Thursday, September 29, 2011

#422 Maleic Rosin (High softerning point)

Maleic modified resin (422#) has low acid number
Esterfied maleic rosin
Colour (Fe-Co)
6 max
Softening Point(Ball&Ring)
125 min
Acid Value
35mgKOH/g max
Solubility1:1
Benzol
Clear
Linseed Oil
Compatible
Properties: This product is an esterified maleic rosin with glycerol. Pale yellow colour, transparent solid appearance. It is easy compatible with various solvents and oils, such as coal tar oil, esters, petroleum solvents, vegetable oils and turpentine. Also it is of heat resistance. Therefore, it is very suitable resin to apply for hot-melt adhesives, rosin marker paints, lacquer and inks.
Application: Lacquer, Paints, Inks, Tackifiers for adhesives.
Store & shipment: Store in cool place, avoid high temperature, taken away from fire and prohibit storing with oxidant agent.

(Flame-retardant Grade)/EPS

1.name:EPS Common Grade
2.CAS:14235-54-2
3.MF: C5H14N2O3S
EPS Specification : 1
classification
Specification
Particle-Diameter Range
Expandable Range
Eharacteristics & Application
Flame-retardant Grade
F301
1.0-1.6
50-70
Good flame-retardant,good frothing good preserving,good binding and low heat-conducting rate.
Oxygen index over 30(testing after 7-14 days flowing EPS being shaped) usd as building-materials,materials for heat preservation,thermal insulation and for packing precision instruments
F302
0.8-1.2
45-65
F303
0.7-1.0
40-60
F401
0.5-0.8
30-50
EPS Specification : 2
GRADE
BEAD SIZE(mm)
PRE-EXPANSIONRATE
APPLICATION
ZKF 201
1.40-2.00
50-70
Insulation board
ZKF 301
1.00-1.60
45-65
Large parts packaging and insulation board
ZKF 302
0.85-1.25
40-65
Medium parts packaging and insulation board
ZKF 303
0.70-1.00
40-60
Medium parts packaging and insulation board
ZKF 401
0.50-0.80
30-50
Heavy board and product for special use
ZKF 501
0.40-0.60
25-40
Heavy board and product for special use
EPS Specification : 1
classification
Specification
Particle-Diameter Range
Expandable Range
Eharacteristics & Application
Flame-retardant Grade
F301
1.0-1.6
50-70
Good flame-retardant,good frothing good preserving,good binding and low heat-conducting rate.
Oxygen index over 30(testing after 7-14 days flowing EPS being shaped) usd as building-materials,materials for heat preservation,thermal insulation and for packing precision instruments
F302
0.8-1.2
45-65
F303
0.7-1.0
40-60
F401
0.5-0.8
30-50
EPS Specification : 2
GRADE
BEAD SIZE(mm)
PRE-EXPANSIONRATE
APPLICATION
ZKF 201
1.40-2.00
50-70
Insulation board
ZKF 301
1.00-1.60
45-65
Large parts packaging and insulation board
ZKF 302
0.85-1.25
40-65
Medium parts packaging and insulation board
ZKF 303
0.70-1.00
40-60
Medium parts packaging and insulation board
ZKF 401
0.50-0.80
30-50
Heavy board and product for special use
ZKF 501
0.40-0.60
25-40
Heavy board and product for special use

6,7,8-Trifluoro

chemical product:6,7,8-Trifluoro
Sealing packing and high purity
MF:C12H8F3NO3
Application:Be used in pharmaceutical intermediate.



Name
MF
Specification
Packing


Bourgal
C13H18O
200kg/drum
Sealing packing


Tert-butyl benzene
C10H14
200kg/drum
Sealing packing


2-Ethylaniline
C8H11N
200kg/drum
Sealing packing


2-Chloroaniline
C6H6ClN
200kg/drum
Sealing packing


4-tert-butylbenzyl chloride
C11H15Cl
200kg/drum
Sealing packing


4-(tert-butyl)benzyl mercaptan

200kg/drum
Sealing packing


6,7,8-trifluoro-1
C12H8F3NO3
200kg/drum
Sealing packing

DINP

Diisononyl Phthalate ( DINP) LG GRADE
HIGH QUALITY AND BIGGEST MANUFACTURER
Transparent oily liquid
DINP

Product name:
Diisononyl Phthalate ( DINP)
Product Name: Diisononyl Phthalate
Molecular Formula: C26H42O4
Appearance : transparent oily liquid
Specification:
Item
Index
Total ester %≥
99.0
Color( Pt-Co)# ≤
40
Density (20°C)g/cm3
0.973-0.977
Flash point (open-cup) °C≥
219
Moisture % ≤
0.2
Use: DINP is main general plasticizer, it can work with PVC and do not be precipitated in large dosage, it has better properties, it is better than DOP in volatile, moving capacity and toxicity. It has benn widely used in toy membrane, wire and cable.
Packing: in 200kg iron Drums

DINP

Diisononyl Phthalate ( DINP)
DINP is a kind of wildly used plasticizer.
DINP
Product name:Diisononyl Phthalate ( DINP)
Product Name: Diisononyl Phthalate
Molecular Formula: C26H42O4
Appearance : transparent oily liquid
Specification:
Item
Index
Total ester %≥
99.0
Color( Pt-Co)# ≤
40
Density (20°C)g/cm3
0.973-0.977
Flash point (open-cup) °C≥
219
Moisture % ≤
0.2
Use: DINP is main general plasticizer, it can work with PVC and do not be precipitated in large dosage, it has better properties, it is better than DOP in volatile, moving capacity and toxicity. It has benn widely used in toy membrane, wire and cable.

DISPROPORTIONATED ROSIN

DISPROPORTIONATED ROSIN (C19H29COOH) is obtained by isomerizing gum rosin with a Pd-C catalyst.

DJ-0605 waterborne polyurethane resin for textile coating Plastic

waterborne polyurethane resin for textile coating Plastic, Environmental friendly, used for coating plastic spinning preparation
DJ-0605 waterborne polyurethane resin for textile coating Plastic
1.Component & Production:
Aliphatic polyether waterborne polyurethane dispersion liquid water , soft touch,Excellent adhesion, Good water resistance, After finishing, the goods by the excellent hand-spinning objects, the strong sense of urgent flexibility.. Anti-yellowing Anti-yellowing.

2. Physical Properties:
Solid content %
20±1
Emulsion appearance
Milky white Without mechanical impurities
Adhesion power
0-2 class
Flexibility
≤0.5mm
Wear resistance
≤0.01
Viscosity (paint four cups,22)
14±2

3. Main purpose :
Environmental friendly, used for coating plastic spinning preparation.

4. Performance characteristics
Wet and dry rub-resistant coating with excellent performance,Soft Touch,Good water resistance,Bending resistance and excellent low temperature. urgent flexibility.

5. Packaging:, 50kg, 100kg, 200kg. Plastic packing barrels.

DL-lactide

DL-lactide
White needle-shaped crystals
CAS:95-96-5 MF: C6H8O4
MW: 144.13 EINECS: 202-468-3
purity:99.5%
DL-lactide
1.White needle-shaped crystals
CAS:95-96-5 MF: C6H8O4
MW: 144.13 EINECS: 202-468-3
purity:99.5%
2.Application:
Intermediate product to compose polylactide
3.
Configuration
White needle-shaped crystals
Purity
≥99.5(%)
Melting Range
122-126 °C
Moisture content
≤200ppm
Heavy Metal
≤0.5(ppm
4.
Packaging Detail:
vacuum packing
Delivery Detail
15 days after T/T
Update Date:2011/6/22 5:17:31

DOP (Dioctyl Phthalate) 99.5%

DOP(Dioctyl Phthalate) 99.5%
1.CAS:117-84-0
2.type: Transparent liquid
3.uasage:in PVC, PE
DOP(Dioctyl Phthalate) 99.5%
Uses and characteristics :It is one of most popular plasticizer, it has excellent performance, such as good blending capacity, high efficiency, low volatility, anti cold and hot, low offset , waterproof and anti-UV, good electrical capacity. It can be used in PVC, PE and cellulosr, such as film, cable, artificial leather, pipe, sheet material, mold plastic , or used as softener of rubber
SPECIFICATION
Color(APHA)............................................ 30max
Ester %................................................... 99.5min
Acidity (?benzene dicarbonic acid)g/cm3..... 0.010
Loss on dry (125oC3hr)%........................... 0.2max
Flash point(open)oC ..................................195min
Sg D30MD............................................... 0.982-0.988
volume resistivity 0.0m.............................. 0.20min
If you have any question on the details, please contact us. We will give you the best answers at any time!

DOP (Dioctyl Phthalate) 99.5%

DOP(Dioctyl Phthalate) 99.5%
1.CAS:117-84-0
2.type: Transparent liquid
3.uasage:in PVC, PE and cellulosr
DOP(Dioctyl Phthalate) 99.5%
Uses and characteristics :It is one of most popular plasticizer, it has excellent performance, such as good blending capacity, high efficiency, low volatility, anti cold and hot, low offset , waterproof and anti-UV, good electrical capacity. It can be used in PVC, PE and cellulosr, such as film, cable, artificial leather, pipe, sheet material, mold plastic , or used as softener of rubber
SPECIFICATION
Color(APHA)............................................ 30max
Ester %................................................... 99.5min
Acidity (?benzene dicarbonic acid)g/cm3..... 0.010
Loss on dry (125oC3hr)%........................... 0.2max
Flash point(open)oC ..................................195min
Sg D30MD............................................... 0.982-0.988
volume resistivity 0.0m.............................. 0.20min
If you have any question on the details, please contact us. We will give you the best answers at any time!

