Wednesday, August 31, 2011

Magic water retaining ge

1. Non-toxic environmentally safe, SAP
2.high water retention capacity and Rapidly
3.absorb fertilizers, slow release
Introduction
The most commonly available superabsorbent polymers are hard, dry, granular powders that look much like clean white sand or granular table sugar. When these polymer particles are placed in water, a slurry of water and the particles is formed. Gradually the superabsorbent polymer absorbs the water, turning into a soft, rubbery gel. On average, fluffed cellulose pulp fibers will absorb about 12 g of water per gram of dry fiber, whereas superabsorbent polymers will absorb up to 1,000 g of water per gram of polymer.


Maleic Acid Resin for Traffic Paint

Maleic Acid Resin for Traffic Paint
1.For white or yellow hot-melt traffic paint
2.Good adhesion, good compatibility
Rosin Modified Maleic Anhydriade Resin is the slight yellow transparent solid,which
is adducts of gum rosin and malic anhydride through the esterification by glycerol and
charge the heat and light stabilizer.

Specifications:
Items
HC100R
HC105R
HC110R
HC115R
HC125R
Color (Gardner Grade) Max
5
5
5
5
5
Softerning point
100 ± 3
105 ± 3
110 ± 3
115 ± 3
125 ± 3
Acid volue, mgKOH/g, ≤
20-30
20-30
20-30
20-30
20-30
Solubility in Benzene 1:1
Compatible, clear


Features:

1.It is soluble in aromatic,aliphatic, ester and ketone solvents.
2.It is special for making the traffic paint,which have good resistance to crushing,
resistance to crocking, abrasion resistance, appropriate levelling and fast dry.
It is also has good resistance to yellowing and ageing resistance.
3.Good adhesion,it is used as a binder especially for road making paints.
4. Good compatibility,free compatible with petroleum resin and EVA at free percentage.

Usage:
To make white or yellow hot-melt traffic paint.
Package:
Beads, or flake, kraft paper bag, 25kg net each bag.

Maleic Acid Resin

is adducts of gum rosin and maleic anhydride through the esterification by glycerol or pentaerythritol.

1. Properties and application:
Rosin Modified Maleic Anhydride Resin is the slight yellow transparent solid, which is adducts of gum rosin and maleic anhydride through the esterification by glycerol or pentaerythritol.
Soluble in coal tars, esters, turpentine oil; insoluble in alcoholic solvents; partially soluble in petroleum solvents, soluble well in plant oils. Which with the advantages of stabile color, resistant to yellowing, good heat resistant and adhesion.

2
. Specifications of Maleic Acid Resin
Type
Items Spec.
SMM-120
SMM-130
Solubilitywith benzene1:1
clear
clear
Color Fe-Co Scale
≤5
≤5
Acid Value,mgKOH/g max
30
30
Softening PointR&B,
125±2
130±2
3. Packing:
Beads or flake, craft paper bag or plastic intertexture bag, 25kgs net each bag.
Packing specified by customers.

Maleic Modified Rosin Resin (MR-422)

Maleic modified rosin resin (MR-422) is designed for nitrocellulose compatibility.

It is useful in formulating pale lacquers for wood finishing, lacquer sealers, and C type gravure printing inks that contain toluene.
Characteristics
l Nitrocellulose compatibility
l Compatible with a wide range of solvents and resins
l Improved flexibility in formulating
l Exceptional resin for use in toluene and isopropyl acetate blends

Typical Properties
Specifications
Acid Value (mg KOH/g)
<= 35
Softening Point (Ring & Ball),
125-135
Color, Gardner
<= 4

Suggested Applications
Mainly used in lacquer wood furniture sealer and sander coats, film forming resin for nitrocellulose based packaging-gravure inks.
Forms/Packaging
Flaked form
25kg paper-plastics compound sacks

Storage
Prolonged storage should be avoided due to the potential effect on performance

The information and recommendations set forth herein are presented in good faith and are believed to be correct and reliable. Lifeng Chemical Co., Ltd. makes no representation as to the completeness or accuracy thereof and supplies information upon the condition that the persons receiving it will make their own determination as to its suitability for their purpose prior to use.

Acrylic acid,AA 99.5% min

1.Acrylic Acid 99.5%min
2.Grade: industrial grade
3.CAS NO.141-32-2
4.Packing in 200kgs drum
5.Origin: Made in China
Acrylic acid

Product Name
Acrylic acid
Formula
C3H4O2
CAS
79-10-7
Grade/Type
99.5% Tech
HS Code
29161100
EINECS NO.
201-177-9
Package
200KG/barrel,bulk,polyethylene drums

Properties
Unit
Standard
Purity(Wt)
%
≥ 99.5
Water(Wt)
%
≤ 0.1
Inhibitor(MEHQ)ppm(Wt)
%

= 200±20
Color(APHA)
%

≤ 20
%


is offering all the products and services related to your chemical procurement.
> Because Quality is our priority, our specialist team is selecting our suppliers (products & services) through Quality Standard Operation procedures (ISO 9001:2008 certification) and we are constantly monitoring them.
> We have better prices thanks to our suppliers' network and our worldwide purchasing power.
> We have selected and monitored suppliers in Industrial, specialty, fine chemicals, food&feed additives, polymers & resins, pharmaceuticals...
>>>>>>>>
Ease and Secure your procurement, come and talk to us!
<<<<<<<< "

Maleic Modified Rosin Resin

It is the slight yellow transparent solid,mainly used in paint and coating industries.
Maleic Modified Rosin Resin is the slight yellow transparent solid, which is prepared by gum rosin and other raw material through unique formula and technical process. It is mainly used in paint and coating industries.

MR422 and MR424 are used in formulating pale lacquers for wood finishing, lacquer sealers, and C type gravure printing inks that contain toluene. Mainly used in lacquer wood furniture sealer and sander coats, film forming resin for nitrocellulose based packaging-gravure inks.
103, 105, 107 and 115 are Mainly used in ink industry and sizing agent in papermaking.

Characteristics
Good heat resistant and adhesion
Compatible with a wide range of solvents and resins
Improve hardness of paint films, high gloss
Improved flexibility in formulating

Specifications and Applications

Item Unit
Softening Point (Ring & Ball), ºC
Color, Gardner,#
Acid Value
(mg KOH/g)
Features
Applications
Test method
GB8146
GB/T 1722-1992
GB8146
MR422
125-135
≤4
≤35
Stable color, good heat resistant and adhesion
Paint, Ink
MR424
120-130
≤4
≤25
Good heat resistant and adhesion, Stable color
Paint, Ink, Adhesive
103
85
8
175
Good stability in water
Sizing Agent, Adhesive
105
90
8
185
Good stability in water
Sizing Agent, Adhesive
107
95
8
195
Good stability in water
Sizing Agent, Adhesive
115
108
8
220
High SP, good stability in water
Sizing Agent, Adhesive

Soluble in coal tars, esters, turpentine oil, plant oils


Forms & Packaging
Flake, 25kg paper-plastics compound sacks or 40kg plastic intertexture bag, other packaging available upon client's requirements.

Storage & Shelf life
It could be stored in cool and dry places.
Maximum shelf life is 12 months.

Maleic Resin for Traffic Paint

Maleic Resin for Traffic Paint
1.Good adhesion and compatibility
2.Resistance to crush and abrasion
3. Yellowing resistance
Maleic Resin for Traffic Paint
Rosin Modified Maleic Anhydriade Resin is the slight yellow transparent solid,which
is adducts of gum rosin and malic anhydride through the esterification by glycerol and
charge the heat and light stabilizer.

Specifications:
Items
HC100R
HC105R
HC110R
HC115R
HC125R
Color (Gardner Grade) Max
5
5
5
5
5
Softerning point
100 ± 3
105 ± 3
110 ± 3
115 ± 3
125 ± 3
Acid volue, mgKOH/g, ≤
20-30
20-30
20-30
20-30
20-30
Solubility in Benzene 1:1
Compatible, clear


Features:

1.It is soluble in aromatic,aliphatic, ester and ketone solvents.
2.It is special for making the traffic paint,which have good resistance to crushing,
resistance to crocking, abrasion resistance, appropriate levelling and fast dry.
It is also has good resistance to yellowing and ageing resistance.
3.Good adhesion,it is used as a binder especially for road making paints.
4. Good compatibility,free compatible with petroleum resin and EVA at free percentage.

Usage:
To make white or yellow hot-melt traffic paint.
Package:
Beads, or flake, kraft paper bag, 25kg net each bag.

Maleic Resin

Maleic Resin for Traffic Paint
1.Good adhesion and compatibility
2.Resistance to crush and abrasion
3. Yellowing resistance
Maleic Resin for Traffic Paint

Rosin Modified Maleic Anhydriade Resin is the slight yellow transparent solid,which
is adducts of gum rosin and malic anhydride through the esterification by glycerol and
charge the heat and light stabilizer.

Specifications
Items
HC100R
HC105R
HC110R
HC115R
HC125R
Color (Gardner Grade) Max
5
5
5
5
5
Softerning point
100 ± 3
105 ± 3
110 ± 3
115 ± 3
125 ± 3
Acid volue, mgKOH/g, ≤
20-30
20-30
20-30
20-30
20-30
Solubility in Benzene 1:1
Compatible, clear



Features

1.It is soluble in aromatic,aliphatic, ester and ketone solvents.
2.It is special for making the traffic paint,which have good resistance to crushing,
resistance to crocking, abrasion resistance, appropriate levelling and fast dry.
It is also has good resistance to yellowing and ageing resistance.
3.Good adhesion,it is used as a binder especially for road making paints.
4. Good compatibility,free compatible with petroleum resin and EVA at free percentage.

Usage
To make white or yellow hot-melt traffic paint.
Package
Beads, or flake, kraft paper bag, 25kg net each bag.

