Mud Additives Filtrate Loss Controller Copolymer 80A-51 Granule

A better clay capsulating agent with high molecular weight used to treat low solid drilling fresh water mud .
Copolymer of acrylamide and sodium polyacrylate
80A-51

is a macromolecule polymer. It can be compatible with other drilling fluid finishing agent and has a good thickening effect of fluid. In addition, it can improve ROP, prevent borehole enlargement, reduce down hole problems and cut mud costs. It can be easily dissolved in water with high molecular weight, but it can not be dissolved in ketones, esters, hydrocarbons and other organic solvents.
It is used to treat low solid drilling fresh water mud as anti-caving agent, flocculant, viscosifier.

Advantages:
1. Better clay capsulating agent
2. Excellent antistaining and heat resistance
3. Good settleability, flocculability and shear thinning.

Specifications:
Item
Index
Appearance
white or slight yellow free flow powder
Inherent viscosity , dl/g
≥6.0
Moisture, %
≤8.0
Fineness(Residue on 0.9mm sieve), %
≤5.0
Apparent viscosity, mPa.s
Normal temperature
≥35
boiling in 120
o
C for 16h
≥25
Plastic viscosity , mPa.s
Normal temperature
≥17
boiling in 120
o
C for 16h
≥12
Yield value, Pa
Normal temperature
≥18
boiling in 120
o
C for 16h
≥10
Loss on filtration, ml
Normal temperature
≤25
boiling in 120
o
C for 16h
≤35

Other Products:
1. Cationic Polyacrylamide, Anionic Polyacrylamide, Non-ionic polyacrylamide
2. Copolymer of polyacrylamide and sodium polyacrylate 80A-51
3. Hydrolyzed Polyacrylonitrile Ammonium Salt NH4-HPAN
4. Hydrolyzed Polyacrylonitrile Sodium Salt Na-HPAN
5. Potassium Polyacrylate K-PAM
6. Sulfonated Gilsonite Powder
7. Carboxymethyl cellulose (CMC)
8. Polyaluminium Chloride (PAC)
9. Complex Ionic Acrylate FA-367
10. Fluid Loss Additives SL-ll
11.Potassium Humate (HA-K)