DOP (dioctyl phthalate 99.5%)

Colorless liquid oily shape
Quality indicator: GB11406-89
Outside view transparent, found no impurity oily shape liquid
1.Dioctyl Phthalate DOP 99.5%
2.Essential Plasticiser
3.Good blending capacity
4.Good price and high quality
Product Name:
Dioctyl phthalate DOP
Molecular Formula
: C24H38O4
Molecular weight:
390.30
Properties:
colorless oily liquid, specific weight 0.9861 (20/20), -55 melting point, boiling point 370 (pressure), does not dissolve in water, soluble in ethanol, ether, mineral oil, most of the organic solvents
Specifications:
Index name
Value
Premium grade
First grade
Salable product
Appearance
transparent oily liquid
Color(APHA)≤
30
40
120
Ester %
99.5
99.0
99.0
Acidity (?benzene dicarbonic acid)g/cm
3
0.010
0.015
0.030
Loss on dry (125
o
C3hr)%≤
0.2
0.3
0.5
Flash point(open)
o
C ≥
195
192
190
Sg D
30
MD
0.982-0.988
0.982-0.988
0.982-0.988
volume resistivity 0.0m≥
0.20
0.20
0.30






Packing:
galvanized metal pail ,Net Wt 200kg
Uses and characteristics :
It is one of most popular plasticizer, it has excellent performance, such as good blending capacity, high efficiency, low volatility, anti cold and hot, low offset , waterproof and anti-UV, good electrical capacity. It can be used in PVC, PE and cellulosr, such as film, cable, artificial leather, pipe, sheet material, mold plastic , or used as softener of rubber

DOP 99.0%

DOP 99.5%
1: used in PVC,PE and cellulosr,such as film,cable,
2:artificial leather,pipe,sheet material.mold plastic
Dioctyl Phthalate (DOP) 99.5%
Molecular Formula: C
24
H
38
O
4
CAS: 35948-25-5
Packing: 200KG/DRUM
Application: DOP is an important and general primary plasticizer, chiefly used in the process of PVC resin. DOP is widely used in the industry of plastic, rubber, oil paint and emulsifying agent. PVC plasticized by it can be used in the manufacture of artificial leather, pipe, sheet material, mold plastic, packaging material and cables, etc.
Specification:
Item
Standard
Ester Content, % min
99.5
Acidity, mgKOH/g max
0.01
Loss on dry (125 °C3hr), %max
0.2
Color (APHA), max
30
Flash point (open), min
195
Sg D
30
MD
0.982—0.988
Volume resistivity, min
0.2

DOP 99.5%

DOP is used in PVC,PE and cellulosr,such as film,cable,artificial leather,pipe,sheet material.mold plastic
DOP (premium grade)

Specification:
Purity----------------------------------------------99.5min
Acidity,mgKOH/g--------------------------------0.010
Loss on dry 1253hr----------------------------0.2%max
Chroma(platinum-cobalt)-------------------------30max
Flash point(open)----------------------------------195min
Volume resistiviry0.0m≥-------------------------------------0.20min

Packing:200kg/iron drum
Payment:L/C at sight or T/T

Apllication:it is one of most popular plasticizer,it has excellent performance,such as good blending capacity,high efficiency,low volatility,anticold and hot,low offset,waterproof and anti-UV,good electrical capacity,it can be used in PVC,PE and cellulosr,such as film,cable,artificial leather,pipe,sheet material.mold plastic,or used as softener of rubber.

Wednesday, September 28, 2011

750 High Active Polyisobutylene

polymers
Colorless, odorless, non-toxic
Good compatibility with most hydrocarbon polymers and organic
polymers 750 High Active Polyisobutylene
Property

Origin: South Korea
Colorless, odorless, non-toxic
Good compatibility with most hydrocarbon polymers and organic
Polymerization of isobutylene by the pure, homogeneous structure
There is no residue after volatilization or thermal decomposition temperature
High reactivity

DOP 99.5%

DOP 99.5%
1. Prompt delivery
2. Free sample
3. Competitive price& quality
4. good after-sale service
DOP 99.5%
Product Name:
Dioctyl phthalate DOP
Molecular Formula
: C24H38O4
Molecular weight:
390.30

(
1)Specification of DOP dioctyl phthalate:

Index name
Value
Premium grade
First grade
Salable product
Appearance
transparent oily liquid
Color(APHA)≤
30
40
120
Ester %
99.5
99.0
99.0
Acidity (?benzene dicarbonic acid)g/cm
3
0.010
0.015
0.030
Loss on dry (125
o
C3hr)%≤
0.2
0.3
0.5
Flash point(open)
o
C ≥
195
192
190
Sg D
30
MD
0.982-0.988
0.982-0.988
0.982-0.988
volume resistivity 0.0m≥
0.20
0.20
0.30

(
2) Packing DOP dioctylphthalate:
galvanized metal pail ,Net Wt 200kg

(3) Uses:
PVC granule, non-filling rolling film, artificial leather, cable, board material, flaky material, pipe material, rubber bar, foam material, film, paint, rubber, organic glass, ink, plastisol and vinyl-acetate adhesive.

DOP 99.5%

DOP Plasticizer
Free sample.
Manufacturer offer with SGS inspection for Quality and Quantity
ISO9001:2000 certified
Product name: Dioctyl Phthalate (DOP)
Molecular Formula :
C
24
-H
38
-O
4
CAS :
117-81-7
Appearance:
Transparent oily liquid
Specifications:
Index name
Value
Premium grade
First grade
Salable product
Color(APHA) ≤
30
40
120
Ester %
99.5
99.0
99.0
Acidity(Benzene dicarbonic acid) g/cm
3
0.010
0.015
0.030
Loss on dry(125°C3hr)% ≤
0.2
0.3
0.5
Flash point(open) °C ≥
195
192
190
Sg D
30

MD
0.982-0.988
0.982-0.988
0.982-0.988
Volume resistivity 0.0m ≥
0.20
0.20
0.30
Use:
It is an important and primary plasticizer, mainly used in the processing of PVC resins, chemical fiber resins, ABS resins and rubber. And plasticized PVC can be used in the manufacture of leatheroid,agricultural film,packing materials and cables.

Packing:
In 200KG/galvanized metal pail.

DOP Premium Grade

DOP Premium Grade
Plasticizer
1, Free Sample
2, Manufacturer offer with SGS PSI for Quality and Quantity
3, ISO9001:2000
Product name: DOP Premium Grade
Molecular Formula :
C
24
-H
38
-O
4
CAS :
117-81-7
Appearance:
Transparent oily liquid
Specifications:
Index name
Value
Premium grade
First grade
Salable product
Color(APHA) ≤
30
40
120
Ester %
99.5
99.0
99.0
Acidity(Benzene dicarbonic acid) g/cm
3
0.010
0.015
0.030
Loss on dry(125°C3hr)% ≤
0.2
0.3
0.5
Flash point(open) °C ≥
195
192
190
Sg D
30

MD
0.982-0.988
0.982-0.988
0.982-0.988
Volume resistivity 0.0m ≥
0.20
0.20
0.30
Use:
It is an important and primary plasticizer, mainly used in the processing of PVC resins, chemical fiber resins, ABS resins and rubber. And plasticized PVC can be used in the manufacture of leatheroid,agricultural film,packing materials and cables.

Packing:
In 200KG/galvanized metal pail.

Dark Color Hydrocarbon Resin C9

1. High Viscosity.
2. Excellect tackifier in the rubber industry
3. Even Granular form
4. Dark Color C9 resin
Dark Color Hydrocarbon Resin C9
Aromatic Petroleum Resin
Hydrocarbon resin C9(17-18#)

Brief Introduction:
This product is made by C9 fraction, by-product of ethylene, through thermo-polymerization. It's a transparent flake and granular solid with the color of light yellow to light brown. It has the properties of good solubility, mutual solubility, water resistance, insulation and very good chemical stability over acid and alkali, and good adhesive strength and lower heat conduction, etc. as well.

Applications:
This product is suitable for coating, paint, printing ink, adhesive, rubber assistant agent and modified resin, etc.

Quality Standard:
Q/SQL001-2004

Specifications:
Item
Quality Index
Code of softening point
C9-100(DARKER COLOR)
Range of soften point
o
C (ball method)
90-100
Color series no(sample:methylbenzene=1:1)
17-18
#
Acid mgKOH/g ≤
0.98
Ash % ≤
0.1
N-heptylalkane saturation (25
o
C) mL
-
Iodine gI
2
/100g <
130
Viscosity m.Pa.s
-

Packing:
25kg/Paper bag, the packing can be changed by client's requirements

Storage and transportation:
It can be transported by truck, train and ship etc. but must avoid sun-scrched and rain-drenched and damp, hook, alkali and oxidant.

Shelf life:
One year in ventilating, cool and dry area.

De-molding Agent

Excellent de-moulding effect with smooth and bright surface of goods, clear texture of mold

Product Name
De-molding Agent RH-26 ( for Aluminum and Magnesium Casting)
Composition
Modified Siloxane
Basic Character
Appearance: milky emulsion
Solid Content: 30%
Toxicity: No harm to the health in the normal condition
Characteristics
Excellent de-moulding effect with smooth and bright surface of goods, clear texture of mold
Excellent coating. Later painting and coating directly without washing agent.
Environmental protection, avoid damage to health of employees by oily de-moulding agent.
Usage
Stir the De-moulding agent to the even, and then take 1 Kg from the drum, add 100-120Kg soften water, after mixing evenly, use high-pressure spray to spurt and coat on the mould evenly, then do casting or die casting.
Package
20Kg or 50Kg Plastic Barrel
Storage
Place in cool and ventilated place. Half a year of storage period ( Sealed condition)

Decoloring Agent(quaternary ammonium cationic polymer)

The rate of decoloring is more than 95% in wastewater treatment, and the rate of COD removal is between 40% and 70%.
DC-50
(CAS No. 55295-98-2)
This product is a quaternary ammonium cationic polymer. It has excellent efficiency in decoloring, flocculating and COD removal.
Properties
1.The product is mainly used to decolor the effluent with high chromaticity from the dyestuff plant. It is adequate for activated, acidic and dispersing dyes.
2.The product is also used in the treatment of effluent from textile, printing &dyeing industry and printing ink.
3.The rate of decoloring is more than 95% in wastewater treatment, and the rate of COD removal is between 40% and 70%.
Specifications
Item
DC-50
Appearance
colorless or light-color sticky liquid
Dynamic viscosity (cps,20°C)
50~500
pH (30% water solution)
3.0~5.0
Solid content % ≥
50

The product can be made upon customers' special request.
Application Method & Notes
1.The product shall be diluted with 10~40 times water, then added to the wastewater directly. After stirring for several minutes, the clear water will be got by precipitation or air-floatation.
2.The optimized pH of the wastewater accepted is 6-10.
3.It is recommended to use this product with the inorganic flocculants to treat the effluent with high color and COD to reduce the operation cost. The order and proportion of agent dosage depend on the flocculation test and the effluent treatment process.
4.The product is nonflammable and unexplosive. The suitable storage temperature is 5~30°C. Insolation is forbidden.
5.The product is packed in plastic drums according to the requirements of clients.
6.The product would show layer separation and become white at low temperature. There is no negative impact on the usage after mixing up.
7. The shelf life is 12 months.
8. The product has some corrosivity. It needs lots of water to wash if the product splashes into eyes.