Maleic Rosin

Maleic rosin are modified resin of common natural rosin, are dissolved in esters
Maleic rosin are made from good quality rosin
Specifications
Maleic Rosin Mainly be used in shoes polish,papermaking,sizing agent,ink and other industry,and also futher make synthetic resin

Maleic Rosin

Maleic rosin are made from good quality rosin and maleic anhydride through addition reaction then with vacuum treatment packaging.
Maleic rosin are modified resin of common natural rosin, are dissolved in esters,alcohol and some oil flux,can disperse in water to milky, with higher softening point and acid value.Their sodium soap are strong sizing agent in papermaking industry,and also can make multiple acid synthetic resin and other chemical material.


Specifications:
Type
115
107

Appearance
Brown Yellow and transparent solid
Softening pointR&B ,
0
C,≥
108
90

Acid value(mgKOH/g), ≥
220
185

saponification mattermgKOH/g, ≥
275
195

Machinery impurit
Content %,≤
0.06
0.06



Uses: Mainly be used in papermaking,sizing agent,ink and other industry,and also futher make synthetic resin.


Packaging: net weight 225kgs each iron drum.

Storage: Stored in a cool storage, not with a total storage oxidants.

Manufacture High molecular Cationic Polyacrylamide

Cationic PAM :
1.water treatment chemicals
2.used in paper making industry
3.used in mining industry
4.white granule powd
Types and perforrmance index
Technology index
BY-A
BY-B
BY-C
BY-D
BY-E
BY-F
Appearance
White particle or power
Solid(%)
≥89
≥89
≥89
≥89
≥89
≥89
Lon degree (%)
10
20
30
40
50
60
Package and storage
The package is made with 25kg plastic lining woven bags or paper-plastics compound sacks or according to customers’ individualized demands.During storage and transportation, heat and humidity should be prevented specially and it should be borne in mind that the product of dry powder will absorb humidity and agglomeration…The number of stacking layers can’t be more than 20. The effective storage period is 2 years .
Application
Dehydrating silit
According to the featuresof the silit , corresponding brand of the product can be applied to dehydrating the silt effectively before it enters filter press .floc produced in dehydration is big so that it is not sticky to the filtration fabric.No free-running occurs during filter pressing; the dosage is small and the rate of dehydration is high and the humidity content is less than 80% .
Disposal of sewage and organic waste water
The porduct can appear electro-positivity in acid or alkalescence medium , which will have a good effect of clarification to have flocculation deposition to sewage with negatiove charge in the suspended particles, e.g. swege from alcohol plant , beer plant ,monosodium glutamate plat, plant of meat, beverage factory , textile mill, dying plant ,ect .The effect of positive ion polyacrylamide is several times or scores of times better than negative ion polyacrymide, non-ionic polyacrylamide or inorganic salt, because such sewage generally carries negative charge .
Flocculant for water treatmeant in waterworks
The product has advantages of small dosage, good effect ,low cost, ect. it can achieve better effect by combining with abio-flocculant .
Oil Field Chemical
Including clay anti-swelling agent, transfer agent for oilfiled acidification,etc .
Addictives ofr paper making
Positive ion PAM paper intensifier is type of water-solubility positive ion polymer containing carbamic acid and has the function of strengthening , retention, filtration which can improve the strength of paper effectiovely .In addition, the product is also an effectiove dispersant .

Manufacture supply high purity Cationic Polyacrylamide

cationic Polyacrylamide:
1.White particle Powder
2.Wastewater Treatment Chemical.
3.white powder or the transparent colloid


Anionic Polyacrylamide
Features:
1) Appearance: white granule
2) Molecular weight: 5 - 22 million minimum
3) Granule: 20 - 100 mesh
4) Solid content: 89% minimum
5) Hydrolyzing degree: 10 - 20%, 20 - 30% or 30 - 40%
6) Dissolving time: 2 hours maximum (10°C)
7) Insoluble: 0.5% maximum
8) Monomer free: 0.05% maximum
Molecular weight (million)
18-25
15-17
10-14
8-10
6-8
4-5
Solid content (%)
≥90
≥90
≥90
≥90
≥90
≥90
Hydrolysis degree (%)
20-30
15-30
15-30
10-30
8-15
8-10
Residual
monomer (%)
0.05-0.1
0.05-0.1
0.05-0.1
0.05-0.1
0.05-0.1
0.05-0.1
Effective pH value
7-14
7-14
7-14
7-14
7-14
7-14
Appearance
White powder/granule

Manufacturer of Anionic Cationic Polyacrylamide

1.Manufacturer of polyacrylamide
2.Appearance:White Dry Powder
3.Supply with high quality ,best price ,standard packing.
Detailed Product Description

Application:
Oil drilling mud agent materials and as other industries materials.
To be used in flocculating of clay and shale encountered in the drilling operation.
suitable for dyeing, paper making, food, construction, metallurgy, mineral processing, coal, oil, aquatic products processing and fermentation of organic colloids and other industries higher levels of wastewater treatment, etc.




SPECIFICATION – TDS/COA


POLYACRYLAMIDE (HPAM) 30

PHYSICAL PROPERTIES
Appearance

White Dry Powder
Molecular Weight ×106*
8
Ion Degree
30
Solids Content
90%
Insoluble Content (h)
2
PH
1-14
Application Range
Oil drilling mud agent materials and as other industries materials.
To be used in flocculating of clay and shale encountered in the drilling operation.
suitable for dyeing, paper making, food, construction, metallurgy, mineral processing, coal, oil, aquatic products processing and fermentation of organic colloids and other industries higher levels of wastewater treatment, etc.
Packing
Packaged in multi walled paper Sacks of 25 Kg and every 40 Sacks in1 blat.

The mentioned data of analysis just for reference, the actual result depends on physical material loaded.

Personal
P
recautions
:
Avoid breathing dust.
Wear respirator when airborne dust is present
Harmful by Inhalation
Danger of serious damage to health by prolonged exposure







Manufacturers Of AA/AMPS

ISO9001,ISO14000
Biggest AA/AMPS Manufacturer
Export to global market

Properties:
is the copolymer of acrylic acid and 2-acrylanmido-2-methylpropanesulfonic acid (AMPS). Due to including carboxylic group (scale inhibition and dispersion) and sulfonic acid group (strong polarity) in this copolymer, has high calcium tolerance and good scale inhibition for calcium phosphate, calcium carbonate and zinc scale. When built with organophosphines, the synergic effect is obvious. is suitable to be used in water quality of high pH and high alkaline, it is one of the ideal scale inhibitor and dispersant on high concentration index.

Specification:
items
index
Appearance
Colorless or light yellow viscous liquid
Solid content
40% min
Free monomer (as AA)
0.8% max
Density (20C)g/cm
3
1.15 min
pH(1% solution)
3.5-4.5
Viscosity mpa.s
90-200

Usage:
can be used as scale inhibitor and dispersant in open circulating cool water system, oilfield refill water system, metallurgy system and iron & steel plants to prevent sediment of ferric oxide. When built with organophosphorines and zinc salt, the suitable pH value is 7.0~9.5.
can also be used as dyeing auxiliaries for textile.

Package and Storage:
Normally In 250kg net Plastic Drum, IBC drum can also be used as required.

Master Batch

Antistatic, Effcient Flame-Retardant, Weatherproofing, Funcation and Pearlescent Color Master Batch

We have extensive experience in the manufacture of Masterbatch, including Antistatic Color Master Batch, Effcient Flame-Retardant Color Master Batch, Weatherproofing Color Master Batch, Funcation color master batch, Pearlescent Color Master Batch.

Our experience in the area of Black Masterbatch extends to over 10 years. We have experience of most applications and extensive experience in product types and formulations which are required by the industry.

Color Msterbatches
With a full range colors. We’re almost sure we have a match for the color you are looking for – not only for commodity polymers but for engineering plastics as well.
Besides standard colors, we can match a color according to your physical sample or even a Pantone shade card number. Our team of color technicians can practically match any color that you can dream of.

Medium-oil water-soluble self-drying alkyd resin

resin, water based alkyd resin,acrylic, self-drying
water-soluble resin
nautal

resin, water based alkyd resin
Features
*
Use aqueous thinner;Low VOC; Environmental friendly
*
Quick dry with driers
*
Ease of operation(scrub or spray)
*
Excellent leveling performance; Excellent gloss; High hardness
*
Long-term package stability
Applications
*
Contractor and DIY Finishes
*
Wood floor coatings
*
Wood protectants
*
Spar varnishes

Acrylic acid,hot sale AA 99.5%

1 acrylice acid
2 99.5%,99.8%
3 competitive price
4 large quantity can supply
5 good quality
Acrylic acid

Product Name
Acrylic acid
Formula
C3H4O2
CAS
79-10-7
Grade/Type
99.5% Tech
HS Code
29161100
EINECS NO.
201-177-9
Package
200KG/barrel,bulk,polyethylene drums

Properties
Unit
Standard
Purity(Wt)
%
≥ 99.5
Water(Wt)
%
≤ 0.1
Inhibitor(MEHQ)ppm(Wt)
%

= 200±20
Color(APHA)
%

≤ 20
%


is offering all the products and services related to your chemical procurement.
> Because Quality is our priority, our specialist team is selecting our suppliers (products & services) through Quality Standard Operation procedures (ISO 9001:2008 certification) and we are constantly monitoring them.
> We have better prices thanks to our suppliers' network and our worldwide purchasing power.
> We have selected and monitored suppliers in Industrial, specialty, fine chemicals, food&feed additives, polymers & resins, pharmaceuticals...
> Sunivo is responsible of all the supply chain, offering services like sourcing, logistics, financing, marketing...
> Moreover, Sunivo's website is providing free and easy instant quotations, product information, online order... Sunivo is a stress-free, cost efficient and solution provider to your chemical procurement.
>>>>>>>>
Ease and Secure your procurement, come and talk to us!
<<<<<<<< "

