Dyeing decolourize

Dyeing decolourize
1. Appearance: Colorless liquid
2. Solid Content:50%
3. Viscosity:50-500mPa.s
4. PH:3.0-5.0
Dyeing decolourize
Our Water Decoloring Agent is used for color removal of dyeing wastewater or effluent with color problem.
Features:
1) Quaternary cationic polymer
2) Application:
A) Decoloring, flocculating, COD decreasing
B) Mainly used for color removal for dense color waste water from
Dyestuffs plants, suitable to treat waste water with activated, acidic
And disperse dyestuffs
C) Can also be used to treat waste water from textile industry and dye
Houses, pigment industry, printing ink industry and paper industry
3) Appearance: Light-color, sticky liquid
4) Viscosity: 50 - 250mPa. S (20º C)
5) Solid content: >50%
6) PH 30% solution: 3 - 5
7) Specific gravity: 1.2 - 1.3 (25º C)
8) Harmless, no-flammable and non-explosive
9) Usage:
A) Dilutes with 10 - 40 times water and then dosed into the waste water
Directly, after being mixed for several minutes, waste is precipitated or
Air-floated and the water become clear
B) Ph index of the waste water should be adjusted to 7 - 10 for better
Result
C) If colority and COD are relatively high, it can be used with the help of
Polyaluminum chloride to reduce treatment cost, whether polyaluminum
Chloride is used before or afterwards depends on the flocculation test
And the treatment process
10) Storage: Can be stored at room temperature, can not be placed in the
Sun, within a temperature range of 10 - 30º C