Decoloring Agent

This product is a quaternary ammonium cationic polymer. It has excellent efficiency in decoloring, flocculating and COD removal
DC-50
(CAS No. 55295-98-2)
This product is a quaternary ammonium cationic polymer. It has excellent efficiency in decoloring, flocculating and COD removal.
Properties
1.The product is mainly used to decolor the effluent with high chromaticity from the dyestuff plant. It is adequate for activated, acidic and dispersing dyes.
2.The product is also used in the treatment of effluent from textile, printing &dyeing industry and printing ink.
3.The rate of decoloring is more than 95% in wastewater treatment, and the rate of COD removal is between 40% and 70%.
Specifications
Item
DC-50
Appearance
colorless or light-color sticky liquid
Dynamic viscosity (cps,20°C)
50~500
pH (30% water solution)
3.0~5.0
Solid content % ≥
50

The product can be made upon customers' special request.
Application Method & Notes
1.The product shall be diluted with 10~40 times water, then added to the wastewater directly. After stirring for several minutes, the clear water will be got by precipitation or air-floatation.
2.The optimized pH of the wastewater accepted is 6-10.
3.It is recommended to use this product with the inorganic flocculants to treat the effluent with high color and COD to reduce the operation cost. The order and proportion of agent dosage depend on the flocculation test and the effluent treatment process.
4.The product is nonflammable and unexplosive. The suitable storage temperature is 5~30°C. Insolation is forbidden.
5.The product is packed in plastic drums according to the requirements of clients.
6.The product would show layer separation and become white at low temperature. There is no negative impact on the usage after mixing up.
7. The shelf life is 12 months.
8. The product has some corrosivity. It needs lots of water to wash if the product splashes into eyes.


Decolorizing Agent

1.decolor the effluent with high chromaticity from the dyestuff plant
2.Quaternary ammonium cationic polymer
3.50% content
This product is a quatemary ammonnium cationnic polymer.It has excellent efficiency in decoloring, flocculating and COD removal.

Application fields and properties:
1. The product is mainly used to decolor the effluent with high chromaticity from the dyestuff plant. It is quite suitable to treat activated dyes, acidic dyes and dispersing dyes.
2. The product is also used in the treatment of effluent from textile, printing ,dyeing industry and printing ink.
3. The rate of decoloring is more than 95% in wastewater treatment, and the rate of COD removal is between 40% and 70%.

Specifications
Item
A
B
C
D
Appearance
Colorless or light-color sticky liquid
Solid content (%) ≥
38
40
45
50
Dynamic viscosity (mp
a
•s,20°C)
20—500
PH (25% water solution)
2.5—5.0
The product can be made upon customer’s special request.

Application Method and Not
es
1. The product shall be diluted with 10-40 times water, and then added to the wastewater directly. After stirring for several minutes, the clear water will be got by precipitation or air-floatation.
2. The acceptable optimized PH of the wastewater is 6-10.
3. It is recommended to use this product together with the inorganic flocculants to treat the effluent with high color and COD to reduce the operation cost. The order and proportion of agent dosage depend on the flocculation test and the effluent treatment process.
4. The product is nonflammable and unexplosive. The suitable storage temperature is 5-30°C. Avoid direct sunlight.
5. The substance is slightly irritable

to eyes and skin, avoid eyes and skin contact.
6. The product storage period is 1 year. Layer separation would appear and the product would become white at low temperature .There is no negative impact on the usage efficiency after mixing up.
7. The product is packed in plastic drums according to the requirements of clients.

94% Sodium Tripolyphosphate tech grade

94% Sodium Tripolyphosphate tech grade
(1)good quality
(2)competetive price
(3)timely delivery
(4)excellent service.
94% Sodium Tripolyphosphate tech grade

Specification:
Na
5
P
3
O
10
,% ,Min.
94
P
2
O
5
,% ,Min.
57
Insolubles, % Max.
0.05
PH Value(1%Solution)
9.5-10.0
Iron (Fe), %, Max.
0.015
Fluoride (F), %, Max.
0.003
Chloride (Cl), %, Max.
0.025
Sulphate (as SO
4
), %, Max.
0.4
Bulk density, g/l
650-990
White degree %,Min.
93
Phase I
10-30

Packing:25kg plastic bags, 25MT per 20'FCL or as per buyers' requirement

Sodium Tripolyphosphate 94% STPP GENERAL INFORMATION

HS CODE
2835310000
CAS NO
7758-29-4
GRADE
national standard china
FORMULA
Na5P3O10
MOLECULAR WEIGHT
367.86

94% Sodium Tripolyphosphate STPP PROPERTIES

Appearance
White powder
Melting Point
622°C
Boiling Point
1000°C

Dehydrating Agent

Ion Exchange Resin, Anion exchange resin, Cation exchange resin, Chelating

Appearance
Strongly Acid Cation Exchange Resin are widely used for hard water softening, preparation of water, hydrometallurgy, rare metals seperation, extraction of antibiotics, drug purification, sugar desalination, waste water treatment. amino acid recycling and so on.

Specification
NO.
ITEM
SPEC
1
Type
Strongly acidic
2
Matrix
Polystyrene
3
Function group
-SO
3
-
4
Ionic form
Na
+
5
Moisture content (%)
45-50
6
Quality Total Exchange Capacity (mmol/g)
≥4.5
7
Total exchange capacity (mmol/ml)
≥1.9
8
Defined Shear Rate (%)
≥92
9
Bulk Density (g/ml)
0.77-0.87
10
True Density (g/ml)
1.25-1.29
11
Particle Size Range (%)
0.315-1.25 mm≥95

Packing
25liter PE bags

Contact
Tel:0086-351-3343082
fax:0086-351-3343281

Delicate hydrogenated rosin

1.used as adhesives,softener
2.used as plasticizer,paiting
3 solder stick
4.flux

Water-White Rosin
Item
WWR-1100
WWR-3100
Fe-Co colour scale / Lovibond colour, max
100
0.7
XC
0.2

100
0.7
XC
0.2

Softening Point(R&B),
78.0~84.0
78.0~84.0
Acid Value,mgKOH/g
170.0~180.0
170.0~180.0
Tetrahydro resin acid, %
10~20
30~40
Abietic acid,% , max
1.0
0.5
Dehydroabietic acid, %, max
20.0
20.0
Test of heat stability (200/2h) , max
XA
XA

2. Properties and uses:
This series of products are made from gum rosin that have been through technical treatment of hydrogenation, being disproportionated and then refined, used in high quality solid or liquid solder flux, and special usage.
3. Test:
Specification of test of heat stability doesn't act as quality assessment of products, but only as a reference to customers.
4. Packing:
(1) Drum: Galvanized iron drum, 225kg net each drum.
(2) Packing specified by customers.

Detergent Sodium Tripolyphosphate (STPP) 94%

1. Name: Sodium Tripolyphosphate(STPP) 94%
2. Applications: Detergent, petroleum, metallurgy, mine, water treatment etc.
Sodium Tripolyphosphate (STPP) 94%

1. Chemical Formula: Na5P3O10
2. Appearance: White powder

3. Applications

Sodium tripolyphosphate (STPP) 94% is used as detergent, used in petroleum, metallurgy, mine, water treatment, the food modifier, the water keeping agent.

4. Specification:

ITEM
SPECIFICATION
Sodium Tripolyphosphate (as Na5P3O10)
94% min
Total Phosphorous (as P2O5)
57% min
Water Insoluble
0.06% max
Iron (as Fe)
90ppm max
Bulk Density
0.65~0.75 g/cm3
Screenings 1mm on test screen
2% max
Content of Phase I
10~30
Whiteness(W10)
85% min
pH (10g/l solution)
9.2-10.0

5. Packing&Storage


25kgs/PPbag, 22MT/20’FCL
Keep in cool, good ventilating warehouse, avoid damp rain or sunshine in transit, keep warm in cold area in winter. Handling with care during loadiing and discharge.

Detergent Sodium Tripolyphosphate (STPP) 96%

1. Name: Sodium Tripolyphosphate(STPP) 96%
2. Applications: Detergent, petroleum, metallurgy, mine, water treatment etc.
Sodium Tripolyphosphate (STPP) 96%

1. Chemical Formula: Na5P3O10
2. Appearance: White powder

3. Applications

Sodium tripolyphosphate (STPP) 96% is used as detergent, used in petroleum, metallurgy, mine, water treatment, the food modifier, the water keeping agent.

4. Specification

ITEM

SPECIFICATION
Na5P3O10
96%min
P2O5
57.0%min
Water insoluble
0.10%max
Iron (Fe)
0.007% max
Whiteness(W10 )
85%min
Particle size (passing through 1.00mm Trv-sieve)
95.0%max
pH (10g/l solution)
9.2-10.0
Heavy metal as Pb
0.001%max

5. Packing&Storage

25kgs/PPbag, 22MT/20’FCL
Keep in cool, good ventilating warehouse, avoid damp rain or sunshine in transit, keep warm in cold area in winter. Handling with care during loadiing and discharge.

Dibasic Lead Phosphite

1.Dibasic Lead Phosphite (DBLP)
2.Good quality and lower price
3.I am a manufacturer
4.Provide technical assistant
Dibasic Lead Phosphite

1.Characters and Uses:
White or light yellow powder. Density is 6.1, the refractive index is 2.25, at 200 or so into the black, 450 or so yellow. No dissolve in water in all organic solvents, soluble in hydrochloric acid, nitric acid. Dibasic lead phosphate with weatherability, thermal stability, excellent electrical properties, such as geo-and anti-oxidation and UV-shielding performance.

2.Specification:

Terms
Specification
Grade
Super
1st
2st
Lead content(As PbO)%
89.0-91.0
89.0-91.0
88.5-91.5
Phosphorous Acid content,% ≤
10.2-12.0
10.0-12.0
9.0-12.0
Moisture,%
0.30
0.40
0.60
Fineness(thr. mesh 200),%
99.7min
99.6min
99.2min


3.Packaging:

In net 25 kg polywoven bags. Keep it in airtight containers and dry, cool and dark place. Damp-proof, far from fire and no contact with corrosive matter.