Melamine Formaldehyde Resin

CAS No.: 108-78-1
Other Names: cyanuramide
MF: C3N6H6
EINECS No.: 203-6 15-4
Place of Origin: China (Mainland)
CAS No.: 108-78-1
Other Names: cyanuramide
MF: C3N6H6
EINECS No.: 203-6 15-4
Place of Origin: China (Mainland)
Grade Standard: Industrial Grade, Reagent Grade
Purity: 99.8%
Appearance: white powder
Application: formaldehyde resin,decorative lam...
Brand Name: Golden Color
Melamine: Melamine

Packaging Detail: 25kg/craft bags 25kg/PP Woven bag
Delivery Detail 15 days


melamine
1)99.8% White fine powder

melamine
1)99.8% White fine powder
2)can offer all kinds of package and Pallets
3)SGS Inspection
4)25kg PP bags or FIBC bag

melamine
1)99.8% White fine powder
2)can offer all kinds of package and Pallets
3)SGS Inspection
4)25kg PP bags or FIBC bag


Items
Standard
Purity
99%min
Ash
0.05 max
Volatility
0.3% max
Color (hazen)
30 max
PH value
7.5-9.5
Appearance
white powder
Water
0.20 max



Melamine Moulding Compound for tableware

Melamine Moulding Compound
1. Good fluidity, appearance, strength, heat resistance
2. For Melamine dinnerware
2. ISO9001:2008
Melamine moulding compound (MMC):

We specialized in thermosetting plastic for
25 years
.

MF1P-XXX, Powder form, compression grade.
MF1G-XXX, Granular form, compression grade.
MF1I-XXX, Granular form, injection grade.

Product ingredient
:
This series of products are aminoplast based on melamine formaldehyde resin and takes fibre, mineral as the filling, together with both lubricant,hardener and pigment,etc.

Usage:

MF1P-xxx is special grade for making
melamine dinnerware / tableware
, with good fluid, appearance and high temperature of hot distortion.

It can be used in
dish-washing machine
, But it can not be used in microwave oven.

3.
Melamine resin content:
A1: 30% MMC and 70% UMC
A3: 50% MMC and 50% UMC
A5: 100% MMC

4.
Color available:
red, yellow, green, blue, violet, black, white, cream, ivory, brown, orange, etc.

Following
13454-92
Chinese National Standard
Packaging: Plastic knitting bag with wet proof inner plastic. 25kg/bag
Storage: Kept in airy, dry and cool room.
Storage period: one year from the manufacturing date.





Melamine modified phenolic resin

High nitrogen content Flame retardant
High glass transition temperature
Good chemical resistance Heat resistance

Melamine Modified Phenolic Resin
Product
Grade
Viscosity
(cps , 25
o
C)
Non-Volatiles
(%)
Appearance
Recommended
Solvents
Features

Application
Melamine modified phenolic resin


PX-PN002
800~1500
60±2
Reddish brown liquid
MEK
PMA
­ Nitrogen content: 14%
­ Flame retardant
­ Good heat resistance
­ Good chemical resistance
­ Epoxy curing agent
­ Lamination, Casting
­ Composite
­ Coatings formulation
­ Impregnation
PX-PN005
800~1500
60±2
Reddish brown liquid
MEK
PMA
­ High nitrogen content:
­ Flame retardant
­ High glass transition temperature
­ Good chemical resistance
­ Heat resistance
­ Epoxy curing agent
­ Lamination, Casting
­ Composite
­ Coatings formulation
­ Impregnation

Methacrylic Acid(MAA) 79-41-4 99%

Methacrylic Acid(MAA) ISO 9001
1.polymethyl methacrylate,resin,coating,acrylate polymers
2.content:99%Min
3.capacity:10000t/y
Methacrylic Acid(MAA) Specification
CAS
79-41-4
Molecular Formula
C
4
H
6
O
2
Molecular Weight
86.09
Melting point
16°C
Boiling point
163°C
Refractive index
1.4295-1.4315
Flash point
76°C
Water solubility
9.7 g/100 mL (20 ºC)
Appearance
colorless transparent liquid
Content
99%Min
Use
important industrial raw material and synthetic organic intermediates
Packing
200kgs/drum; according to user's requirements

Methyl Cellulose

1, 20 years experience in cellulose ether area
2, EU Standard lab
3, Experts from USA for technical support
MC from the manufacturer with 20 years experience, is used as a crucial additive for building materials ,meets various demand
MC ,GinShiCelare types of cellulosederivatives known as cellulose ethers,specifically Methyl Cellulose(MC), Hydroxy Propyl Methyl Cellulose(HPMC), Hydroxyethyl Cellulose(HEC), and Hydroxy Ethyl MethylCellulose (HEMC) made by steps below:
Soak the pure cellulose (purified cotton / wood pulp) in an aqueous caustic soda and organic solvent mix.
React the resultant alkaline cellulose with etherifying agents, such as alkyl halides or alkylene oxides,
Recover the solvents and wash the product,
Dry and mill the ethereified product .

Methyl Hydrogen Silicone Fluid

it can crosslink to form water repellant .
Under the effect of metal salt activator at low temperature it can crosslink to form water repellant film on the surface of various matters, it can be applied as water repellant for various materials as fabric, glass, ceramic, paper sheet, leather, metal, cement, marble etc. especially for fabric water proof. Use methyl hydrogen silicone fluid latex together with methyl hydroxide silicone fluid latex may resist water and remain Air’s permeability of the fabric and enhance splitting tensile strength, friction strength and antifouling property and improve the feel and stitching property of the fabric. Besides, it also can be applied in antiadhesion isolating agent and crosslinking agent for paper manufacture.

Methyl Hydrogen Silicone Oil

Methyl Hydrogen Silicone Oil
1,High Containing hydrogen silicone oil
2,qualified quality
3,Plasterboard waterproofer agent
Methyl Hydrogen Silicone Oil
polymethylhydrosilxane /MH silicone oil


1. Chemical Name: Methyl Hydrogen Silicone Fluid

2. Overseas corresponding trademark: DC-1107, KF-99, TSF-484, RHODORSIL H68


3. Specifications:

CAS No.
63148-57-2
Appearance
Colorless, tasteless and transparent liquid
Viscosity(25
o
C)
20-30 mm
2
/s
Hydrogen Content
1.58~1.60%
Volatile Content: (150°,3H)
≤3%
Flash Point:
≥160°C
PH
6~7

4. Properties & Applications:

This product is widely used in the following areas:
a.
Methyl Hydrogen Silicone Oil
Widely used in the finishing of all kinds of fibers such as cotton, hemp, silk, nylon, polyester. Or the hydrophobing and moisture-proof treatment of powders, glass, ceramic, leather, paper, metal, cement and marble.
b.
Methyl Hydrogen Silicone Oil
Used as the cross linker for addition type silicone rubber series.
c.
Methyl Hydrogen Silicone Oil
Used as the basic material and a fundamental intermediate to synthesize some modified silicone oil including polyether modified silicone oil and alkyl based modified silicone oil.
d.
Methyl Hydrogen Silicone Oil
Used as hydrophobic agent, lubricant and antisticking agent of oily based foundation of cosmetics

5. Storage and Transportation:
Methyl Hydrogen Silicone Oil
Storage: Store in dry, clean and airtight container. (200L per plastic barrel/ iron barrel or 1ton IBC) Do not touch acid, alkali and other impurities. Keep away from fire, sunlight and rain during storage and transportation.

Methyl Hydrogen Silicone Oil
Shelf time: 6 months. Beyond the time, it still can be used after tested and qualified.
Methyl Hydrogen Silicone Oil
Transportation: As non-hazardous chemicals




Methyl Hydrogen Silicone competitive price

methyl hydrogen silicone priceApproximate general chemical structure(CH3)3 SiO[SiH(CH3)O]x Si(CH3)3 with x is approx. 45 - 90.
Storage
Poly (methyl hydrosiloxane) has a shelf life of at least12 months when stored at 25 °C in the tightly closed original container. The 'Best use before end' date of each batch appears on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance Reasons.
Safety properties
Thermal stability
On heating for a short time in the absence of moisture,decomposition only occurs above 300 °C. In the presence of moisture, decomposition occurs at much lower temperatures together with the release of hydrogen, a viscosity increase and gelation, especially with thin films.
In the presence of certain catalysts H-siloxane may depolymerise with formation of volatile hydrogencontaining cyclic siloxanes.
Solubility, reactivity and hazards
Can be mixed with many organic solvents of low or average polarity. Can react with water, alcohols and proton active reagents of similar strength in the presence of suitable catalysts (acids, amines, metals,metallic salts) with hydrogen being released.
Particularly strong reactions can take place if only traces of alkalinematerial are present in a homogeneous mixture. Direct contact of H-siloxane with alkalis must be avoided, as well as the influence of strong oxidizing agents.
Ignition temperature
In our experience, the self-ignition temperature of H-siloxane is above 240 °C in the absence of reactive materials. Contact with porous or fibrous surfaces, eg, asbestos or asbestos substitutes, reduces the ignition temperature considerably. Foamy, resinous reaction products resulting from partial decomposition can also reduce the ignition temperature.
Safety precautions
In the event that H-siloxane splashes onto or is soaked up by the insulating material, the insulating material must be changed immediately. Please see our safety data sheet.
Product data
Appearance
colourless, clearliquid; mild odour
Volatility (5 g substance, 1 hour at 150 °C, cylindrical crucible, 30 mm diameter, 40 mm high)
less than 1.5% residue remains liquid
Density at 25 °C
approx. 1
Refractive index at 25 °C
approx. 1.39
Viscosity at 25 °C
approx. 15-25[mm²/s]
Hydrolysable chlorine (as HCI)
max. 5 [mg/kg]
Hydrogen content (released by alkali)
1.55-1.6%
Silicone content
99.5%
These figures are intended as a guide and should not be used in preparing specifications.
Safety information
Detailed safety information is contained in each material data safety sheet, which can be obtained from our sales offices

