Food grade Ion exchange resin
For drinking water softening and desalination
Ion Exchange Resin
Cation exchange resin
Food Grade Ion Exchange Resin
1.Resin for Food Grade can meet FDA standard of U.S.A.
2.Resin for Food Grade complies with Sanitary Supervision and Management Regulation for Drinking Water of Chinese health authorities and has been issued Food Hygiene Approval Permit.
3.Food Grade Ion Exchange Resin doesn’t contain substances which are harmful to human body and tainted.
4.It has been widely used in decolorization, demineralization, softening aspect in food, drinking water and some other industries.
5.Quality Inspection Staff Seeking Ever Greater Perfection: Each inspector had to go through rigorous technical training so as to foster and seeking ever greater perfection and in turn to strictly control product quality.
6.Inspection of raw materials: Rigorous inspection of raw materials is the foundation of product quality.
Applications:
Mainly used for drinking water softening and desalination, and antibiotic extracting, etc.
Specification
NO.
ITEM
SPEC
1
Type
Strongly acidic
2
Matrix
Polystyrene
3
Function group
-SO
3
-
4
Ionic form
Na
+
5
Moisture content (%)
45-55
6
Quality Total Exchange Capacity (mmol/g)
≥4.5
7
Total exchange capacity (mmol/ml)
≥1.9
8
Defined Shear Rate (%)
≥90
9
Bulk Density (g/ml)
0.75-0.85
10
True Density (g/ml)
1.25-1.30
11
Particle Size Range (%)
0.315-1.25 mm≥90
12
Applicable PH
1-14
Packing
1.
PE bag (25liters)
2. PE valve bag (25liters)
Contact
Tel:0086-351-3343082
fax:0086-351-3343281
Tuesday, September 27, 2011
Drinking water weak acid ion exchange resin
Food grade weak acid Ion exchange resin D113
Meet America FDA standard
Remov hardness and alkalies in drinking water
Food grade weak acid Ion exchange resin D113
1. Resin for Food Grade can meet FDA standard of U.S.A.
2. Resin for Food Grade complies with Sanitary Supervision and Management Regulation for Drinking Water of Chinese health authorities and has been issued Food Hygiene Approval Permit.
3. Food Grade Ion Exchange Resin doesn’t contain substances which are harmful to human body and tainted.
4. It has been widely used in decolorization, demineralization, softening aspect in food, drinking water and some other industries.
5. Quality Inspection Staff Seeking Ever Greater Perfection: Each inspector had to go through rigorous technical training so as to foster and seeking ever greater perfection and in turn to strictly control product quality.
6. Inspection of raw materials: Rigorous inspection of raw materials is the foundation of product quality.
Applications:
Used in removal of hardness and alkalies in drinking water, fruit juice and beverages to improve taste
Specification:
NO.
ITEM
SPEC
1
Type
Macroporous Weakly Acidic
2
Matrix
Acrylic acid
3
Function group
-COO
-
4
Ionic form
H
+
5
Moisture content (%)
45-52
6
Quality Total Exchange Capacity (mmol/g)
≥10.8
7
Total exchange capacity (mmol/ml)
≥4.0
8
Defined Shear Rate (%)
≥90
9
Bulk Density (g/ml)
0.72-0.80
10
True Density (g/ml)
1.14-1.20
11
Particle Size Range (%)
0.315-1.25 mm≥90
12
Applicable PH
1-14
Comparison:
Bayer: CNP-80 PUROLITE: C104E AMBERLITE: IRC-76/84/86
Packing:
25 Liter PE bags
Contact:
Tel: 0086-351-3343081
Fax: 0086-351-3343281
Meet America FDA standard
Remov hardness and alkalies in drinking water
Food grade weak acid Ion exchange resin D113
1. Resin for Food Grade can meet FDA standard of U.S.A.
2. Resin for Food Grade complies with Sanitary Supervision and Management Regulation for Drinking Water of Chinese health authorities and has been issued Food Hygiene Approval Permit.
3. Food Grade Ion Exchange Resin doesn’t contain substances which are harmful to human body and tainted.
4. It has been widely used in decolorization, demineralization, softening aspect in food, drinking water and some other industries.
5. Quality Inspection Staff Seeking Ever Greater Perfection: Each inspector had to go through rigorous technical training so as to foster and seeking ever greater perfection and in turn to strictly control product quality.
6. Inspection of raw materials: Rigorous inspection of raw materials is the foundation of product quality.
Applications:
Used in removal of hardness and alkalies in drinking water, fruit juice and beverages to improve taste
Specification:
NO.