Dibutyl phthalate99min

Chemical reagent
1 Advanced technology
2 high purity best package
3 widely used product


Product Name; DBP
CAS No.; 84-74-2
H.S. Code; 29171310


Brief Introduction
DBP


Specifications
DBP 99.5% Plasticizer
1.Use; Plastic/rubber industry
2.Transparent oily liquid
3.M.W.;278.35
4.CAS NO.: 84-74-2
Product name:DBP 99.5% Plasticizer
Formula; C16H22O4
Molecular Weight; 278.34
Specification;
Index name
Value
Premium grade
First grade
Salable product
Appearance
transparent oily liquid
Color(APHA)≤
20
25
60
Ester % ≥
99.5
99.0
99.0
Acidity (as benzene dicarbonic acid)% ≤
0.010
0.015
0.030
Loss on dry (125
o
C3hr)%≤
0.3
0.5
0.7
Flash point(open)
o
C ≥
160
160
160
Sg D
30
MD
1.044-1.048
1.044-1.048
1.044-1.048
PropertIes and features;
DBP is a primary plasticizer for cellulose resin and PVC, especially applied for the coating of nitrocellulose. It has fine solubility, dispersion, viscosity, flexibility for film and fine stability. This material can be dissolved easily in pigment, can be used in pigment film, letheroid and plastic products.
Packing In 200KG/galvanized metal pail Loading capacity: 16MT/20'FCL (80 Drums)

Dibutylphthalate

Dibutylphthalate
1.CAS: 84-74-2
2.EINECS: 201-557-4
3.Apperance: Transparent oily liquid
4.Packing::200kg/drum, 16MT/20'FCL
Dibutylphthalate (DBP)
CAS: 84-74-2
EINECS: 201-557-4
HS Code: 2917 3410
MF: C16H22O4
Apperance: Transparent oily liquid
Packing:
200kg/drum, 16MT/20’FCL
Specification:
Item
Standard

premium product
first-grade product
salable product
typical value

appearance
transparent, oily liquid, slight odor

odor
no odor or slight odor
no odor

ester content %≥
99.5
99
99
99.5


density(20ºC),g/cm3
1.044-1.048



acidity(by benzenedicarbon acid)≤
0.01
0.015
0.03
0.01

flashing point,ºC≥
160


chroma,(platinum-cobalt)≤
20
25
60
20

loss on dry,%≤
0.3
0.5
0.7
0.3


chroma after heat-treating,(platinum-cobalt)≤
100
-------------
100



Application:

It is one kind of strong solvent plasticizer of resins, it can be used in PVS, nitro cellulose, rubber, PEC, ethyl cellulose, . It can be used in paint, adhesivem artificial leather, ink, safe glass, cellulose, dye, insecticide, solvent, lubricant and softener.
We would like to provide the product for you, if you are interested in this product, please kindly contact me as soon as possible.
Sally

Dichloromethane

methylene chloride The product serves for coating solvent, metal degreasing, aerosol, polyurethane foaming agent, safety photogr
Description
Imperial quality
Top quality
High quality
Characteristics
Colorless and clear liquid
Mass fraction of methylene chloride, % ≥
99.99
99.90
99.0
Moisture, % ≤
0.008
0.020
0.050
Acidity (as HCl), % ≤
0.0004
0.0004
0.0008
Chroma (Pt-Co) ≤
10
10
10
Mass fraction of evaporated residue, % ≤
0.0005
0.0005
0.001
Mass fraction of chloride (as Cl
-
), % ≤
0.0005
0.0005
/

Diisononyl Phthalate plasticizer 99%

Diisononyl Phthalate plasticizer 99% is a kind of wildly used plasticizer.
DINP
Product name:Diisononyl Phthalate plasticizer 99%
Molecular Formula: C26H42O4
Appearance : transparent oily liquid
Specification:
Item
Index
Total ester %≥
99.0
Color( Pt-Co)# ≤
40
Density (20°C)g/cm3
0.973-0.977
Flash point (open-cup) °C≥
219
Moisture % ≤
0.2
Use: DINP is main general plasticizer, it can work with PVC and do not be precipitated in large dosage, it has better properties, it is better than DOP in volatile, moving capacity and toxicity. It has benn widely used in toy membrane, wire and cable.

Diisononyl Phthalate plasticizer

Diisononyl Phthalate plasticizer is a kind of wildly used plasticizer.
DINP
Product name:Diisononyl Phthalate plasticizer
Molecular Formula: C26H42O4
Appearance : transparent oily liquid
Specification:
Item
Index
Total ester %≥
99.0
Color( Pt-Co)# ≤
40
Density (20°C)g/cm3
0.973-0.977
Flash point (open-cup) °C≥
219
Moisture % ≤
0.2
Use: DINP is main general plasticizer, it can work with PVC and do not be precipitated in large dosage, it has better properties, it is better than DOP in volatile, moving capacity and toxicity. It has benn widely used in toy membrane, wire and cable.

98%Acrolein dimer

Acrolein dimer,
98% min.
1.Product Name:
Acrolein dimer, 96min / 98% min.
2.Synonyms:
α-Fromy-3,4-dihydio-2H-pyran; 3,4-Dihydio-2H-pyran-2-carboxaldehyde
3. CAS No.:
100-73-2
4. EINECS No.:
202-884-5
5. Molecular Formula:
C
6
H
8
O
2

6. Molecular Structure:

7. M.W:
112.13
8. Properties:
1) Appearance: Color Colorless transparent liquid
2) B.P: 146°C
3) Refractive index: 1.463 (20°C)
4) Flash point: 48 °C
5) Density: 1.08g/cm
3
(25°C)
9. Packing:
25/180/200Kg Plastic drum
10. UN Code:
UN2607 PG III Hazard Class: 3.2
11. HS Code:
2912500090

Diluent

epoxy resin active diulent,material for modified curing agent
Brand
Epoxy equivalent (g/eq)
Hydrolysable chlorine, wt‰ ≤
Inorganic chlorine, wt‰
Color (Gardner)≤
CYDPG-660
140-200
0.5
0.015
0.5
CYDPG-300
285-310
0.1
0.005
0.5

Dimer Fatty Acid

1: Stable Quality
2: Good Price
3: Fast Delivery
4: Professional Service
1: Property: Dimer Fatty Acid ( Dimer Acid) is transparent yellowish liquid, non-toxicity, high viscosity, high flash point.

2: It is mainly used in the manufacture of reactive and non reactive polyamide resin, adhesive
lubricant agent,surfactants,corrosion inhibitors,alkyd resin, polyol esters,oil filed drilling muds
and personalare.


3: Specification

Acid Value(mg KOH/g): 188-198

Saponification Value(mg KOH/g): 190-203

Color(Gardner) ≤ 8

Viscosity(mPa.s 25°C): 3000-8000

Dimer Acid Content: 75%-82%

Monomer Acid Content: 1%-5%

Trimer Acid Content: 13%-17%

Dimethyl Silicone Oil

Dimethylpolysiloxane various viscosity according to customer's requirements

Product Name
Dimethyl Silicone Oil NB-8201

Main Composition
Dimethylpolysiloxane

Basic Character

Appearance: Colourless transparent liquid
Viscosity(25,mm2/s): 200-5000
Density(25,g/cm3): 0.931-0.985
Refractive index: 1.3900-1.4200

Advantages
(1) Excellent lubricating property,soft property, leveling property, gloss property. It has good waterproof effect.
(2) Dry and no oily feel. It is good skin-protect agent.
(3) Emulsified into steady and transparent latex by high speed stirrer or homogenizer.

Use Area
(1) Coating on the wire connector to prevent leakage; coating on the surface of insulator to improve surface resistivity.
(2) Coating on glasswork to prevent water and mould when
(3) The hydrophobic nature and flexibility of glass fibre will be improved after the treatment by our product.
(4) Used as quakeproof of appearance of airplane and car and used as transfer medium of signal to transfer the press and temperature of Auto-control appearance.
(5) Used as lubricant of axletree of metal and plastic, replace the brake liquid Ethylene glycol, used as brake oil.
(6) Used for dipping fibre of textiles, it can reduce attrition. It prevents fuzz, broken, and it is antistatic.
(7) Used as element of polishing agent of car, furniture, metal, glass, plastic, leather, floor,etc. It can improve the brightness when added to the polishing oil. Coat easily and protect the film from the environment effect. It can improve the brightness of film and it has effect of crinkle when added to the oil paint.
(8) Used for deforming in many industries.
(9) Used as demolding agent of moulding processing for kinds of rubber and plastic.
(10) In personall care aspect, it can used for lipstick, lip balm, shampoo, mouthwash, eye ointment, greasing of eyebrow draw, hair care product, etc. For example, it can improve the lubrication and protection role on the skin when added to the hair care product, skin care product and anti-sweat agent, etc.

Use Method
(1) Silicon Oil together with emulsifying agent and auxiliary agent can be emulsified to water latex of different concentrations. During the emulsification, the mixture of silicone oil and emulsifying agent should be uniform, adding the water slowly and uniformly.
(2) It can be applied by silicone oil, or water latex according to the requirements.

Dimethyl hydroxy-terminated (107 SILICONE GUM)

dimethyl hydroxy-terminated 107 SILICONE GUM
Viscosity :20,000cps
50,000cps
80,000cps
Dimethyl hydroxy-terminated (107 SILICONE GUM)

Viscosity
:3000 cps
20,000cps
50,000cps
80,000cps
Volatile
: <=2%

Appearance
:Crystal clear fluid
Applications
:It is a bsic material for manufacture of RTV-1,RTV-2 etc...It can solidify together with crosslinking agents and activators at room temperature. It can remain elasticity for a long time at the temperature range of -60~200°C with excellent electrical performances and chemical stability and property of waterproof, odor resistance and weather proof resistance.

