sodium polyacrylate(polyacrylic acid)

1.red mu flocculants for alumina
2.Flocculating powerfully
3.fast and steady flocculation
4.Small and tight flocks
1.Applications:
Flocculants may accelerate the separation of red mud and the suspension in sodium aluminate solution, link the small disperse red mud particles into floccules, the settlement speed will be highly accelerated.
It can be used again during washing tank for the purpose of accelerating the settlement and catching up the demand of clear effusion.

2.Characteristics:
*High flocculant capacity, fast and steady flocculant process. Forming small, firm and cut bearing floccules.
*Low underflow W:V, low content of suspended matter, wide application, and strong volatility resistant capacity.
*Prevent the red mud from expanding, little influence from temperature and PH value.

3.Using Methods:
*Mix alkali solution into 0.5%-1%(w/w)at 40°C-60°C for agitation.
*Mix flocculant 0.2%-0.5%(w/w) solution into alkali solution for agitation; CR series products should be stirred before dissolution.
*Flocculant solution should be kept dissolved completely by stewing for 3o minutes in the tank, for the purpose of enhancing the using effect.

4. Quality index:
CN series sodium polyacrylate(polyacrylic acid)
Index
specification
Appearance
White Powder
Solid Content
≥88%
Molecular Weight
5-25 million
Dissolving time
≤60min

5. Packages:
CN series products are packed in 25 Kg paper plastic three-in-one compound woven bags, or according to users’ requirement.