Dyes effulent decoloring agent

1 Dyes effulent decoloring agent
2 For waste water
3 Color removal
4 Organic coagulant
5 Organic removal
Dyes effulent decoloring agent

1.The product is mainly used to decolor the effluent with high chromaticity from the dyestuff plant. It is adequate for activated, acidic and dispersing dyes.
2.The product is also used in the treatment of effluent from textile, printing &dyeing industry and printing ink.
3.The rate of decoloring is more than 95% in wastewater treatment, and the rate of COD removal is between 40% and 70%.

SPECIFICATIONS
1. Appearance: light-color, sticky liquid
2. Viscosity: 50-250 m Pa.s (20°C)
3. Solid content: >50%
4. pH, 30% solution: 3-5 5. Specific gravity : 1.2-1.3 (25°C)
APPLICATION METHODS
1. The product shall be diluted with 10-40 times water and then dosed into the waste water directly. After being mixed for several minutes, it can be precipitated or air-floated to become clear water.
2. The pH value of the waste water should be adjusted to 7-10 for better result.
3. When the colority and COD are relatively high, it can be used with the help of polyaluminum chloride, but not mixed together. In this way, the treatment cost can be lowered. Whether polyaluminum chloride is used beforewards or afterwards depends on the flocculation test and the treatment process.
PACKAGE AND STORAGE

1. It is harmless, no-flammable and non-explosive, it can be stored at room temperature, it can not be placed in the sun.
2. It is packaged in plastic drums with each containing 1.25kgs
3. Storage temperature: 10-30 °C.