water treatment

pam polymer:
1)high effective;
2)White granule powder;
3)Flocculating and thickening agent.

pam polymer

High Quality pam polymer



pam polymer product introduction:

Polyacrylamide (PAM)
is water-soluble polymer, not insoluble in most organic solvents, has the
feasure of good flocculation , can reduce the friction between liquid, they can be divided into four
types by ion characteristic they are nonionic, anion and cation and bisexual type .

Mainly use of pam polymer:


1,In papermaking process ,used for retention aid agent, intensifier.
2,Used for coagulant, flocculation agent, sludge dehydrating agents in water treatment.
3 Used for drop agent and driving agent in oil exploration
4,
PAM
is also widely used for thickening, stable friction reduction, colloid, binding, film, biomedical
materials etc.


The use method and the note of pam polymer
1,Through the bench, determine the optimal model, and the product the best dosage.

2,Products made into 0.1% (refers to the content of solid concentration of aqueous solution to)
salt-free neutral water advisable.

3,Dissolved water, will this product even scatter into the mix of water, proper heating (< 60 °C) can
accelerate into solution.

4,With solid product packaging, pp woven with inner plastic bags, each bag is 25 kg, gelatinous body
with packed in plastic drum, with inner plastic bags, or 50kg per barrel 200kg.

5,This product has hygroscopic, should be sealed stored in a cool and dry place, temperature must
below 35 °C.

6,Solid products avoid and on the ground, in case the product after hygroscopic make the earth become
slippery.

7,
PAM
aqueous solution, preparation, should be in enamel, galvanized, aluminum or plastic within, not
in iron container configuration and storage.

8,Dissolved,attention shall be paid to the product evenly slowly add take mixing and heating measure
dissolution of the manager, should avoid "solid solution in appropriate temperature under the
preparation, and should avoid long time to go through play of shear machine. The proposal blender
60-200 turn/min, otherwise, it will lead to polymer degradation, the influence is used effect.

9,
PAM
aqueous should be accomplished currently in use now match, when dissolved liquid long placed,
its performance will see a situation of water quality and gradually reduced.

10,In the house of macroporous add flocculant aqueous solution, if long time after heated for mixing of
words, will damage has been formed the flocculants' properties.

specifications of pam polymer:
model
Molecular weight (10,000)
Solid content (%)
Insoluble matter in (%)
Degree of ionization
Residual monomer (%)
1
1900-2000
≥90
≤0.2
20-30
≤0.05
2
1700-1800
≥90
≤0.2
20-30
≤0.05
3
1500-1600
≥90
≤0.2
20-30
≤0.05
4
1300-1400
≥90
≤0.2
20-30
≤0.05
5
≤1200
≥90
≤0.2
20-30
≤0.05