ITEM
SPEC
1
Type
Macroporous Weakly Acidic
2
Matrix
Acrylic acid
3
Function group
-COO
-
4
Ionic form
H
+
5
Moisture content (%)
45-52
6
Quality Total Exchange Capacity (mmol/g)
≥10.8
7
Total exchange capacity (mmol/ml)
≥4.0
8
Defined Shear Rate (%)
≥90
9
Bulk Density (g/ml)
0.72-0.80
10
True Density (g/ml)
1.14-1.20
11
Particle Size Range (%)
0.315-1.25 mm≥90
12
Applicable PH
1-14
Comparison:
Bayer: CNP-80 PUROLITE: C104E AMBERLITE: IRC-76/84/86
Packing:
25 Liter PE bags
Contact:
Tel: 0086-351-3343081
Fax: 0086-351-3343281
Monday, September 26, 2011
Dyeing decolourize
Dyeing decolourize
1. Appearance: Colorless liquid
2. Solid Content:50%
3. Viscosity:50-500mPa.s
4. PH:3.0-5.0
Dyeing decolourize
Our Water Decoloring Agent is used for color removal of dyeing wastewater or effluent with color problem.
Features:
1) Quaternary cationic polymer
2) Application:
A) Decoloring, flocculating, COD decreasing
B) Mainly used for color removal for dense color waste water from
Dyestuffs plants, suitable to treat waste water with activated, acidic
And disperse dyestuffs
C) Can also be used to treat waste water from textile industry and dye
Houses, pigment industry, printing ink industry and paper industry
3) Appearance: Light-color, sticky liquid
4) Viscosity: 50 - 250mPa. S (20º C)
5) Solid content: >50%
6) PH 30% solution: 3 - 5
7) Specific gravity: 1.2 - 1.3 (25º C)
8) Harmless, no-flammable and non-explosive
9) Usage:
A) Dilutes with 10 - 40 times water and then dosed into the waste water
Directly, after being mixed for several minutes, waste is precipitated or
Air-floated and the water become clear
B) Ph index of the waste water should be adjusted to 7 - 10 for better
Result
C) If colority and COD are relatively high, it can be used with the help of
Polyaluminum chloride to reduce treatment cost, whether polyaluminum
Chloride is used before or afterwards depends on the flocculation test
And the treatment process
10) Storage: Can be stored at room temperature, can not be placed in the
Sun, within a temperature range of 10 - 30º C
1. Appearance: Colorless liquid
2. Solid Content:50%
3. Viscosity:50-500mPa.s
4. PH:3.0-5.0
Dyeing decolourize
Our Water Decoloring Agent is used for color removal of dyeing wastewater or effluent with color problem.
Features:
1) Quaternary cationic polymer
2) Application:
A) Decoloring, flocculating, COD decreasing
B) Mainly used for color removal for dense color waste water from
Dyestuffs plants, suitable to treat waste water with activated, acidic
And disperse dyestuffs
C) Can also be used to treat waste water from textile industry and dye
Houses, pigment industry, printing ink industry and paper industry
3) Appearance: Light-color, sticky liquid
4) Viscosity: 50 - 250mPa. S (20º C)
5) Solid content: >50%
6) PH 30% solution: 3 - 5
7) Specific gravity: 1.2 - 1.3 (25º C)
8) Harmless, no-flammable and non-explosive
9) Usage:
A) Dilutes with 10 - 40 times water and then dosed into the waste water
Directly, after being mixed for several minutes, waste is precipitated or
Air-floated and the water become clear
B) Ph index of the waste water should be adjusted to 7 - 10 for better
Result
C) If colority and COD are relatively high, it can be used with the help of
Polyaluminum chloride to reduce treatment cost, whether polyaluminum
Chloride is used before or afterwards depends on the flocculation test
And the treatment process
10) Storage: Can be stored at room temperature, can not be placed in the
Sun, within a temperature range of 10 - 30º C
Dyeing effluent decoloring agent
Solid Content:50%
Viscosity:50-500
Application:COD removal,effluent from textile, printing, dyeing industry
This product is a quaternary ammonium cationic polymer. It has excellent efficiency in decoloring, flocculating and COD removal.
Properties
1.The product is mainly used to decolor the effluent with high chromaticity from the dyestuff plant. It is adequate for activated, acidic and dispersing dyes.
2.The product is also used in the treatment of effluent from textile, printing &dyeing industry and printing ink.