Dimethyl silicone oil (201)

Dimethyl silicone oil (201) appearance : colorless ,transparent ,oil without the odor of liquid .
Dimethyl silicone oil (201)
Content : 99.99%
Product code:STU-201
Because of Dimethyl silicone oil has an excellent physical properties can be directly moisture-proof insulation ,damping ,shock absorption ,from grinding ,anti -foaming ,lubrication ,polishing ,etc.
Direct use of Dimethyl machine ,the machine in order to enablethe dimethyl silicone oil dispersion ,and ease of dipping ,spraying and improve efficiency ,can also math the general solution ,lipids ,use of three types of emulsion to provide a variety of viscosity.
Usage : insulating oil ,lubrication oil ,damping oil ,shock -proof oil ,defoaming oil ,demoulding oil ,mineral oil ,additives .
Antifoamer efficient in precision machinery and instrumentation used to prevent vibration ,damping ,lubrication ,transmission and so on ,high -temperature off grinding agent .
Surface treatment agent ,in the paint ,grease ,cosmetics and other products as additives to improve flow -ping ,silky properties ,provide a variety of viscosity

Dioctyl Adipate(DOA)

Dioctyl Adipate(DOA) HIGH QUALITY
Appearance:Transparent Oily Liquid
THE BIGGEST MANUFACTURER
Product name:
Dioctyl Adipate(DOA)
Molecular Formula: C22H42O4
Appearance : Transparent Oily Liquid

Specification
Index
Color(PT-CO)
≤50
≤30
Ester Content %
≥99.0
≥99.5
Density (20°C) g/cm3
0.924-0.929
Acidity (calculated as phthalic acid)g/cm3
≤0.024
≤0.012
Heat loss %
≤0.3
≤0.2
Flash point (°C)
≥192
≥195
Use: The typical cold resisting plasticizer for vinyl chloride polymer and its copolymer,polystyrene,cellulosic resins and synthetic rubbers. It imparts a high plasticizing efficiency,less colour change during light and heat attack,good softening property at low temperature.
Packing: In 200KG/galvanized iron drum.

Dioctyl Phthalate (DOP) Premium Grade

Dioctyl Phthalate (DOP) Premium Grade
1, Free Sample
2, Manufacturer offer with SGS PSI for Quality and Quantity
3, ISO9001
Product name: Dioctyl Phthalate (DOP) Premium Grade
Molecular Formula :
C
24
-H
38
-O
4
CAS :
117-81-7
Appearance:
Transparent oily liquid
Specifications:
Index name
Value
Premium grade
First grade
Salable product
Color(APHA) ≤
30
40
120
Ester %
99.5
99.0
99.0
Acidity(Benzene dicarbonic acid) g/cm
3
0.010
0.015
0.030
Loss on dry(125°C3hr)% ≤
0.2
0.3
0.5
Flash point(open) °C ≥
195
192
190
Sg D
30

MD
0.982-0.988
0.982-0.988
0.982-0.988
Volume resistivity 0.0m ≥
0.20
0.20
0.30
Use:
It is an important and primary plasticizer, mainly used in the processing of PVC resins, chemical fiber resins, ABS resins and rubber. And plasticized PVC can be used in the manufacture of leatheroid,agricultural film,packing materials and cables.

Packing:
In 200KG/galvanized metal pail.

Dioctyl Phthalate (DOP) Top Grade 99.5%

Dioctyl Phthalate (DOP) Top Grade
1, Free Sample
2, Manufacturer offer with SGS PSI for Quality and Quantity
3, ISO9001:2000
Product name: Dioctyl Phthalate (DOP) Top Grade
Molecular Formula :
C
24
-H
38
-O
4
CAS :
117-81-7
Appearance:
Transparent oily liquid
Specifications:
Index name
Value
Premium grade
First grade
Salable product
Color(APHA) ≤
30
40
120
Ester %
99.5
99.0
99.0
Acidity(Benzene dicarbonic acid) g/cm
3
0.010
0.015
0.030
Loss on dry(125°C3hr)% ≤
0.2
0.3
0.5
Flash point(open) °C ≥
195
192
190
Sg D
30

MD
0.982-0.988
0.982-0.988
0.982-0.988
Volume resistivity 0.0m ≥
0.20
0.20
0.30
Use:
It is an important and primary plasticizer, mainly used in the processing of PVC resins, chemical fiber resins, ABS resins and rubber. And plasticized PVC can be used in the manufacture of leatheroid,agricultural film,packing materials and cables.

Packing:
In 200KG/galvanized metal pail.


Dioctyl Phthalate (DOP) first Grade

Dioctyl Phthalate (DOP) first Grade
1. Free Sample
2. Maufacuer with SGS inspection for quality and quantity
3. ISO9001:2000
Product name: Dioctyl Phthalate (DOP) first Grade
Molecular Formula :
C
24
-H
38
-O
4
CAS :
117-81-7
Appearance:
Transparent oily liquid
Specifications:
Index name
Value
Premium grade
First grade
Salable product
Color(APHA) ≤
30
40
120
Ester %
99.5
99.0
99.0
Acidity(Benzene dicarbonic acid) g/cm
3
0.010
0.015
0.030
Loss on dry(125°C3hr)% ≤
0.2
0.3
0.5
Flash point(open) °C ≥
195
192
190
Sg D
30

MD
0.982-0.988
0.982-0.988
0.982-0.988
Volume resistivity 0.0m ≥
0.20
0.20
0.30
Use:
It is an important and primary plasticizer, mainly used in the processing of PVC resins, chemical fiber resins, ABS resins and rubber. And plasticized PVC can be used in the manufacture of leatheroid,agricultural film,packing materials and cables.

Packing:
In 200KG/galvanized metal pail.

Tuesday, September 27, 2011

Dioctyl Phthalate 99.5%

Dioctyl Phthalate Plasticizer
Free sample
ISO manufactuer with SGS inspection
Product name: Dioctyl Phthalate (DOP)
Molecular Formula :
C
24
-H
38
-O
4
CAS :
117-81-7
Appearance:
Transparent oily liquid
Specifications:
Index name
Value
Premium grade
First grade
Salable product
Color(APHA) ≤
30
40
120
Ester %
99.5
99.0
99.0
Acidity(Benzene dicarbonic acid) g/cm
3
0.010
0.015
0.030
Loss on dry(125°C3hr)% ≤
0.2
0.3
0.5
Flash point(open) °C ≥
195
192
190
Sg D
30

MD
0.982-0.988
0.982-0.988
0.982-0.988
Volume resistivity 0.0m ≥
0.20
0.20
0.30
Use:
It is an important and primary plasticizer, mainly used in the processing of PVC resins, chemical fiber resins, ABS resins and rubber. And plasticized PVC can be used in the manufacture of leatheroid,agricultural film,packing materials and cables.

Packing:
In 200KG/galvanized metal pail.

99.5% vinyl chloride resin

1.Hot chemical PVC Resin
2.Professional manufacturer
3.ISO Certificate and COA provided
4.reasonable price
Application:
It was widely be used in the industries of paint, coating, industrial repair paint, marine paint, wooden surface paint, paper paint, metal decorate paint, container paint, adhesive for PVC/ armor plate, adhesive for tape etc..

Technical data:
Type
SG5
K-Value
66-68
Polymerization Degree
1100-1000
Impurity Particle number (piece)
≤16
Volatile Matter(including water)
≤0.40%
Bulk Density( g/ml )
≥0.45
Residue of VCM
≤8ppm




Dioctyl Phthalate DOP 99.5%

Packaging Detail: Net Wt 200kg iron drums
Delivery Detail 15-21 days after receiving advance payment or
Packaging & Delivery
Packaging Detail:
Net Wt 200kg iron drums
Delivery Detail
15-21 days after receiving advance payment or L/C
Specifications
Dioctyl Phthalate DOP
Corloless or slightly yellow transparent oily liquid
soluble in ethanol, ether, mineral oil
Dioctyl Phthalate DOP
Corloless or slightly yellow transparent oily liquid,
the proportion of 0.9861(20/20), -55 metlting point of 370(atmospheric pressure),
do not dissolve in water, soluble in ethanol, ether, mineral oil, the majority of organic solvents.

ITEMS

99.5%

99%

Color(APHA)

30 Min

40 Min

Ester

99.5%Min

99%Min

Acidity (benzene dicarbonic acid)

0.01%Max

0.015%Max

Loss on dry (125 o C3hr)

0.2%Max

0.3%Max

Flash point(open) o C

195Min

192Min

Sg D 30
MD

0.982-0.988

0.982-0.988

Volume resistivity: Ω.m
0.20 Min

---
Jessica

Dioctyl Phthalate Premium Grade

Dioctyl Phthalate DOP
1. Free Sample
2. Manufacturer offer with SGS PSI for quality and quantity
3. ISO9001:2000
Product name: Dioctyl Phthalate Premium Grade
Molecular Formula :
C
24
-H
38
-O
4
CAS :
117-81-7
Appearance:
Transparent oily liquid
Specifications:
Index name
Value
Premium grade
First grade
Salable product
Color(APHA) ≤
30
40
120
Ester %
99.5
99.0
99.0
Acidity(Benzene dicarbonic acid) g/cm
3
0.010
0.015
0.030
Loss on dry(125°C3hr)% ≤
0.2
0.3
0.5
Flash point(open) °C ≥
195
192
190
Sg D
30

MD
0.982-0.988
0.982-0.988
0.982-0.988
Volume resistivity 0.0m ≥
0.20
0.20
0.30
Use:
It is an important and primary plasticizer, mainly used in the processing of PVC resins, chemical fiber resins, ABS resins and rubber. And plasticized PVC can be used in the manufacture of leatheroid,agricultural film,packing materials and cables.

Packing:
In 200KG/galvanized metal pail.

Dioctyl Phthalate first grade

Ddioctyl Phthalate Plasticizer
1. Free Sample
2. Manufacturer offer with SGS PSI for quality and quantity.
3. ISO9001:2000
Product name: Dioctyl Phthalate (DOP) first grade
Molecular Formula :
C
24
-H
38
-O
4
CAS :
117-81-7
Appearance:
Transparent oily liquid
Specifications:
Index name
Value
Premium grade
First grade
Salable product
Color(APHA) ≤
30
40
120
Ester %
99.5
99.0
99.0
Acidity(Benzene dicarbonic acid) g/cm
3
0.010
0.015
0.030
Loss on dry(125°C3hr)% ≤
0.2
0.3
0.5
Flash point(open) °C ≥
195
192
190
Sg D
30

MD
0.982-0.988
0.982-0.988
0.982-0.988
Volume resistivity 0.0m ≥
0.20
0.20
0.30
Use:
It is an important and primary plasticizer, mainly used in the processing of PVC resins, chemical fiber resins, ABS resins and rubber. And plasticized PVC can be used in the manufacture of leatheroid,agricultural film,packing materials and cables.

Packing:
In 200KG/galvanized metal pail.

