PVC Processing Aids Super plasticizing type DLC Series

1 name:PVC Processing Aids super plasticizing type DLC series
2 type:acrylic 3 particle size(40 mesh passing percentage%):>=98
PVC PVC Processing Aids Super plasticizing type DLC Series

1.Product Description

The plasticizing ability of DLC series is much stronger than the other PVC processing aids. It can be used in the recipes of some materials which are hard to be plasticized, such as calcium carbonate (high), large dosage of lubricants or other kinds of modifiers. It has been widely used in the production of big diameter bellows or some riffled tubes.

2.Performance

Better dispersivity and ductility in PVC products processing, enhance extensibility,elasticity and improve melt homogeneity of the compounds.

Promote PVC plasticizing , increase melt strength, Increase the surface quality of PVC products. Offer excellent surface cleanliness, wall-thickness control and good thermoforming capabilities.


3.Typical Physical Properties


Index
DLC-50
DLC-60
Appearance
White free flowing powder
White free flowing powder
Particle size (40 mesh passing percentage %)
≥98
≥98
Volatiles Content (%)
≤1.0
≤1.0
Bulk Density(g/cm
3
)
0.3-0.6
0.3-0.5




3.Application



Product
Properties
Recommended dosage(phr)
Transparency
Promote fusion
Melt strength
Rheological property
Dispersivity
pipes, sections, pipe fittings
Planks.
Wood plastic composites
DLC-50
Good
Good
High
Good
Better
0.8-1.0
6.0-10.0
DLC-60
Good
Good
Higher
Good
Good
0.8-1.0
8.0-10.0











The customers may choose suitable ACR type and the dosage according to different type of product’s features, their needs, the directions for the products and the features of the facilities. If you put forward the specific request, we can recommend you the suitable type and the dosage through experiments.