3.The rate of decoloring is more than 95% in wastewater treatment, and the rate of COD removal is between 40% and 70%.
Specifications
Item
DC-50
Appearance
colorless or light-color sticky liquid
Dynamic viscosity (cps,20°C)
50~500
pH (30% water solution)
3.0~5.0
Solid content % ≥
50
The product can be made upon customers' special request.
Application Method & Notes
1.The product shall be diluted with 10~40 times water, then added to the wastewater directly. After stirring for several minutes, the clear water will be got by precipitation or air-floatation.
2.The optimized pH of the wastewater accepted is 6-10.
3.It is recommended to use this product with the inorganic flocculants to treat the effluent with high color and COD to reduce the operation cost. The order and proportion of agent dosage depend on the flocculation test and the effluent treatment process.
4.The product is nonflammable and unexplosive. The suitable storage temperature is 5~30°C. Insolation is forbidden.
5.The product is packed in plastic drums according to the requirements of clients.
6.The product would show layer separation and become white at low temperature. There is no negative impact on the usage after mixing up.
7. The shelf life is 12 months.
8. The product has some corrosivity. It needs lots of water to wash if the product splashes into eyes.
Viscosity:50-500
Application:COD removal,effluent from textile, printing, dyeing industry
This product is a quaternary ammonium cationic polymer. It has excellent efficiency in decoloring, flocculating and COD removal.
Properties
1.The product is mainly used to decolor the effluent with high chromaticity from the dyestuff plant. It is adequate for activated, acidic and dispersing dyes.
2.The product is also used in the treatment of effluent from textile, printing &dyeing industry and printing ink.
3.The rate of decoloring is more than 95% in wastewater treatment, and the rate of COD removal is between 40% and 70%.
Specifications
Item
DC-50
Appearance
colorless or light-color sticky liquid
Dynamic viscosity (cps,20°C)
50~500
pH (30% water solution)
3.0~5.0
Solid content % ≥
50
The product can be made upon customers' special request.
Application Method & Notes
1.The product shall be diluted with 10~40 times water, then added to the wastewater directly. After stirring for several minutes, the clear water will be got by precipitation or air-floatation.
2.The optimized pH of the wastewater accepted is 6-10.
3.It is recommended to use this product with the inorganic flocculants to treat the effluent with high color and COD to reduce the operation cost. The order and proportion of agent dosage depend on the flocculation test and the effluent treatment process.
4.The product is nonflammable and unexplosive. The suitable storage temperature is 5~30°C. Insolation is forbidden.
5.The product is packed in plastic drums according to the requirements of clients.
6.The product would show layer separation and become white at low temperature. There is no negative impact on the usage after mixing up.
7. The shelf life is 12 months.
8. The product has some corrosivity. It needs lots of water to wash if the product splashes into eyes.
Dyes effulent decoloring agent
1 Dyes effulent decoloring agent
2 For waste water
3 Color removal
4 Organic coagulant
5 Organic removal
Dyes effulent decoloring agent
1.The product is mainly used to decolor the effluent with high chromaticity from the dyestuff plant. It is adequate for activated, acidic and dispersing dyes.
2.The product is also used in the treatment of effluent from textile, printing &dyeing industry and printing ink.
3.The rate of decoloring is more than 95% in wastewater treatment, and the rate of COD removal is between 40% and 70%.
SPECIFICATIONS
1. Appearance: light-color, sticky liquid
2. Viscosity: 50-250 m Pa.s (20°C)
3. Solid content: >50%
4. pH, 30% solution: 3-5 5. Specific gravity : 1.2-1.3 (25°C)
APPLICATION METHODS
1. The product shall be diluted with 10-40 times water and then dosed into the waste water directly. After being mixed for several minutes, it can be precipitated or air-floated to become clear water.
2. The pH value of the waste water should be adjusted to 7-10 for better result.
3. When the colority and COD are relatively high, it can be used with the help of polyaluminum chloride, but not mixed together. In this way, the treatment cost can be lowered. Whether polyaluminum chloride is used beforewards or afterwards depends on the flocculation test and the treatment process.
PACKAGE AND STORAGE
1. It is harmless, no-flammable and non-explosive, it can be stored at room temperature, it can not be placed in the sun.
2. It is packaged in plastic drums with each containing 1.25kgs
3. Storage temperature: 10-30 °C.
2 For waste water
3 Color removal
4 Organic coagulant
5 Organic removal
Dyes effulent decoloring agent
1.The product is mainly used to decolor the effluent with high chromaticity from the dyestuff plant. It is adequate for activated, acidic and dispersing dyes.