Dioctyl phthalate

Colorless liquid oily shape
Quality indicator: GB11406-89
Outside view transparent, found no impurity oily shape liquid

Dioctyl phthalate

Colorless liquid oily shape
Quality indicator: GB11406-89
Outside view transparent, found no impurity oily shape liquid
Colorless liquid oily shape
Quality indicator: GB11406-89
Outside view transparent, found no impurity oily shape liquid
DOP is general-purpose plasticizer, mainly used for PVC fat processing, can also be used to change to resin, acetic acid resin, ABS resin and rubber polymer processing, can also be used to make lacquer, dyestuff, dispersant, etc, DOP increase can be used in the manufacture of plastic PVC leather, agricultural plastic films, packaging materials, cable
With tank trucks shipment, the goods shall be deposited in the ventilation and dry place, away from fire.

Dioctyl phthalate

It is one of most popular plasticizer,It can be used in PVC, PE and cellulosr, such as film, cable, artificial leather, pipe, sh
Index name
Value
Premium grade
First grade
Salable product
Appearance
transparent oily liquid
Color(APHA)≤
30
40
120
Ester %
99.5
99.0
99.0
Acidity (? Benzene dicarbonic acid) g / cm
3
0.010
0.015
0.030
Loss on dry (125
of
3HR)% ≤
0.2
0.3
0.5
Flash point (open)
o
C ≥
195
192
190
Sg D
30
MD
0.982-0.988
0.982-0.988
0.982-0.988
volume resistivity 0.0m≥
0.20
0.20
0.30

Dipute Fabric Repair Strips

Ideal for the repair of puncture or gouge damage to the conveyor belt as well as longitudinal rips.

Features


1.Won’t damage the conveyor belt
2.Allows the belt to be back in service in a matter of hours
3.The repair may last as long as the original belt remains in service
4.All strips feature a bonding layer which offers excellent adhesion to the conveyor belt
5.Repair strips are available in various widths

Item
Width(mm)


327511
100


327512
150

327513
220

327514
300

327515
400

Dispersant agent: Anionic PAM

Anionc A2520P:
1.Inionic degree:22-26%(Mole)
2.MW:19-23million
3.Insolubility:Less than 0.1%
4.Specific Viscosity:13 dL/g
A2520P Anionic polyacrylamide

Quality Index
moddle
Appearance
Solid content (%)
Hydrolysis degree (%)
Molecular weight
Residual monomer content (%)
Dissolution time(hr)
A2520P
White grain
≥89
22-26
19-23
≤0.05
≤1

Application
1. Industrial wastewater treatment. The effect is significant especially for wastewater with neutral or alkaline pH value, large suspended particles, high concentration and positive charge, such as wastewater of steel plants, electroplating plants, metallurgical plants and the coal washing plant.
2. Drinking water treatment. Use this product to deal with raw water, which has advantages of small dose, low-cost, no secondary pollution, etc.
3. Papermaking additive. It can used as dispersant of long fiber paper, dry strengthen agent, retention and drainage agent and flocculant for papermaking wastewater,etc

Instruction for use
1. It's very important to make the efficient dispersion during using, otherwise will cause agglomerate and "fish eyes", dissolving time will be longer.
2. Lowhardness water for use; avoid adopting such tank or pool, which will influence on water quality.
3. Improve the water temperature to accelerate the dissolving velocity, but not exceed 50°C.
4.Stirring will accelerate dissolving, but tough stirring will make the dispersant chain broken and degradation. Shipshape agitator with 200 - 500 rpm is the best choice.
5. Commonly mix the product into 0.05%-0.5%(w/w)solution as reserve.
6.Adjust the optimum dosage of product according to application condition.

Product package
25 Kg bags, or according to users’ requirement; Its shelf life is 2 years.


Dispersant agent

dispersant agent:
1.Molecular Weight:19-23million
2.Surface viscosity:11-15cps
3.insolubility:<0.13%
1.Describe:
The best quality products in China, used as paper dispersant agnet.
2.Index:
1)Molecular Weight(Miliion):19-23
2)Solid Content%:>89%
3)Inionic degree(Mole) %: 28-32
4)Filtration ratio:≤2.0
5)Surface viscosity mPa.s:11-14
6)Residual monomer: <0.13%
3.Product package:
The product is packaged with paper plastic three-in-one compound woven bags, and 25 Kg in each bag or determination in accord with the user’s requirement. Its shelf life is 2 years.
4.Attention:
The product is moisture absorbent, thus to protect from damp and moist for conservation. It should be stored at a dry and ventilate storehouse, and not be exposed to air and sunshine.

Disproportionated Rosin

Disproportionated Rosin is a natural organic compound distilled from pine gum which is widely used as basic raw material.
Disproportionated Rosin

Disproportionated Rosin
Disproportionated Rosin
(ex Pinus Massoniana)
Appearance:transparent
Color(species standard);light yellow
Softening point(R and B,deg C);76.0 min.
USAGE
Paint,ink,rubber,paper,soap,
Organic synthesis,etc.
Acid value(mg/g);166 min.
Unsaponiflable matters:5.0% max.
Insoluble matter in alcohol:0.030% max
NORM
[C
19
H
29
COOH]
Dirt matters:0.020% max.
PACKAGE:225kg galvanized drum or 25kg bag.




Rosin (also known as colophony) is a solid resinous material obtained from the oleoresin (tree sap) of live pine trees (called gum rosin), the stump wood of dead pine trees by solvent extraction (called wood rosin), and in the pulp paper recovery process (called tall oil rosin).
USAGE:
The rosin is used directly in the manufacturing of adhesives, inks, rubber compounds, paints & coatings, etc., or modified as resins to give more specific characteristics to the rosin to improve or change their stability, aging, color, tackiness, and so forth to be used in the above-mentioned products.






99.5% DOP (Dioctyl Phthalate) in low price

Colorless liquid oily shape
Quality indicator: GB11406-89
Outside view transparent, found no impurity oily shape liquid

DOP
It is also called Dioctyl Phthalate

Specification
Product name: Dioctyl Phthalate 99.5%
Molecular Formula : C24-H38-O4
CAS : 117-81-7
Appearance: Transparent oily liquid
Index name
Value
Premium grade
First grade
Salable product
Color(APHA) ≤
30
40
120
Ester %
99.5
99.0
99.0
Acidity(Benzene dicarbonic acid) g/cm
3
0.010
0.015
0.030
Loss on dry(125°C3hr)% ≤
0.2
0.3
0.5
Flash point(open) °C ≥
195
192
190
Sg D
30

MD
0.982-0.988
0.982-0.988
0.982-0.988
Volume resistivity 0.0m ≥
0.20
0.20
0.30

Packing:200kg iron drum
Use:
It is an important and primary plasticizer, mainly used in the processing of PVC resins, chemical fiber resins, ABS resins and rubber. And plasticized PVC can be used in the manufacture of leatheroid,agricultural film,packing materials and cables.

Domestic RO Membrane

Water Filter Reverse Osmosis Membrane
Reverse Osmosis membrane
prompt reply
small order accepted
WATER FILTER REVERSE OSMOSIS MEMBRANE

RO membrane
is widely used in small water treatment equipment such as pure water dispenser, hospital, laboratory pure water equipment.

RO membrane
is mainly used for Desalination treatment.

Packing:
25pieces/box



Dow Cellulose Ether

1, 20 years experience in cellulose area
2, EU standard lab
3, Experts from USA for technical support
Cellulose Ether/HPMC from the manufacturer with 20 years experience, is used as a crucial additive for building materials, paint
Cellulose Ether/HPMC


What it is:

GinShiCelare types of cellulosederivatives known as cellulose ethers,specifically Methyl Cellulose(MC), Hydroxy Propyl Methyl Cellulose(HPMC), Hydroxyethyl Cellulose(HEC), and Hydroxy Ethyl MethylCellulose (HEMC) made by steps below:.
Soak the pure cellulose (purified cotton / wood pulp) in an aqueous caustic soda and organic solvent mix.
React the resultant alkaline cellulose with etherifying agents, such as alkyl halides or alkylene oxides,
Recover the solvents and wash the product,
Dry and mill the ethereified product.
What it does:

GinShiCelcelluloseethers provides thickening power, water retention ability,consistencydevelopment, suspension power, emulsion development,protective colloid,film formation, lubrication, solutionstabilization, and various otherfunctions.

How it functions:

Uponeachcellulose ether molecule are the cellulose chain, and the ethergroup,such as the methoxy, the hydroxypropoxy, the hydroxyethoxygroups. Themethoxy group, hydroxyethoxy group, and hydroxypropoxygroups act aswater gatherers, although their ability to gather watervary greatly bytype and number. These water gatherers, which areattached to aentangled backbone of cellulose chain, form a temporarybond between thewater molecule and itself. In doing so, water isphysically trapped bythis cellulose ether molecule. Thus, thewaterborne particles which aredissolved in water is also trapped, byvirtue of the flexible butentangled nature of the cellulose chain.This way, water is in effectretained, and emulsion and suspension isachieved, and because of thefriction force needed to smooth thecellulose chain, the solution isthickened, and pseudoplasticity is achieved.

How it is used:

GinShiCelapplicationsare primarily focused on building materials and paints,although it hasa wide range of industrial applications including, not limited to:
Building material
Paint
Oil field operations
Coatings
Leather making
Ceramics
Agriculture
PVC
Building material usages:
Plasters, Renders, & Stucco:
Base plasters
Decorative Finish Plasters
Repair Plasters
Insulating Renders
Adhesives:
Tile Adhesives
EIFS Adhesives
Wallpaper Adhesives
Jointing & Filling Compounds:
Self-leveling compounds
EIFS leveling compounds
Wall leveling compounds
Grouts
Special Applications:
Underwater Concrete
Extruded Construction Elements
Paint Removers

Dow chemicals MHEC MKX 15000 PF 01

HEMC from the manufacturer with 20 years experience, is used as a crucial additive for building materials ,meets various demands
What it is:

GinShiCelare types of cellulosederivatives known as cellulose ethers,specifically Methyl Cellulose(MC), Hydroxy Propyl Methyl Cellulose(HPMC), Hydroxyethyl Cellulose(HEC), and Hydroxy Ethyl MethylCellulose (HEMC) made by steps below:
Soak the pure cellulose (purified cotton / wood pulp) in an aqueous caustic soda and organic solvent mix.
React the resultant alkaline cellulose with etherifying agents, such as alkyl halides or alkylene oxides,
Recover the solvents and wash the product,
Dry and mill the ethereified product.
What it does:

GinShiCelcelluloseethers provides thickening power, water retention ability,consistencydevelopment, suspension power, emulsion development,protective colloid,film formation, lubrication, solutionstabilization, and various otherfunctions.