Methyl Methacrylate (MMA) 80-62-6 99.8%

Methyl Methacrylate
1.polymethyl methacrylate,resin,coating,acrylate polymers
2.content:99.8%Min
3.capacity:10000tons/year
Methyl Methacrylate Specification
CAS
80-62-6
Molecular Formula
C
5
H
8
O
2
Molecular Weight
100.12
Melting point
-48 ºC
Boiling point
100°C
Refractive index
1.413-1.415
Flash point
8°C
Water solubility
15.9 g/L (20 ºC)
Appearance
colorless transparent liquid
Content
99.8%Min
Use
The principal application, consuming approximately 80% of the MMA, is the manufacture of polymethyl methacrylate acrylic plastics (PMMA). Methyl methacrylate is also used for the production of the co-polymer methyl methacrylate-butadiene-styrene (MBS), used as a modifier for PVC.
Packing
200kgs/drum; according to user's requirements


Methyl Silicone Fluid

It isused in insulated lubrication, quakeproof, oil proof, dust proof, dielectric liquid and heat carrier etc.
Methyl silicone fluid can be used for a long period under the temperature -50°C~200°C for it is non-toxic , tasteless with physiological inertia and fine chemical stability, electro insulation, antiweatherability, hydrophobic property and high capacity of shearing resistance. It is widely used in insulated lubrication, quakeproof, oil proof, dust proof, dielectric liquid and heat carrier. And it can also be applied in antifoam, mold release agent, oil paint and additives for chemical products of daily use.

(WW Grade) Gum Rosin

Gum Rosin Mainly be used as the raw material of adhesives, paints, oil paints, rubber,
Gum Rosin
Product uses: Mainly be used as the raw material of adhesives, paints, oil paints, rubber,
soaps ,glue, ink , chewing gum and other chemical industrie



Item
Product Index Type
SYR-X
SYR-WW
SYR-WG
SYR-N
1.
Apperance
Transparent
2.
Color
Correspond to the Glass Standard Color of Rosin color
Slightly yellow
Pale yellow
yellow
deep yellow
3.
Softening Point(R&B), ≥
≥76
≥75
4.
Acid Value, mgKOH/g, ≥
≥166
≥165
5.
Alcohol insoluble Substance,% max
≤0.03
≤0.03
6.
Unsaponifiable matter,% max
≤5
≤5
7.
Ash Content, %, max
≤0.02
≤0.03






Acrylic acid,hot sale AA

1 acrylice resin
2 the material for road marking paint
3 competitive price
4 large quantity can supply
5 good quality
Acrylic acid

Product Name
Acrylic acid
Formula
C3H4O2
CAS
79-10-7
Grade/Type
99.5% Tech
HS Code
29161100
EINECS NO.
201-177-9
Package
200KG/barrel,bulk,polyethylene drums

Properties
Unit
Standard
Purity(Wt)
%
≥ 99.5
Water(Wt)
%
≤ 0.1
Inhibitor(MEHQ)ppm(Wt)
%

= 200±20
Color(APHA)
%

≤ 20
%


is offering all the products and services related to your chemical procurement.
> Because Quality is our priority, our specialist team is selecting our suppliers (products & services) through Quality Standard Operation procedures (ISO 9001:2008 certification) and we are constantly monitoring them.
> We have better prices thanks to our suppliers' network and our worldwide purchasing power.
> We have selected and monitored suppliers in Industrial, specialty, fine chemicals, food&feed additives, polymers & resins, pharmaceuticals...
> Sunivo is responsible of all the supply chain, offering services like sourcing, logistics, financing, marketing...
> Moreover, Sunivo's website is providing free and easy instant quotations, product information, online order... Sunivo is a stress-free, cost efficient and solution provider to your chemical procurement.
>>>>>>>>
Ease and Secure your procurement, come and talk to us!
<<<<<<<< "

Methyl Silicone Resin

Good heat resistance, barrier property, voltage resistance and solubility. Used as auxiliary for mold release agent etc..
Main performance, characteristics and use
Good heat resistance, barrier property, voltage resistance and solubility. Used as auxiliary for mold release agent etc..
Note
MQ=11

Methyl cyclopentadiene dimmer

MCPD is rectified from C9 fraction, a by-product of naphtha cracking.
PHYSICAL CHARACTERISTICS:
Molecular Formula: C12H16
Molecular Weight: 160.26
Specific Gravity, 20/20 oC 0.9410
Boiling Point, oC 200
Melting Point, oC -51
Flash Point, oC 26

PRODUCT SPECIFICATIONS:
Appearance transparent liquid without mechanical impurities
Mass fraction of MCPD+MCPD Dimer, % ≥ 93
Mass fraction of MCPD+CPD, %≤4
Mass fraction of MCPD, % ≤1
Mass fraction of Moisture, %≤0.03

Tuesday, August 30, 2011

Methyl hexahydrophthalic anhydride MHHPA

high purity, light color liquid, low viscosity, low volatility, low toxicity, low heating loss, stable performances
3,4-Methyl hexahydrophthalic anhydride
Abb: MHHPA
CAS RN: 25550-51-0
Molecular Formula: C
9
H
12
O
3
Molecular Weight: 168.19
Specific Gravity: 1.162
Soluble in benzene and propanone, etc., with hydroscopic property.
Quality index:
Appearance
colorless transparent liquid
Color(Pt-Co)
<5#
Iodine Value
<1%
Free acid
<0.5%
Acid value (mgKOH/g)
>645
. Hexahydro-4-methylphthalic anhydride
Abb: 4-MHHPA
CAS RN: 19438-60-9
Molecular Formula: C
9
H
12
O
3
Molecular Weight: 168.19
Specific Gravity: 1.162
Structural Formula:
Soluble in benzene and propanone, etc., with hydroscopic property.
Quality index:
Appearance
Colorless clear liquid
Content
≥98%
Features:
Methyl hexahydrophthalic anhydride is produced from methyl tetrahydrophthalic anhydride by catalytic hydrogenation. It is a high-performance product among acid anhydride-type solidifying agent, not only has the typical performances as methyl tetrahydrophthalic anhydride: high purity, light color liquid, low viscosity, low volatility, low toxicity, low heating loss, stable performances, long use life, low freezing point, and can be stored for a long time under room temperature; but also has more excellent performances than that of methyl tetrahydrophthalic anhydride: colorless, transparent, basically unchange color after being added accelerant and epoxyl solidified substance appears white; good resistance to heat, especially under the temperature lower than 150°C, epoxyl solidified substance are of excellent mechanical and electric properties, excellent weatherability, not be affected by light and heat, good moisture resistance, high reaction activity, fast solidifying speed and short gelation time.
Uses:
1.as solidifying agent for epoxy resins: MHHPA is heating-solidification type acid anhydride solidifying agent, mainly used in electrical and electronic field, with low melting point, the compounding matter with alicyclic epoxy resin is of low viscosity, long use life, excellent heat resistance and high-temperature electric properties, can be used in dipping of coil of electric apparatus, casting of electric parts and sealing of semiconductor.
2.as adhesive: the alicyclic epoxy adhesive made from MHHPA has similar refractive index as optical glass, low internal stress after solidifying, high adhesion strength, color unchangeable, resistance to aging, applicable for cohering large-area optical parts.
3.as insecticide, plasticizer and antirust, etc.
Storage, Packing & Transportation:
25kg plastic drum or 220kg metal pail,Avoid moisture, fire and water. Kept in dry and ventilating place.

Methyl hydro-silicone oil

Methyl hydro-silicone oil
1.CAS NO.:63148-57-2
2.High hydrogen content 1.50%-1.60%
3.ISO9001,ISO14001
4.Purity:100%
Methyl hydro-silicone oil specification

Structural Formula:
(CH
3
)
3
SIO[(CH
3
)(H)SIO]
n
SI(CH
3
)
3

CAS NO
63148-57-2
Apperance & Property
Colorless transparent liquid
Hydrogen Content (%)
1.58-1.60
Viscosity (25°C, mm 2/s)
20.00-30.00
Flash Point°C
≥160°C
Volatile Component%
≤3.00
Packing & Transportation
200L per plastic barrel/ iron barrel 1ton IBC stored in
a cool, ventilated warehouses.Away from fire and hot
sources. Require sealed packing. And the temperature
of warehouse should not be more than 30°C.
Prevent from direct sunlight.
Application:
Widely used as water proofing agent,anti-blocking agent
and anticorrosive agent of textile, extinguishing agent,
metal, leather, wood, glass, cement, ceramics and
marble etc..
Properties & Applications
:
The product is nontoxic and insipid. As there are fair quantity of relatively active Si-H bonds in the molecule, under the action of catalysts it can react with chemicals containing active groups such as double bonds or hydroxyl groups. Due to two unique properties of methyl hydrogen silicone fluid including weatherability and hydrophobic characteristics, this product can be converted into film and used to produce a resilient waterproof coating on various materials by using metal salt catalyst at low temperature. Thus, it equips with outstanding water repellent property which prevents damage due to moisture, as well as mildew and rust development. Besides, its very high vapor permeability allows the material to breathe and let water vapor escape to the outside without causing damage.
This product is widely used in the following areas:
1. Widely used in the finishing of all kinds of fibers such as cotton, hemp, silk, nylon, polyester. Or the hydrophobing and moisture-proof treatment of powders, glass, ceramic, leather, paper, metal, cement and marble.
2. Used as the cross linker for addition type silicone rubber series.
3. Used as the basic material and a fundamental intermediate to synthesize some modified silicone oil including polyether modified silicone oil and alkyl based modified silicone oil.
4. Used as hydrophobic agent, lubricant and antisticking agent of oily based foundation of cosmetics
6. Storage and Transportation:
Storage: Store in dry, clean and airtight container. (200L per plastic barrel/ iron barrel or 1ton IBC) Do not touch acid, alkali and other impurities. Keep away from fire, sunlight and rain during storage and transportation.
Shelf time: 6 months. Beyond the time, it still can be used after tested and qualified.
Transportation: As non-hazardous chemicals

Methyl hydro-silicone oil

Methyl hydro-silicone oil
similar to DC 1107 fluid
water repellent treatment of plaster used to produce tiles and board
Methyl hydro-silicone oil
Specifications
:
CAS No.
Appearance
Colorless, tasteless and transparent liquid
Viscosity(25
o
C)
20-30 mm
2
/s
Hydrogen Content
1.58~1.60%
Volatile Content: (150°,3H)
≤3%
Flash Point:
≥160°C
PH
6~7
Packing
:200L per plastic barrel/ iron barrel or 1ton IBC
Overseas corresponding trademark
: DC-1107, KF-99, TSF-484

Methyl hydrogen silicone oil

methyl silicone oil
1,Hydrogen Silicone oil
2,qualified quality
3,competitive price
4,perfect technology service
methyl silicone oil

.
Specifications:
CAS No.