2.The product is also used in the treatment of effluent from textile, printing &dyeing industry and printing ink.
3.The rate of decoloring is more than 95% in wastewater treatment, and the rate of COD removal is between 40% and 70%.
SPECIFICATIONS
1. Appearance: light-color, sticky liquid
2. Viscosity: 50-250 m Pa.s (20°C)
3. Solid content: >50%
4. pH, 30% solution: 3-5 5. Specific gravity : 1.2-1.3 (25°C)
APPLICATION METHODS
1. The product shall be diluted with 10-40 times water and then dosed into the waste water directly. After being mixed for several minutes, it can be precipitated or air-floated to become clear water.
2. The pH value of the waste water should be adjusted to 7-10 for better result.
3. When the colority and COD are relatively high, it can be used with the help of polyaluminum chloride, but not mixed together. In this way, the treatment cost can be lowered. Whether polyaluminum chloride is used beforewards or afterwards depends on the flocculation test and the treatment process.
PACKAGE AND STORAGE
1. It is harmless, no-flammable and non-explosive, it can be stored at room temperature, it can not be placed in the sun.
2. It is packaged in plastic drums with each containing 1.25kgs
3. Storage temperature: 10-30 °C.
E-44 epoxy resin
A type of basic epoxy resin which can be widely used in many areas.
It is colorless or light yellow viscous liquid with low
This type of epoxy resin colorless is transparent, low viscosity, good anticorrosion property. It is a kind of good paint resins, often used in cars, floor, anticorrosive, less solvent coatings fields. Meanwhile, this resin is often used in electronic potting, electrical pouring for it's excellent electrical insulation function. In the composite materials, it can make make many kinds of good performance epoxy fiberglass composite products when it compound with glass fiber; With carbon fiber composite, it can produce the rod and the racket, auto parts, motorcycle parts such as epoxy carbon fiber products.
It is colorless or light yellow viscous liquid with low
This type of epoxy resin colorless is transparent, low viscosity, good anticorrosion property. It is a kind of good paint resins, often used in cars, floor, anticorrosive, less solvent coatings fields. Meanwhile, this resin is often used in electronic potting, electrical pouring for it's excellent electrical insulation function. In the composite materials, it can make make many kinds of good performance epoxy fiberglass composite products when it compound with glass fiber; With carbon fiber composite, it can produce the rod and the racket, auto parts, motorcycle parts such as epoxy carbon fiber products.
99.5% Maleic Anhydride
99.5% Maleic Anhydride
1.CAS No.:108-31-6
2.Use: make unsaturated polyester resin, paint, paper treatment
3.Purity:99.5%
99.5% Maleic Anhydride
1.Apperance:White needle-like, briquette or flaky crystalline
2.Standard:GB3676-92
3.Purity:99.5%
4.Specification:
Physical Properties
Maleic Anhydride
Molecular formula
C4H2O3
CAS NO.
108-31-6
Appearance
White needle-like, briquette or flaky crystalline
Content
≥99.5%
Molten Color
≤20.0
Crystallization point
≥52.4
Ash content
≤0.005%
ron content
5 mg/kg
TEST RESULTS
QUALIFIED
5.Packing:
25kg/pp bag, 22MT/20'FCL
6.Application:
Maleic anhydride is an important organic chemical raw material and is mainly used to make unsaturated polyester resin, paint, paper treatment agent, medicine, food additive, artificial leather and marble.
Loading in packing: 20mt with pallets
1.CAS No.:108-31-6
2.Use: make unsaturated polyester resin, paint, paper treatment
3.Purity:99.5%
99.5% Maleic Anhydride
1.Apperance:White needle-like, briquette or flaky crystalline
2.Standard:GB3676-92
3.Purity:99.5%
4.Specification:
Physical Properties
Maleic Anhydride
Molecular formula
C4H2O3
CAS NO.
108-31-6
Appearance
White needle-like, briquette or flaky crystalline
Content
≥99.5%
Molten Color
≤20.0
Crystallization point
≥52.4
Ash content
≤0.005%
ron content
5 mg/kg
TEST RESULTS
QUALIFIED
5.Packing:
25kg/pp bag, 22MT/20'FCL
6.Application:
Maleic anhydride is an important organic chemical raw material and is mainly used to make unsaturated polyester resin, paint, paper treatment agent, medicine, food additive, artificial leather and marble.
Loading in packing: 20mt with pallets
Subscribe to:
Posts (Atom)