How it functions:

Uponeachcellulose ether molecule are the cellulose chain, and the ethergroup,such as the methoxy, the hydroxypropoxy, the hydroxyethoxygroups. Themethoxy group, hydroxyethoxy group, and hydroxypropoxygroups act aswater gatherers, although their ability to gather watervary greatly bytype and number. These water gatherers, which areattached to aentangled backbone of cellulose chain, form a temporarybond between thewater molecule and itself. In doing so, water isphysically trapped bythis cellulose ether molecule. Thus, thewaterborne particles which aredissolved in water is also trapped, byvirtue of the flexible butentangled nature of the cellulose chain.This way, water is in effectretained, and emulsion and suspension isachieved, and because of thefriction force needed to smooth thecellulose chain, the solution isthickened, and pseudoplasticity is achieved.

How it is used:

GinShiCelapplicationsare primarily focused on building materials and paints,although it hasa wide range of industrial applications including, not limited to:
Building material
Paint
Oil field operations
Coatings
Leather making
Ceramics
Agriculture
PVC
Building material usages:
Plasters, Renders, & Stucco:
Base plasters
Decorative Finish Plasters
Repair Plasters
Insulating Renders
Adhesives:
Tile Adhesives
EIFS Adhesives
Wallpaper Adhesives
Jointing & Filling Compounds:
Self-leveling compounds
EIFS leveling compounds
Wall leveling compounds
Grouts
Special Applications:
Underwater Concrete
Extruded Construction Elements
Paint Removers

Drilling Fluid Additives Anionic Polyacrylamide APAM

1.Good water solubility
2.Excellent flocculability
3.No pollution to environment
4.Low residual monomer content
Polyacrylamide
, a polymer with macro molecular weight,is divided into cationic polyacrylamide, anionic polyacrylamide, non-ionic polyacrylamide because of difference of ion features.

Anionic polyacrylamide
is a high degree of polymerization of linear water-soluble synthetic polymers. APAM also can be dissolved in methanol and ethanol, but can not be dissolved in ketones, esters, hydrocarbons and other organic solvents. Its molecular weight is between 6-22million. It is mainly used for petroleum exploitation, chemical engineering, coating, wastewater treatment ,etc

Applications:
1. Textile, carpet industry
2. Oil field exploration and development
3. Sugar syrup for the industry to clarify the agent
4. Oil field water treatment to deal with the recovery of oil
5. Industry waste water purification, urban sewage purification
6. Paper-making industry for the clarification of liquid caustic soda

Usage method:
As for the solid product/APAM, dilution is necessary before being dosed. Water amount for dilution shall be determined based on the amount of the chemical to be dosed and the quality of water to be treated. Dilution proportion for solid product is 0.1%-0.5%.


Specifications:

Trademark
Molecular Weight (million)
(adjustable)
Degree of Hydrolysis
(adjustable)
Solid Content%
Effective PH Range
Residual Monomer Content%
MQ-A21
20-22
35-40

≥88%

7-14
≤0.05%
MQ-A19
18-20
25-35
MQ-A17
15-18
20-25
MQ-A15
10-15
18-20
MQ-A09
8-10
15-18
MQ-A07
5-8
12-15
MQ-A05
3-5
6-12

Packing:
1.25kg/bag (pp woven bag ) or packaged by the requirements of customer
2. Avoid contact with metals such as iron and aluminum




Drilling Fluid Additives Copolymer 80A-51 Powder

A better clay capsulating agent with high molecular weight used to treat low solid drilling fresh water mud .
Copolymer of acrylamide and sodium polyacrylate
80A-51

is a macromolecule polymer. It can be compatible with other drilling fluid finishing agent and has a good thickening effect of fluid. In addition, it can improve ROP, prevent borehole enlargement, reduce down hole problems and cut mud costs. It can be easily dissolved in water with high molecular weight, but it can not be dissolved in ketones, esters, hydrocarbons and other organic solvents.
It is used to treat low solid drilling fresh water mud as anti-caving agent, flocculant, viscosifier.

Advantages:
1. Better clay capsulating agent
2. Excellent antistaining and heat resistance
3. Good settleability, flocculability and shear thinning.

Specifications:
Item
Index
Appearance
white or slight yellow free flow powder
Inherent viscosity , dl/g
≥6.0
Moisture, %
≤8.0
Fineness(Residue on 0.9mm sieve), %
≤5.0
Apparent viscosity, mPa.s
Normal temperature
≥35
boiling in 120
o
C for 16h
≥25
Plastic viscosity , mPa.s
Normal temperature
≥17
boiling in 120
o
C for 16h
≥12
Yield value, Pa
Normal temperature
≥18
boiling in 120
o
C for 16h
≥10
Loss on filtration, ml
Normal temperature
≤25
boiling in 120
o
C for 16h
≤35

Other Products:
1. Cationic Polyacrylamide, Anionic Polyacrylamide, Non-ionic polyacrylamide
2. Copolymer of polyacrylamide and sodium polyacrylate 80A-51
3. Hydrolyzed Polyacrylonitrile Ammonium Salt NH4-HPAN
4. Hydrolyzed Polyacrylonitrile Sodium Salt Na-HPAN
5. Potassium Polyacrylate K-PAM
6. Sulfonated Gilsonite Powder
7. Carboxymethyl cellulose (CMC)
8. Polyaluminium Chloride (PAC)
9. Complex Ionic Acrylate FA-367
10. Fluid Loss Additives SL-ll
11.Potassium Humate (HA-K)

Drilling Fluids PAC

Drilling Fluids PAC
Oil Drilling Fluids Chemicals
H.S Code:39123100
Certificate: ISO 9001:2008, SGS
Stable up to 130 oC
Drilling Fluids PAC
We manufacture and export different grades PAC (Polyanionic Cellulose) and CMC (Sodium Carboxymethyl Cellulose).

Products list
Here are the different grades of CMC and PAC:
No.
Products
Application
1
PAC R
Applicable to Oil drilling fulids (pac)
2
PAC LV
Applicable to Oil drilling fulids (pac)
3
CMC Drilling fluids grade
Applicable to Oil drilling fluids (cmc)
4
CMC Building grade
Applicable to build (cmc)
5
CMC Paint grade
Applicable to Latex paint, coating (cmc)
6
CMC Detergent grade
Applicable to detergent (cmc)
7
CMC Ceramic grade
Applicable to ceramics (cmc)
8
CMC Food grade
Applicable to food additive (cmc)
9
CMC Cigarette grade
Applicable to cigarette (cmc)
10
CMC Mosquito-repllent incense grade
Applicable to mosquito-repllent incense (cmc)
11
CMC Electric welding grade
Applicable to electric welding (cmc)
12
CMC Paper grade
Applicable to paper coating, sizing and strength additive (cmc)
13
CMC Textile grade
Applicable to textile printing, coating (cmc)

Our PAC R and PAC LV are of good quality and competitive price.
Non fermenting non-polluting, free flowing powder.
PAC R is stable up to 130
o
C.

Drilling fluid Sulfonated phenolic resin(SMP-11)

1)high quality with resonable price
2) oil drlling chemicals
3) sulfonated phenolic resin
4) anti-collapse
Product performance and quality indicators: in the deep under the conditions of high temperature and pressure of the fluid loss with good lubrication, stability and rheological properties of the special effects. As the polymer is sulfonated products, but also a certain anti-collapse properties.
Appearance: free flowing powder, 10% aqueous solution of the color brown
Dry agent content: ≥ 90.0%
Water insoluble: ≤ 8.0%
Cloud point salinity: ≥ 160g / 1
Apparent viscosity: ≥ 50.0mpas
High temperature and high pressure filtration Loss: ≤ 35.0ml
Usage:1. The product can be directly applied to a variety of water-based drilling fluid system
2. Salt from saturated brine, and modified lignite, sulfonated tannin, acid wood, brown coal resin treatment agent used in conjunction with better results
3. Generally increase 2.0% -3.0%

Drilling fluid Sulfonated phenolic resin(SMP-I)

1)high quality with resonable price
2)cetifaiction:SY/5656-93
3) used in oil drilling
4)Prevent collapse
5)lubricant
Product performance and quality indicators: in the deep under the conditions of high temperature and pressure of the fluid loss with good lubrication, stability and rheological properties of the special effects. As the polymer is sulfonated products, but also a certain anti-collapse properties.
Appearance: free flowing powder, 10% aqueous solution of the color brown
Dry agent content: ≥ 90.0%
Water insoluble: ≤ 10.0%
Cloud point salinity: ≥ 100g / 1
Apparent viscosity: ≥ 25.0mpas
High temperature and high pressure filtration Loss: ≤ 25.0ml
Usage:1.This product can be directly applied to less than 100,000 ppm salinity, water-based drilling fluid system
2. The product and modified lignite, sulfonated tannin, acid wood, brown coal resin treatment agent used in conjunction with a better effect
3. May be resistance to temperature 200 degrees Celsius, and the general increase of 1.0% -3.0% volume

Dringking water Ion Exchange Resin

Drinking water Ion Exchange Resin
Food grade, meet the FDA standard
Water purification, desalination,demineralization
Drinking water Ion Exchange resin

1. Resin for Food Grade can meet FDA standard of U.S.A.

2. Resin for Food Grade complies with Sanitary Supervision and Management Regulation for Drinking Water of Chinese health authorities and has been issued Food Hygiene Approval Permit.
3. Food Grade Ion Exchange Resin doesn’t contain substances which are harmful to human body and tainted.
4. It has been widely used in decolorization, demineralization, softening aspect in food, drinking water and some other industries.
5. Quality Inspection Staff Seeking Ever Greater Perfection: Each inspector had to go through rigorous technical training so as to foster and seeking ever greater perfection and in turn to strictly control product quality.
6. Inspection of raw materials: Rigorous inspection of raw materials is the foundation of product quality

Packing
25liter PE bags

Contact
Tel:0086-351-3343082
Fax:0086-351-3343281

Dringking water safe Ion Exchange Resin

Food grade ion exchange resin
Meet FDA standard
Drinking water treatment
For food industry, drinking water industry
Food grade Ion exchange resin 001*7

1. Resin for Food Grade can meet FDA standard of U.S.A.
2. Resin for Food Grade complies with Sanitary Supervision and Management Regulation for Drinking Water of Chinese health authorities and has been issued Food Hygiene proval Permit.
3. Food Grade Ion Exchange Resin doesn’t contain substances which are harmful to human body and tainted.
4. It has been widely used in decolorization, demineralization, softening aspect in food, drinking water and some other industries.
5. Quality Inspection Staff Seeking Ever Greater Perfection: Each inspector had to go through rigorous technical training so as to foster and seeking ever greater perfection and in turn to strictly control product quality.
6. Inspection of raw materials: Rigorous inspection of raw materials is the foundation of product quality.


