RO membrane
Reverse Osmosis membrane ULP2012-100
prompt reply
small order accepted
REVERSE OSMOSIS ULP2012-100
Salt Rejection: 96%
Description
is widely used in small water treatment equipment such as pure water dispenser, hospital, laboratory pure water equipment.
.Membrane Type: Thin-film Composite
.Membrane Material: PA(Polyamide)
.Membrane Surface Charge: Negative
.Element Configuration: Spiral-Wound, Tape wrapping
Important Notice
Elements contain preservative solution, therefore the permeate from the first hour of operation should be discarded, If the operating conditions in this document are not followed, no warranty of the element is honored.
Operating Limits
,Max. Operating pressure 125psi (0.86Mpa)
.Max. Feed flow rate 2gpm (0.45m3/hr)
.Max. Operating temperature 113 F (45 C)
.Operating pH range 3.0~10.0
.Max. Turbidty 1.0NTU
.Max. SDI (15 rain) 5.0
.Max. Free Chlorine concentration 0.1mg/L
Packing:
25pieces/box
No comments:
Post a Comment