Appearance
Colorless, tasteless and transparent liquid
Viscosity(25
o
C)
20-30 mm
2
/s
Hydrogen Content
1.58~1.60%
Volatile Content: (150°,3H)
≤3%
Flash Point:
≥160°C
PH
6~7

Packing
:200L per plastic barrel/ iron barrel or 1ton IBC
Overseas corresponding trademark
: DC-1107, KF-99, TSF-484

Methyl hydrogen polysiloxane

Methyl hydrogen polysiloxane/MH20 Silicone oil
2,qualified quality
3,competitive price
4,perfect technology service
Methyl hydrogen polysiloxane/MH20 Silicone oil

1. Synonyms:
Methyl hydrogen silicone oil
Methyl hydrogen polysiloxane
2. Structure:

3. Properties & Applications:
The product is nontoxic and insipid. As there are fair quantity of relatively active Si-H bonds in the molecule, under the action of catalysts it can react with chemicals containing active groups such as double bonds or hydroxyl groups. The product is mainly used as the basic material for the production of foam leveling agent or polyether modified silicone oil such as water soluble silicone oil. It can also be used as the waterproofing agent or softener for natural or synthetic fiber products, silk and leather. There is the choice on different hydrogen content and viscosity. Good water repellency. Suitable for powder treatment such as glass, metals, textile and powder materials.
4. Specifications:
Appearance
Colorless or light-yellow transparent liquid
Viscosity(25
o
C
)
20~30 mm
2
/s
Hydrogen Content
1.6%
PH
6~7
5. Storage and Transportation:
Storage: Store in dry, clean and airtight container. Do not touch acid, alkali and other impurities. Keep away from fire, sunlight and rain during storage and transportation.
Shelf time: 6 months. Beyond the time, it still can be used after tested and qualified.
Transportation: As non-hazardous chemicals
.

Methyl hydrogen silicone oil (high hydrogen silicone oil)

High quality. Methyl silicone oil with high hydrogen and low hydrogen (crossing linking agent).

Product Name: High Hydrogen Silicone Oil RH-8202
Main Composition Polymethylhydrosiloxane
Basic Character
Appearance: Colourless transparent liquid
Viscosity((25°C, mm2/s): 10-50
Density(25°C, g/cm3): 0.995-1.015
Refractive index(25°C): 1.390-1.410
Hydrogen high volume(%, m/m): ≥1.55
Hydrogen low volume(%, m/m): 0.1-1.2
Specialty: reactive silicone oil
Usage
1) In the operation of metal salt catalyst, it can be crosslinked film at the low temperature. The waterproof membrane formed on the surface of various materials can be used as waterproof agent of various materials such as fabric, glass, ceramics, paper, leather, metal, cement, marble, especially the waterproof of the fabric.
2) Hydrogen Methyl Silicone Oil emulsion used together with Hydroxy Methyl Silicone Oil emulsion can be waterproof, maintain the airpermeability, increase the tear strength, friction strength and anti-pollution of the fabric, and improve the handle feeling and suture performance of the fabric.
3) Used as anti-stick release agent and cross-linking agent of the paper.
4) It can polymerize with D4 into Low Hydrogen-containing Silicone Oil. It can ingraft various functional groups through addition reaction.
Safety Data
1) Danger character: it is flammable under fire, or high temperature.
2) Burning(decomposing) outcome: CO, CO2, silicon dioxide
3) Taboos: alkali, strong acid, strong oxidants
4) Fire fighting methods: carbon dioxide, foam, dry powder, water film-forming foam.
Attentions
The latex is easily affected by strong acid, alkali, strong electrolyte, causing the change of the quality. Keep far away from these substances. Store in the normal temperature

Methyl potassium silicate

Methyl potassium silicate
Content % : 40.0
Density 1.1
combustible nonflammable
Company
Name
Jiangxi Hongshun Chemical Co.,Ltd
Product Name
Methyl potassium silicate
Product Standard
Countrys stand


HS CODE
28391900
Technological Indices
1.Appearance Colorless transparent liquid.
2.Content % ≥40.0
3.Silicone content : % 18
4. Density 1.1
5.PH 13
6.combustible nonflammable

Properties
and Uses
When Methyl trichlorosilane mixed for cement motar, It will be appear some hydrophobic substances on the surface of the construction,that makes the construction have excellent and lasting waterproofing properties with no color changes, avirulent, harmless etc. characteristics
This product is suitable for Water-proof treatment which on the exterior wall and interior wall. It also can be used in cement, marble, plasterboard’s waterproof processing.
Packing, Storage and Transportation

200/Drum (200L iron drum); Storage at ventilate and dry place and prevention from water, heat and fire;
Transportation: It should be packed in 200L iron bucket(net weight 200kg/bucket) and be stored in a shady cool and ventilated storehouse. It should be kept away from kindling, temperature in the storehouse above 30°C is not suitable, Avoid direct sunlight.Air proof package is required without contact with air
Contact
Information
Name: Nikky (Foreign Trade Department)
Add:Hope street No.1,Yongxiu spark Industrial area,Jiujiang city,Jiangxi Province
P.C: 330000
Tel: 86-791-8215402
Fax: 86-791-8215402
Mobile :13437085850

Methyl silicic acid sodium

1.Appearance Colorless transparent liquid.
2.Content % 30.0
3.Silicone conten 18
4.PH 12~13
Company
Name
Jiangxi Hongshun Chemical Co.,Ltd
Product Name
Methyl silicic acid sodium
Product Standard
Countrys stand


Molecular Formula
CH5SiO3Na
Technological Indices
1.Appearance Colorless transparent liquid.
2.Content % ≥30.0
3.Silicone content : % 18
4. Density 1.16~1.2
5.PH 12~13
6.combustible nonflammable

Properties
and Uses
When Methyl trichlorosilane mixed for cement motar, It will be appear some hydrophobic substances on the surface of the construction,that makes the construction have excellent and lasting waterproofing properties with no color changes, avirulent, harmless etc. characteristics
This product is suitable for Water-proof treatment which on the exterior wall and interior wall. It also can be used in cement, marble, plasterboard’s waterproof processing.
Packing, Storage and Transportation

200/Drum (200L iron drum); Storage at ventilate and dry place and prevention from water, heat and fire;
Transportation: It should be packed in 200L iron bucket(net weight 200kg/bucket) and be stored in a shady cool and ventilated storehouse. It should be kept away from kindling, temperature in the storehouse above 30°C is not suitable, Avoid direct sunlight.Air proof package is required without contact with air
Contact
Information
Name: Nikky (Foreign Trade Department)
Add:Hope street No.1,Yongxiu spark Industrial area,Jiujiang city,Jiangxi Province
P.C: 330000
Tel: 86-791-8215402
Fax: 86-791-8215402
Mobile :13437085850

Acrylic impact modifier,type HL-755

1.Excellent impact strength
2.Excellent weather-resistance
3. low glass temperature
4. perfect gloss
5. easy to be fused
Outline of acrylic impact modifier(AIM),type: HL-755


HELI
TM
HL-755 developed by our R&D Center is acrylic impact modifier with a core-shell structure.
Its basic function is to improve the impact-strength of PVC products to meet the requirement of engineering plastics as well as increase the heat and light stability of PVC products.
Comparing with CPE,the glass temperature of AIM HL-755 is much lower than that of CPE,so the low temperature impact performance of PVC products modified by HL-755 is evidently improved than that filled with CPE.
products advantages:
1.Excellent impact strength under low-temperature conditions
2. Excellent long-term weather-resistance and color-retention
3. Ensuring the stability of size of the finished products
4. Less dosage,higher efficiency and reducing the out of grade products
5. excellent surface-gloss
application field:
as PVC impact modifier,HL-755 is mainly used to produce PVC opaque products,like PVC profile,PVC pipe,PVC pipe fitting and PVC sheet etc.
recommendation usage:
4-6phr per 100phr PVC resin.
packing:
20kg or 25kg/bag PP Valve bag with PE liner.
Remarks
:HL-755 is equivalent to KM-355 from Rohm&Haas.