Application:
Mainly used for drinking water softening and desalination, and antibiotic extracting, etc.

Specification

NO.
ITEM
SPEC
1
Type
Strongly acidic
2
Matrix
Polystyrene
3
Function group
-SO
3
-
4
Ionic form
Na
+
5
Moisture content (%)
45-55
6
Quality Total Exchange Capacity (mmol/g)
≥4.5
7
Total exchange capacity (mmol/ml)
≥1.9
8
Defined Shear Rate (%)
≥90
9
Bulk Density (g/ml)
0.75-0.85
10
True Density (g/ml)
1.25-1.30
11
Particle Size Range (%)
0.315-1.25 mm≥90
12
Applicable PH
1-14

Comparison:
Bayer: S100LF Purolite: C100E Amberlite: SR1L

Packing:
1.PE bags (25liter)
2.PE valve bags (25liter)

Picture

Contact
Tel:0086-351-3343081 0086-351-3343082
Fax:0086-351-3343281
Website: www.lanlangcorp.com.cn

99.5% Dioctyl Phthalate/DOP

99.5% Dioctyl Phthalate/DOP
1.Standard:GB11406-89 POLYMER
2.CAS No.:117-81-7
3.Use:most popular plasticizer
4.Purity:99.5%
99.5% Dioctyl Phthalate/DOP
Dioctyl Phthalate
1.CAS No.:117-81-7
2.Standard:GB 11406-89
3.Apperance:Colorless oily liquid
4.Purity:99%-99.5%
5.Specification:
Item
Index
General Grade
Electric Grade
Food Grade
Medical Grade
Appearance
Transparency liquid, No suspended substance
Odor
Odorless or slight odour
Odorless
Purity≥%
99.5
99.5
99.5
99.5
Density20, g/cm³
0.983-0.985
Acidity (mgKON/g)≤
0.07
0.05
0.05
0.02
Water content,%≤
0.1
Chroma,
(Platinum-cobalt )
40
40
20
20
Refractive index20%
1.486-1.487
Viscosity20mPa.s
77-82
Volume resistivity,*10.9m
-----
≥1.5
-----
-----
UV absorption value220-230nm
---------------------
0.
6.Application:
It is one of most popular plasticizer, it has excellent performance, such as good blending capacity, high efficiency, low volatility, anti cold and hot, low offset, waterproof and anti-UV, good electrical capacity. It can be used in PVC, PE and cellulosr, such as film, cable, artificial leather, pipe, sheet material, mold plastic, or used as softener of rubber
7.Packing:
200kg /Drums, 16 MT/20’FCL
8.Shippment: Within 2-3 weeks after we get your prepayment.

If there are any other questions, plz do not hesitate to let us know.
Emily

Drinking Water Ion Exchange Resin

Abstraction Lysine Resin 001x8
Strongly Acidic Cation Resin 001x8
CertifIed by FDA standard of U.S.A
Delivery timely
Food Grade Ion Exchange Resin


1.Resin for Food Grade can meet FDA standard of U.S.A.
2.Resin for Food Grade complies with Sanitary Supervision and Management Regulation for Drinking Water of Chinese health authorities and has been issued Food Hygiene Approval Permit.
3.Food Grade Ion Exchange Resin doesn’t contain substances which are harmful to human body and tainted.
4.It has been widely used in decolorization, demineralization, softening aspect in food, drinking water and some other industries.
5.Quality Inspection Staff Seeking Ever Greater Perfection: Each inspector had to go through rigorous technical training so as to foster and seeking ever greater perfection and in turn to strictly control product quality.
6.Inspection of raw materials: Rigorous inspection of raw materials is the foundation of product quality.

Applications:
Used in abstracting lysine, with excellent absorption capacity for lysine and long service period.

Specification
NO.
ITEM
SPEC
1
Type
Strongly acidic
2
Matrix
Polystyrene
3
Function group
-SO
3
-
4
Ionic form
Na
+
5
Moisture content (%)
45-50
6
Quality Total Exchange Capacity (mmol/g)
≥4.5
7
Total exchange capacity (mmol/ml)
≥2.0
8
Defined Shear Rate (%)
≥90
9
Bulk Density (g/ml)
0.78-0.88
10
True Density (g/ml)
1.26-1.30
11
Particle Size Range (%)
0.315-1.25 mm≥90
12
Applicable PH
1-14

Comparison:
Bayer S100 Rohm & Haas IR-120

Purolite C100 Dow Dowex HCR--S(E)

Packing
1.

PE bag (25liters)

2. PE valve bag (25liters)

Contact
Tel:0086-351-3343082
fax:0086-351-3343281




Drinking water Ion Exchange Resin 001x7

Strong Acid Cation Exchange Resin
for Desalination, drinking water treatment
Food Grade Cation Exchange Resin
Food Grade Ion Exchange Resin


1.Resin for Food Grade can meet FDA standard of U.S.A.
2.Resin for Food Grade complies with Sanitary Supervision and Management Regulation for Drinking Water of Chinese health authorities and has been issued Food Hygiene Approval Permit.
3.Food Grade Ion Exchange Resin doesn’t contain substances which are harmful to human body and tainted.
4.It has been widely used in decolorization, demineralization, softening aspect in food, drinking water and some other industries.
5.Quality Inspection Staff Seeking Ever Greater Perfection: Each inspector had to go through rigorous technical training so as to foster and seeking ever greater perfection and in turn to strictly control product quality.
6.Inspection of raw materials: Rigorous inspection of raw materials is the foundation of product quality.

Applications:
Mainly used for drinking water softening and desalination, and antibiotic extracting, etc.

Specification
NO.
ITEM
SPEC
1
Type
Strongly acidic
2
Matrix
Polystyrene
3
Function group
-SO
3
-
4
Ionic form
Na
+
5
Moisture content (%)
45-55
6
Quality Total Exchange Capacity (mmol/g)
≥4.5
7
Total exchange capacity (mmol/ml)
≥1.9
8
Defined Shear Rate (%)
≥90
9
Bulk Density (g/ml)
0.75-0.85
10
True Density (g/ml)
1.25-1.30
11
Particle Size Range (%)
0.315-1.25 mm≥90
12
Applicable PH
1-14

Comparison:
Bayer S100LF Rohm & Haas SR1L Purolite C100E

Packing
1.

PE bag (25liters)

2. PE valve bag (25liters)

Contact
Tel:0086-351-3343081
fax:0086-351-3343281


Drinking water Ion Exchange Resin

Drinking water Ion Exchange Resin
Strongly acidic cation exchange resin
Used for drinking water softening and desalination
Food grade Ion Exchange Resin
1. Resin for Food Grade can meet FDA standard of U.S.A.
2. Resin for Food Grade complies with Sanitary Supervision and Management Regulation for Drinking Water of Chinese health authorities and has been issued Food Hygiene proval Permit.
3. Food Grade Ion Exchange Resin doesn’t contain substances which are harmful to human body and tainted.
4. It has been widely used in decolorization, demineralization, softening aspect in food, drinking water and some other industries.
5. Quality Inspection Staff Seeking Ever Greater Perfection: Each inspector had to go through rigorous technical training so as to foster and seeking ever greater perfection and in turn to strictly control product quality.
6. Inspection of raw materials: Rigorous inspection of raw materials is the foundation of product quality.
TC 007FG
Applications
:
Mainly used for drinking water softening and desalination, and antibiotic extracting etc.
Specification:
NO.
ITEM
SPEC
1
Type
Strongly acidic
2
Matrix
Polystyrene
3
Function group
-SO
3
-
4
Ionic form
Na
+
5
Moisture content (%)
45-55
6
Quality Total Exchange Capacity (mmol/g)
≥4.5
7
Total exchange capacity (mmol/ml)
≥1.9
8
Defined Shear Rate (%)
≥90
9
Bulk Density (g/ml)
0.75-0.85
10
True Density (g/ml)
1.25-1.30
11
Particle Size Range (%)

0.315-1.25 mm≥90

Comparison
:
Bayer: S100LF Rohm & Haas: SR1L
Packing:
1. PE bag (25 liters)
2. PE valve bag (25 liters)

Pictures:

Drinking water Strong Basic Anion Exchange Resin 201*4

Drinking water Strong Basic Anion Exchange Resin 201X4
CertifIed by FDA standard of U.S.A
Analog A400
Small order accepted
Drinking water strong basic Anion Ion Exchange Resin

Analog A400

1.
Food Grade Ion Exchange resin can meet FDA standard of U.S.A.
2
. Food Grade Ion Exchange resin complies with Sanitary Supervision and Management Regulation for Drinking Water of Chinese health authorities and has been issued Food Hygiene Approval Permit.
3.
Food Grade Ion Exchange Resin doesn’t contain substances which are harmful to human body and tainted.
4.
It has been widely used in decolorization, demineralization, softening aspect in food, drinking water and some other industries.
5.
Quality Inspection Staff Seeking Ever Greater Perfection: Each inspector had to go through rigorous technical training so as to foster and seeking ever greater perfection and in turn to strictly control product quality.
6.
Inspection of raw materials: Rigorous inspection of raw materials is the foundation of product quality.

Applications:
Used in color and salt removal in the sugar liquid.

Specification
NO.
ITEM
SPEC
1
Type
Strongly basic
2
Matrix
Polystyrene
3
Function group
-N
+
(CH
3
)
3
4
Ionic form
Cl
-
5
Moisture content (%)
50-60
6
Quality Total Exchange Capacity (mmol/g)
≥3.8
7
Total exchange capacity (mmol/ml)
≥1.1
8
Defined Shear Rate (%)
≥90
9
Bulk Density (g/ml)
0.66-0.71
10
True Density (g/ml)
1.06-1.11
11
Particle Size Range (%)
0.315-1.25 mm≥90
12
Applicable PH
1-14


Comparison:

Bayer M504/510 Rohm & Haas IRA402/420

Purolite A400 Dow Dowex SBR-P

Packing:
1.

PE bag (25liters)

2. PE valve bag (25liters)

Contact:
Tel:0086-351-3343081
fax:0086-351-3343281