Monday, May 30, 2011

concrete wave fiber for take place of steel fiber

1.concrete wave fiber is mainly used to reinforce performance of concrete.
2.it could take place of steel fiber to use.

Introduction

Concrete wave fiber is a kind of building material, it could take place of steel fiber to use, also has some specialties of the thin synthetic fiber. Compared with the steel fiber, it has the special features of anti-corrosion, anti-dispersion ,anti-operation, no damage to the mixing equipment, etc
This product is made of synthetic resin by special technique, has the advantages of high-breaking tenacity, high-gripping force and excellent dispersivity in the concrete.
It can take place of steel fiber for the cement concrete, to improve the capability of crisp, the low-tensile strength, the low-elongation ultimate of the concrete instead of anti-stretch, anti-bending, anti-fatigue, high-tenacity and so on, so it got wide application in the construction, roads, bridges, hydraulic engineering and other engineering fields



Specification
Regular Spec: TB-Wave -25S

Material Form
synthetic resin
Identical Diameter (mm)
1.0
Color
black; white
Shape
waviness
Length(mm)
25±2;40±2,50±2
Tensile Strength(MPa)
≥280

Note: The range of length 3-50mm, and according to the your demand

Function


1. Decrease the danger from crack of the concrete; increase the intensity of anti-stretch, anti-bending, anti-breaking of the concrete
2. Decrease the breakage when earthquake or other terrible natural disasters happen
3. Decrease the inner fatal defect of the concrete; increase the anti-infiltration performance of the concrete
4. Protect the steel bar from corroding; increase the durability of the concrete structure
5. Increase the abrasive resistance of the concrete
6. No abrasion to the mixing equipment
7. Prevent the damage to the tires

Application

1. For culverts support, natural terrain revetment and other support engineering, owe to its high anti-bending and tensile strength
2. For the impounding reservoirs, low pressure-water pipes and the anti-infiltration of the basements, because of its high performance of anti-crack
3. For the position of high-speech running water, e.g., the spillways and sluice boards of the Hydraulic and Hydro-Power Engineering, because of its high performance of anti-impact and anti-abrasion
4. Better for the concrete engineering in the condition of being corroded by the seawater, because it is made of synthetic resin with the specialty of the steel fiber
5. For bearing the live load, such as bridges of the highway, railways and other engineering, because its high performance of fracture toughness, anti-stretch, anti-fatigue etc

Compare with Steel Fiber in Economy

Concrete wave fiber is made according to the function of the steel fiber. Its shape of cross section and specific surface area are similar to the steel fiber, so when compare the economy of the two kind of material, we could suppose that they have the same specific surface area and the proportion of the reinforced anti-crack tendon is 0.95kg/cm
3
, the proportion of steel is 7.8g/cm
3
, under the condition of same adding volume, the weight of steel fiber is 8.0 times of the anti-crack tendon’s, so it is clear that use anti-crack tendon can reduce the cost quite a lot than use steel fiber.

No comments:

Post a Comment