Methyl tetrahydrophthalic anhydride MTHPA

high purity and light , Color
low viscosity
Stable property
low volatility
good solubility
Methyl tetrahydrophthalic anhydride
Abb.: MTHPA
CAS No: 19438-64-3
Molecular Formula: C
9
H
10
O
3
Molecular Weight: 166.17
Type:
following your demand, we can offer you 3-4 of Methyl tetrahydrophthalic anhydride.
Features:
1. high purity and light , Color
2. low viscosity
3. Stable property
4. low volatility
5. good solubility
Uses:
used in curing agent , solvent-free paint, laminated board and epoxy adhesive. It is widely used in the immerse, casting and winding of motor, dry type transformer, high tension switch, mutual inductor, line output transformer, capacitance, capacitance resistance and IC.
Storage, Packing & Transportation
25kg plastic drum or 220kg metal pail. Avoid moisture, fire and water. Kept in dry and ventilating place.

Methyl transparent resin -SAR-2

Highly crosslinked methylsiloxane has superior electric property
Methyl transparent resin -SAR-2 Methyl transparent resin -SAR-2 is a kind of highly crosslinked methylsiloxane. Through organoalkoxysilane, it undertakes cohydrolysis, polycondensation and forms prepolymer under exist of neutral accelerant. Then under exist of catalyst, it crosslinks infusible thermosetting plastic film with regular network structure under high or low temperature. Features: Film formation property of methyl transparent resin has advantages of insulated, hydrophobe, heat resisting, cold resisting, high hardness, good transparency, high degree of cross linking, excellent electric property, etc. Applications: Surface of thermosetting plastics, anti-flickering painting and coating of oscillight anode caps in electronic industry, heat resisting, insulated, flame-resistant and moistureproof painting, embedding material of electrical resistors, protective coating of transparent materials and metalware such as organic glass, makrolon, etc. Technical data: Appearance: Colorless and transparent liquid Solid content: 28%-30%

Methylated Amino Resin - Partially Methylated Melamine Resin

MM-825 is a partially methylated partially methylolated melamine resinwith a high imino (-NH) functionality.
MM-825 is a partially methylated partially methylolated melamine resinwith a high imino (-NH) functionality. It shows high reactivity to thecoating resins which contain OH, -COOH, and CONH
2
functional groups. MM-825 can harden rapidly at moderate curingtemperature without catalyst addition or at relatively low temperatureunder acid catalysis. The cured
coatings are of good gloss, chemical resistance, stability, and hardness. MM-825 amino resin is a very effective amino
crosslink agent for PCM, automobile and stoving enamels.

Physical Property

MM-825 Highly Methylated
Melamine-Formaldehyde Resin



Solid Content (%)

76±2



Viscosity (G..H/20)

W~Z1



Acid Value

<1



Solvent

Isobutanol



Catalyst

No

Methylated Amino Resins

Methylated Amino Resins

PRODUCT
Color (Pt-Co)
Appearance
Solid Content %
Viscositympa.s/25
M/F/Me
Main Usage
SM5717
≤50
Water white or light yellow transparent liquid
80±2
2000-6600
1/4.0/2.9
Coil coating, industrial paint
SM5747
≤50
Water white or light yellow transparent liquid
≥97
3000-10000
1/5.7/4.9
Coil coating, automotive paint
SM5780
≤70
Transparent Liquid
80±2
2500-10000
/
Can coating
SM5386
≤50
Transparent Liquid
60±2
30-50Tu-Cup4,S/25
1/4.0/2.9
Coil coating, industrial paint
SM5847
≤50
Transparent Liquid
≥98
3000-6000
1/5.7/4.9
Coil coating, industrial paint
SM5847L
≤30
Water white or light yellow transparent liquid
≥98
2400-5000
1/5.7/4.9
Coil coating, automotive paint, low formaldehyde
SM5817
≤50
Transparent Liquid
80±2
4500-9000
1/4.0/2.9
Coil coating, industrial paint
SM5823
≤30
Water white or light yellow transparent liquid
70±2
1000-3000
1/3.8/2.8
Colored zinc plated steel paintindustrial quick-drying baking paint metal coiling paintindustrial baking paint and water paint

Methylhydrogensiloxane polymer

Methylhydrogensiloxane polymer
1.CAS NO.:63148-57-2
2.High hydrogen content 1.50%-1.60%
3.ISO9001,ISO14001
4.Purity:100%
Methylhydrogensiloxane polymer /DC1107

.
CAS NO
63148-57-2
Apperance & Property
Colorless transparent liquid
Hydrogen Content (%)
1.58-1.60
Viscosity (25°C, mm 2/s)
20.00-30.00
Flash Point°C
≥160°C
Volatile Component%
≤3.00
Packing & Transportation
200L per plastic barrel/ iron barrel 1ton IBC stored in
a cool, ventilated warehouses.Away from fire and hot
sources. Require sealed packing. And the temperature
of warehouse should not be more than 30°C.
Prevent from direct sunlight.
Application:
Widely used as water proofing agent,anti-blocking agent
and anticorrosive agent of textile, extinguishing agent,
metal, leather, wood, glass, cement, ceramics and
marble etc..
Overseas corresponding trademark
: DC-1107, KF-99, TSF-484


Methylvinylpolysiloxane

It can be used in the manufacture of temperature resistant,damp proof insulation materials in the industry etc...
This product is undissolvable in water, and dissolvable in toluene. Its products have little distortion after compresses with fine characteristics of saturation vapor resistance. It can be used in the manufacture of temperature resistant, air proof materials and damp proof insulation materials in the industry of aviation, electron, mechanism and chemistry etc. In the industry of medicine and sanitation, as a raw material of milling silicon latex, it can be used in the production of artificial apparatus and medical pipes for its physiological inertia.

Middle East YAHO- Polyacrylamide

CAS: 9003-05-8
1)water treatment
2)as the reinforcing in papermaking industry
3)stabilize colloid
The product is high-efficient high molecular compound.The solid is white powder.
Nonionic Polyacrylamide series

The nonionic polyacrylamide produced by our factory is homopolymerized from acrylamide.The product has high purity,good soluble capability and high molecular weight.In 2002,the product passed authentication of ISO9001 Qulity System and the product type is PAM-NSG.
Type
Molecular Weight
×10
6
Lon content
%
Solubility h
Solid content
Effective
PH-Range
Apperance
PAM-NSG-1
3~6
≤5
≤2
≥90
1~8
White powder
PAM-NSG-2
5~7
≤5
≤2
≥90
1~8
White powder
PAM-NSG-3
8~10
≤5
≤2
≥90
1~8
White powder

The product is mainly used for sewage disposal.The serial prodcut can be used when sewage became acidic and with inorganic coagulant polymeric aluminum chloride and aluminum sulfate together.

In fine sorting of Mn Mine and floatation of Cu mine,dosage is about 2 ppm,and in agglutination of Alumina or bauxite,the dosage shall be 15 ppm.
For example,ore sorting in Baotou Rare Earth Metal Mine

Before Treatment
After Treatment
PAM,ppm
Turbid Liquor
Colorless and transpant
Nonionic PAM,3ppm

Extration (in filter cake)
Molecular Weight at8~10 million

PAM-NSG-1 With other chemicals can be used to size the textile chemical fiber and used fabric starching can be enhance osmosis and anti-eletricity behavior of the product and also can be used as sizing material directly.

The product with bentonite can be used as oil water-retaining and sand-binding agents and has good effect to tree planting on hill as well as sand-fixation and dirt-proof.

The product with wood fiber can be used as profile control plugging agent in oil field.

The product is packaged in woven bag lined with two-layer polyethylene plastic or kraft bag glued with palstic ,net weight is 25kg each bag

The granulatity of product is 20-80 mesh and can be produced on request of customers.

Mingquan hot selling 30% Polyaluminium Chloride PAC water treatment chemical

1)solube in water easily
2)high performance polymer
3)easy to dispose
4)mix water easily
5)long storage life
Main characteristics
Compared with other coagulant, the product has the following characteristics:
wide application scope and wide water suitability
It's easy to rapidly form big alum, with good precipitation performance.
Suitable and wide PH scope (between 5 and 9) with little decrease in PH and alkaline degree after water disposal.
When water temperature is low, stable precipitation effect can still be kept.
Alkalization degree is high than that of other subminimum salt andiron salt, with little corrosive effect on equipment.
Specification

Physical and Chemical properties
Appearance
Yellow powder Or Brown
Al
2
O
3
%
≥30
Basicity%
40--90
Insoluble matter in water%
≤0.3
PH Value(1% water solution)
3.5-5.0
Ammoniacal nitrogen%
≤0.01
As%
≤0.0002
Pb%
≤0.001
Cd%
≤0.0002
Hg%
≤0.00001
Cr
6+
%
≤0.0005

Usage
in odder to reach best flocculating effect and economic profit, customers can be determine best dispensing amount according to different turbidity of wasted water ,different season and different pool shape.Liquid product can be prepared to be 5-10% water solution and solid product can be prepared to be 3-50% water solution.

Storage:
Products should deposit indoors dry, ventilating, shady and cool place, and keep dry.


As a profession water treatment chemical supplier ,we can alsao provide the following products
1.polyacrylamide(PAM)
2.anionic polyaacrylamide (APAM)
3. cationic polyarylamide (APAM)
4.non-ionic polyacrylamide (NPAM)

Mixed Bed Ion Exchange Resin101

MB101 is a high quality resin mixture for direct purification of water.
Guaranteed Sales Specification
Units
OH - Form
H + Form
Polymer Matrix Structure
-
Gel PolyStyrene Crosslinked with DVB
Functional Group
-
Quaternary Amine
Sulfonic acid
Volume ratio
-
60% 201x4
40% 001x8
Total Exchange Capacity, min.
eq/l
1.15
1.9
Water Retention Capacity
%
53-60
45-50
Particle Size Distribution
-
-
-
>1.25 mm max.
%
5
5
<0.40 mm, max
%
2
2
Whole Bead Count, min.
%
95
95
Moisture Content as shipped, max
-
65%
PH Range, Stability
-
0-14
Shipping weight (approx.)
-
700-780 g/l (44-46 lb/ft 3 )
Operating
Non-regenerative bed
temperature
Regenerative bed
-
100°C (212°F) max.
60°C (140°F) max.
Ionic conversion, min.
%
90
99

Mixed bed resin

Mixed bed ion exhange resin, ready to use resin
MB600 Analog
used in filter cartridge, Ion exchange unit
Mixed bed Ion exchange resin

Product Name
Application
TA 007MB

Preparation of pure water, extreme pure water in mixed bed, with good hydraulic characteristics and physical stability

TA 207MB

TC 001MBD

Preparation of pure water, extreme pure water in mixed bed, with good hydraulic characteristics, physical stability and anti-oxidation property

TA 201MBD

TC 001TRD

Used in triple mixed bed used for preparation of pure water, extreme pure water, and condensate polishing, with excellent hydraulic characteristics. It can prevent mutual contamination of cationic and anionic resin, thus promote water quality and cycle water production.
TA 201TRD

TS-TR

TC 001CB

Substitute of TA 007MB, with dark black color appearance for convenience to operate.


Specification:
Ionic Form as Shipped: - H+ / OH-
Component: Cation resin 40% & Anion Resin 60%
Moisture Content: 65 % (max)
Particle Size Range: 300 - 1200 µm
Uniformity Coefficient (max.): 1.7
<300 µm (max.): 1 %
Temp Limit, Non-Regenerable Bed: 100°C (212°F)
Temp Limit, Regenerable Bed: 60°C (140°F)
Shipping Weight (approx.): 705 - 740 g/l (44.1 - 46.3 lb/ft3)

Packing:
1.

PE bag (25liters)

2. PE valve bag (25liters)

Acrylic panel for aquarium

Acrylic panel for aquarium
1.color: transparent
2.thickness: 20mm to 500mm
3.packing: PE film masking and KT board
Acrylic panel for aquarium

LEYU PLEXIGLASS has become a large integrated factory involving the production .Process and installation of acrylic glass. Leyu has accumulated rich experience through the 20 years' research and exploitation .Now ,with the capacity of producing super thick acrylic sheet .the company has a complete range of specifications.Which can supply the acrylic sheets of various shapes with anavailable thickness from 20mm to 500mm

Features
1.color is transparent (clear) and high brightness
2.strong plasticity can be easily shaped and processed
3.high resistance of pressure and strong shock resistance (16 times as strong as ordinary glass)
4.easy to maintain and clean. It can be scrubbed with soap and soft cloth

We serve customer with customized acrylic and turnkey project. In a word ,Just tell us your dimension or suggestion .We will try our best to satisfy you .You can rest assured that both our quality and service are the best


Term of payment
40% as advance payment by T/T after sign contract .60 % by T/T before delivery

Package
LEYU PLEXIGLASS adopt plastic protective film .High-quality KT board and wooden box or angle iron packing

The best advantage
After damage can be repaired


If you are interested in our product
Please contact me
Name: Lisa
The company phone: 0086-0512-58605292
The company fax: 0086-0512-58664192


Mixed bed cation and anion exchange resin MB400 Analog

Mixed bed ion exhange resin, ready to use resin
MB400 Analog
Demineralization, water softening
used in filter cartridge
Mixed bed Ion exchange resin

Product Name
Application
TA 007MB

Preparation of pure water, extreme pure water in mixed bed, with good hydraulic characteristics and physical stability

TA 207MB

TC 001MBD

Preparation of pure water, extreme pure water in mixed bed, with good hydraulic characteristics, physical stability and anti-oxidation property

TA 201MBD

TC 001TRD

Used in triple mixed bed used for preparation of pure water, extreme pure water, and condensate polishing, with excellent hydraulic characteristics. It can prevent mutual contamination of cationic and anionic resin, thus promote water quality and cycle water production.
TA 201TRD

TS-TR

TC 001CB

Substitute of TA 007MB, with dark black color appearance for convenience to operate.


Specification:
Ionic Form as Shipped: - H+ / OH-
Component: Cation resin 40% & Anion Resin 60%
Moisture Content: 65 % (max)
Particle Size Range: 300 - 1200 µm
Uniformity Coefficient (max.): 1.7
<300 µm (max.): 1 %
Temp Limit, Non-Regenerable Bed: 100°C (212°F)
Temp Limit, Regenerable Bed: 60°C (140°F)
Shipping Weight (approx.): 705 - 740 g/l (44.1 - 46.3 lb/ft3)

Packing:
1.

PE bag (25liters)

2. PE valve bag (25liters)

Mixed bed cation anion exchange resin

Mixed bed cation and Anion exhange resin, ready to use resin
Demineralization, water softening
used in filter cartridge
Mixed bed cation and anion exchange resin

Product Name
Application
TA 007MB

Preparation of pure water, extreme pure water in mixed bed, with good hydraulic characteristics and physical stability

TA 207MB

TC 001MBD

Preparation of pure water, extreme pure water in mixed bed, with good hydraulic characteristics, physical stability and anti-oxidation property

TA 201MBD

TC 001TRD

Used in triple mixed bed used for preparation of pure water, extreme pure water, and condensate polishing, with excellent hydraulic characteristics. It can prevent mutual contamination of cationic and anionic resin, thus promote water quality and cycle water production.
TA 201TRD

TS-TR

TC 001CB

Substitute of TA 007MB, with dark black color appearance for convenience to operate.


Specification:
Ionic Form as Shipped: - H+ / OH-
Component: Cation resin 40% & Anion Resin 60%
Moisture Content: 65 % (max)
Particle Size Range: 300 - 1200 µm
Uniformity Coefficient (max.): 1.7
<300 µm (max.): 1 %
Temp Limit, Non-Regenerable Bed: 100°C (212°F)
Temp Limit, Regenerable Bed: 60°C (140°F)
Shipping Weight (approx.): 705 - 740 g/l (44.1 - 46.3 lb/ft3)

Packing:
1.

PE bag (25liters)

2. PE valve bag (25liters)

Mixed bed cationic and anionic resin

Mixed bed resin, ready to use
Demineralization, water softening
used in cartrige, Ion exchange unit
Mixed bed Ion exchange resin

Product Name
Application
TA 007MB

Preparation of pure water, extreme pure water in mixed bed, with good hydraulic characteristics and physical stability
TA 207MB
TC 001MBD
Preparation of pure water, extreme pure water in mixed bed, with good hydraulic characteristics, physical stability and anti-oxidation property
TA 201MBD
TC 001TRD
Used in triple mixed bed used for preparation of pure water, extreme pure water, and condensate polishing, with excellent hydraulic characteristics. It can prevent mutual contamination of cationic and anionic resin, thus promote water quality and cycle water production.
TA 201TRD
TS-TR
TC 001CB
Substitute of TA 007MB, with dark black color appearance for convenience to operate.

Packing:
1.

PE bag (25liters)
2. PE valve bag (25liters)

Mixed bed ion exchange resin

Mixed bed resin, ready to use resin
Demineralization, water softening
used in cartrige, Ion exchange unit
Mixed bed Ion exchange resin

Product Name
Application
TA 007MB

Preparation of pure water, extreme pure water in mixed bed, with good hydraulic characteristics and physical stability
TA 207MB
TC 001MBD
Preparation of pure water, extreme pure water in mixed bed, with good hydraulic characteristics, physical stability and anti-oxidation property
TA 201MBD
TC 001TRD
Used in triple mixed bed used for preparation of pure water, extreme pure water, and condensate polishing, with excellent hydraulic characteristics. It can prevent mutual contamination of cationic and anionic resin, thus promote water quality and cycle water production.
TA 201TRD
TS-TR
TC 001CB
Substitute of TA 007MB, with dark black color appearance for convenience to operate.

Packing:
1.

PE bag (25liters)
2. PE valve bag (25liters)

Mixed bed ion exchange resin

Mixed bed resin, ready to use
Demineralization, water softening
used in cartrige, Ion exchange unit
Mixed bed Ion exchange resin

Product Name
Application
TA 007MB

Preparation of pure water, extreme pure water in mixed bed, with good hydraulic characteristics and physical stability
TA 207MB
TC 001MBD
Preparation of pure water, extreme pure water in mixed bed, with good hydraulic characteristics, physical stability and anti-oxidation property
TA 201MBD
TC 001TRD
Used in triple mixed bed used for preparation of pure water, extreme pure water, and condensate polishing, with excellent hydraulic characteristics. It can prevent mutual contamination of cationic and anionic resin, thus promote water quality and cycle water production.
TA 201TRD
TS-TR
TC 001CB
Substitute of TA 007MB, with dark black color appearance for convenience to operate.

Packing:
1.

PE bag (25liters)
2. PE valve bag (25liters)

Mixed-bed resin

Our Mixed-bed Resin is sold very well both at home and abroad.
For mixed bed applications (ready for use), non-regenerable, a comparative homogeneous mixture of a strongly acidic cation exchanger in the H+ form with a strongly basic anion exchanger in the OH- form, specifically designed for the partical demineralisation of water for the production of high purity water directly, HL9MB is mainly used for wire cutting edm cycle water.
Mixed-bed Resin HL9MB accords with qualification of China nation and trade standard.

Modified epoxy Acrylic resin

is a functional group epoxy acrylic polyester modified resin.curing speed fast,fine drying surface,good flexibility,high adhsion
Application
Is designed for UV wood coating, UV paper varnish, UV plastic coating .
characheristics and application:
Used for bamboo coating, have good sanding property, excellent flexibility, used for UV paper varnish, there is a comparative contribution with respect to speed read and strengthen flexibility.
the main technical parameters
1. Appearance : light yellow transparent liquid
2. Viscosity:25000± 4000CPS(25°c) (rotary viscometer) (NDJ-79 type).
3. functionality: 2
4.color: (Fe-Co): ≤6
5. Acid number Acid value: ≤ 6mgKOH / g (potassium hydroxide method).
Consistency and use condition:
BH-6204 can be suitable for polyester acrylates, same king of products, epoxy Acrylate and most of monomer. Have low contraction percentage, excellent flexibility and good ink wetting property, improve affinity between pigment and ink, be widely used in UV plastic, paper,, bamboo,, ink and so on.
NOTE:
1.storage and transportation with dark and non-transparent plastic drum or the container with rotproofing and solvent resistance coating . leave room of at least 15% for being full of air . STORE below 35°C COOL PLACE.
2. storage and transportation keep out of the direct sun, high temperature, or result in gelation phenomena
3.The product is of low toxicity, but still need to avoid direct contact with skin, if the contacts should be washed immediately with soap and water can be.
4.Storage period: 25 storage period of 6 months. Expired after passing through the test, can still be used.

Modified ABS&amp;PC/ABS alloy

Improve PC stress crack, Electroplatede, Environmental protection inflaming retarding, impact resistant.
Product Name: PC/ABS Alloy
Model Number: N5R50

Property
Test method
Unit
N5R50
Physical
Property
Density
ISO 1183
g/cm3
1.15
Molding shrinkage
D955
%
0.3-0.7
Water absorption
ISO62
%
0.15
Mechanical Property
Tensile strength
ISO527
Mpa
48
Flexural strength
ISO178
Mpa
75
Notched Impact 3.2mm,23°C
ISO179
Kj/m2
92
Thermal Property
Heat distortion temperature
ISO75
°C
96
Flammability
UL94

----
Electrical Property
Volume resistivity
IEC93
Ω.m
10
14
Dielectric strength
IEC243
Kv/mm
-----

Characteristic: Improve PC stress crack, Electroplatede

Application: Auto internal and external, widgets, high impact parts, electronic and electronic apparatus subassembly.

Modified Aluminium tripolyphosphate (29196-72-3)

Modified Aluminium tripolyphosphate (29196-72-3)
1.moisture:max1.0%
2.P2O5:42-46%
3.Al2O3:15-25%
4.SiO2:10-15%
Modified Aluminium tripolyphosphate

Applications:
This coloring pigment is able to widely substitute conventional toxic antirust pigments such as lead red and zinc chrome yellow in the production of various prime coats and combined coating materials. With good compatibility with varnish paints, it can be used together with various coloring pigments, filling agents and antirust pigments in the production of high performance anti-corrosion coating materials. Specifically, it is applicable to the production of dissolvent type of coating materials such as formaldehyde phenol resin, alkide resin, epoxy resin, epoxy polyester and acrylic resin as well as water-soluble resin coating materials such as highly adaptable water-soluble epoxy ester dipping paint. Besides, it is also applicable to the preparation of high build paint, powder coating, organic titanium-contained anticorrosion coating, on-rust paint, bituminous paint, zinc-rich primer, fire-retardant coating, heat-resistant paint, etc.

Test Items
Aluminum Tripolyphosphate
Modified Aluminum Tripolyphosphate
Aluminum Tripolyphosphate Hydrate
Color
Greyish white powder
Greyish white powder
White powder
Moisture Content(%)
≤1.5
≤1.5
≤1.5
Residue on Sieve(#325 Mesh)(%)
≤0.5
≤0.5
≤0.5
PH Value
5.5-7
5.5-7
2—4
Oil Absorption
35±5
35±5

P2O5(%)
35—40
42—46
60—70
Al2O3(%)
12-18
15-25
20—30
SiO2(%)
10—15
10—15

Standard
Enterprise Specifications
Q/84XS02-2004
Enterprise Specifications






















Modified Aluminium tripolyphosphate

Modified Aluminium tripolyphosphate
1.moisture:max1.0%
2.P2O5:42-46%
3.Al2O3:15-25%
4.CAS:29196-72-3
Modified Aluminium tripolyphosphate



Applications:
This coloring pigment is able to widely substitute conventional toxic antirust pigments such as lead red and zinc chrome yellow in the production of various prime coats and combined coating materials. With good compatibility with varnish paints, it can be used together with various coloring pigments, filling agents and antirust pigments in the production of high performance anti-corrosion coating materials. Specifically, it is applicable to the production of dissolvent type of coating materials such as formaldehyde phenol resin, alkide resin, epoxy resin, epoxy polyester and acrylic resin as well as water-soluble resin coating materials such as highly adaptable water-soluble epoxy ester dipping paint. Besides, it is also applicable to the preparation of high build paint, powder coating, organic titanium-contained anticorrosion coating, on-rust paint, bituminous paint, zinc-rich primer, fire-retardant coating, heat-resistant paint, etc.

Test Items
Aluminum Tripolyphosphate
Modified Aluminum Tripolyphosphate
Aluminum Tripolyphosphate Hydrate
Color
Greyish white powder
Greyish white powder
White powder
Moisture Content(%)
≤1.5
≤1.5
≤1.5
Residue on Sieve(#325 Mesh)(%)
≤0.5
≤0.5
≤0.5
PH Value
5.5-7
5.5-7
2—4
Oil Absorption
35±5
35±5

P2O5(%)
35—40
42—46
60—70
Al2O3(%)
12-18
15-25
20—30
SiO2(%)
10—15
10—15

Standard
Enterprise Specifications
Q/84XS02-2004
Enterprise Specifications






























Monday, August 29, 2011

Acrylic processing aid(YM -125)

all-acrylic,general purpose additive designed for PVC building applications,injected parts and PVC foam products

YM-125 is all-acrylic,general purpose additive designed for PVC building applications,injected parts and PVC foam products,which has better plasticization than YM- 401.It has a high molecular weight.

The tech data is as follows:
TYPE
VISCOSITY(μ)
APPEARANCE
GRANULARITY(0.45mm standard seive)%
VOLATILE CONTENTS(%)
Apparent density(g/cm3)
YM-125
8.0-10.0
White powder
≥98
≤1.3
0.3-0.5

Application field
: PVC building applications, such as window profiles, panels, sidings, fences, pipes, fittings, injected parts. and PVC foam products

Recommendation usage
:1.0-1.5phr per 100 PVC resin.

Packing
:25kg/bag,PP bag with PE liner

Remarks
: it is equivalent to K-125 of Rohm&Haas

Modified CPE Resin(CPE-102)

Modified chlorinated polyethylene (CPE) resins are the copolymer of ethylene, vinyl chloride and rubber.
Modified CPE Resin(CPE-102)

Products Description
Modified chlorinated polyethylene (CPE) resins are the copolymer of ethylene, vinyl chloride and rubber
.

Products Hall
Color: White, Blue. Shape: Round granular. Type: I, II
.

Physical Properties
CPE-102 are good chemical resistance, abrasion resistance, weather resistance, and good environmental stress cracking resistance.
CPE-102 are modified materials, good processing performance, could be calendering on any extruder.
Application Range
CPE -102 resin is the good raw material for building waterproof products, wires, and cab
le.

Modified CPE Resin(CPE-102)

Modified chlorinated polyethylene (CPE) resins are the copolymer of ethylene, vinyl chloride and rubber.
Modified CPE Resin(CPE-102)

1. Products Description
Modified chlorinated polyethylene (CPE) resins are the copolymer of ethylene, vinyl chloride and rubber
.

2.Products Form
Color: White, Blue. Shape: Round granular. Type: I, II.
3.Physical Properties
CPE-102 are good chemical resistance, abrasion resistance, weather resistance, and good environmental stress cracking resistance.
CPE-102 are modified materials, good processing performance, could be calendering on any extruder.
4.Application Range
CPE -102 resin is the good raw material for building waterproof products, wires, and cable
.

Modified CPE Resin(CPE-102)

Modified chlorinated polyethylene (CPE) resins are the copolymer of ethylene, vinyl chloride and rubber.

Modified CPE Resin(CPE-102)
1.
Products Description
Modified chlorinated polyethylene (CPE) resins are the copolymer of ethylene, vinyl chloride and rubber
.

2.Products Hall
Color: White, Blue. Shape: Round granular. Type: I, II.
3.Physical Properties
CPE-102 are good chemical resistance, abrasion resistance, weather resistance, and good environmental stress cracking resistance.
CPE-102 are modified materials, good processing performance, could be calendering on any extruder.
4.Application Range
CPE -102 resin is the good raw material for building waterproof products, wires, and cable
.

Modified CPE Resin(CPE-102)

Modified chlorinated polyethylene (CPE) resins are the copolymer of ethylene, vinyl chloride and rubber.
Modified CPE Resin(CPE-102)
Products Description
Modified chlorinated polyethylene (CPE) resins are the copolymer of ethylene, vinyl chloride
and
rubber.
Products Form
Color: White, Blue. Shape: Round granular. Type: I, II.
Physical Properties
CPE-102 are good chemical resistance, abrasion resistance, weather resistance, and good environmental stress cracking resistance.
CPE-102 are modified materials, good processing performance, could be calendering on any extruder.
Application Range
CPE -102 resin is the good raw material for building waterproof products, wires, and

cable.

Modified EPDM resin(OP-105)

OP modified ethylene propylene diene monomer (EPDM) resins are ethylene-propylene copolymer rubber
Modified EPDM resin(OP-105)
1.Products Description
OP modified ethylene propylene diene monomer (EPDM) resins are ethylene-propylene copolymer rubber and thermoplastic PU vulcanized by heating to made of resin particles
2.Products Form
Color: black Shape: Semi-granular

3.Physical Properties
OP-105 has good tensile strength (≥ 12Mpa), rebound performance and excellent crack resistance in low-temperature( -40 °C) still maintain good flexibility.
OP-105 has a good mobile performance,easy to extrusion processing.
4.Application Range
OP-105 is raw materials of roofing waterproof membrane
.