Polymer: June 2011

Thursday, June 30, 2011

Prevent limescale

1.For topside and downhole squeeze application
2.Stable at a temperature to 200C
3.Environmentally friendly
4. Biodegradable
Prevent Limescale

1.PHYSICAL PROPERTIES

Appearance
clear/amber liquid/slightly haze
Specific Gravity@20C
1.15-1.20
Flashpoint,PMCC
not less than 100C
PH@20degC
4.5-6.0

2.APPLICATIONS
1).SUID-SI-3 can be used as a downhole scale squeeze inhibitor for inhibition of carbonate and sulphate scale in the production tubing and near wellbore areas.

2).SUID-SI-3 can be used as a topside scale inhibitor of inhibition of carbonate and sulphate scale
treatments in the oil/water pipelines.

3).SUID-SI-3 can be applied as water treatment agent to control the scale deposition in other
industries.

3.REMARKS
SUID-SI-3 is a water-based product so avoid using carbon steel,stainless steel,polyethylene
and polypropylene are compatible with this product.

SUID-SI-3 should be stored in epoxy/phenolic lined,and polyethylene containers.Keep container
closed to prevent product contamination and evaporation. Use with adequate ventilation.

Price for Food safe resin 001*7

Food Grade Cation exchange resin for softer
Strongly acidic cation exchange resin
Drinking water softening and desalination
Food Safe Cation Exchange Resin for drinking water
1. Food Grade Ion Exchange Resin can meet FDA standard of U.S.A.
2. Food Grade Ion Exchange Resin complies with Sanitary Supervision and Management Regulation for Drinking Water of Chinese health authorities and has been issued Food Hygiene proval Permit.
3. Food Grade Ion Exchange Resin doesn’t contain substances which are harmful to human body and tainted.
4. It has been widely used in decolorization, demineralization, softening aspect in food, drinking water and some other industries.
5. Quality Inspection Staff Seeking Ever Greater Perfection: Each inspector had to go through rigorous technical training so as to foster and seeking ever greater perfection and in turn to strictly control product quality.
6. Inspection of raw materials: Rigorous inspection of raw materials is the foundation of product quality.
TC 007FG
Applications
:
Mainly used for drinking water softening and desalination, and antibiotic extracting etc.
Specification:
NO.
ITEM
SPEC
1
Type
Strongly acidic
2
Matrix
Polystyrene
3
Function group
-SO
3
-
4
Ionic form
Na
+
5
Moisture content (%)
45-55
6
Quality Total Exchange Capacity (mmol/g)
≥4.5
7
Total exchange capacity (mmol/ml)
≥1.9
8
Defined Shear Rate (%)
≥90
9
Bulk Density (g/ml)
0.75-0.85
10
True Density (g/ml)
1.25-1.30
11
Particle Size Range (%)

0.315-1.25 mm≥90

Comparison
:
PuroLite: C100E Bayer: S100LF Rohm & Haas: SR1L
Packing:
1. PE bag (25 liters)
2. PE valve bag (25 liters)

Pictures:

Processing Aid for pvc foam board(ZB-530)

ZB-530 is foam adjustment agent made from acrylate monomer by emulsion polymerization process.

Foam modifier for PVC
It is mainly used to improve the uniformity of the foaming hole,promote fusion and melt,improve the surface quality of the finished product.
When it is used as foaming adjustment agent, it can endow with higher melt strength, better plastication and fluidity,it can have the foamed product keep down well-distributed and dense air bubble,Thus has homogeneous foaming structure.
When it is used as processing aid,it can endow with better surface lustrousness,greatly increase the melt strength.It is particularly suitable for working formulation with high filling.
It is white powder. It can be dissolved in ketone and chloroform,but not in wanter and alcohol.

Quality Specification
Item
ZB-530 Series
Inherent Viscosity [η], 25
6~14
Bulk Density, g/cm
3
0.35~0.45
Volatile Matter,% ≤
1.0
Particle Size 0.45mm (40 mesh) passed% ≥
98

Main application:
To be used in rigid pvc foamed board,pvc fitting,window and low foamed pipe,window,window profile etc.

Corresponding Grade
Company
Grade
Huaxing
ZB-530 Series
Kaneka
PA-40 PA-60 PA-600
Rohm & Haas
K-400P
Mit.Rayon
P-530A P-533J
LG Chem
PA-930

Processing Aid for PVC(ZB-401)

Acrylic processing aidfor
LG chem PA828
Kaneka PA21 PA30
Improve process property of rigid PVC product.
Used in pipe,window
Acrylic processing aid for PVC pipe,window
The main function is to improve processing property or rigid PVC product.
Promote fusion.
Reduce process temperature.
Improve the surface quality of the finished product.
Improve the fluidity of heated PVC resin and extrusion speed.
Improve the melt strength.
Improve the prolongation to make the PVC product more homogeneous.
Improve the mechanial strength.

Quality Specification
Item
ZB-401(low viscosity)
ZB-401(ultra high viscosity)
Inherent Viscosity [η], 25
2.0-8.0
12.0-14.0
Bulk Density, g/cm
3
≥
0.35
0.35
Volatile Matter,% ≤
1.0
1.0
Particle Size 0.45mm (40 mesh) passed% ≥
98
98

Corresponding Grade
Company
Grade
Huaxing
ZB-401(low viscosity)
ZB-401(ultra high viscosity)
Kaneka

PA-21 PA-30

Rohm & Haas
K-125P

LG Chem
PA-828

Anionic polyacrylamide Oil recovery

Heat resistant and anti-salt polyacrylamide:
1.Suitable temperature(degree Celsius):65-85
2.Suitable salinity mg/l:8020-32868
1. Product characteristics
the ca series of Polyacrylamide for Oil displacement is developed as the special product of tertiary oil recovery based on the characteristics of oil-displacement mechanism and oil reservoir via the special design of molecule. The product has the characteristics of good heat resistance, salt tolerance viscosity and anti-shearing, etc., which enables to effectively increase the viscosity of displacing fluid in oil reservoir, and also increase the wave and its coefficient, thus to improve the recovery ratio of petroleum.
2. Quality index
Item
CA-45
CA-75-1
CA-75-2
CA-75-3
CA-75-4
Appearance
White grain powder
grain size
less than 0.15mm contents of grain
5.0
Greater than 1.0mm contents of grain
5.0
Solid content (%)
89
Filtration ratio≤
2.0
2.0
2.0
1.5
1.5
Molecular Weight(million)
20-22
20-22
22-24
24-26
26-28
Apparent viscosity mPa.s ≥
10.0
11.5
11.5
12.5
11.0
Suitable temperature °C
65
70
75
80
85
Suitable salinity mg/l
8020
6000
19334
20000
32868
3. Application
It can be used for tertiary recovery auxiliary agent, which can used alone or combined with alkaline surface active agent to constitute binary or ternary combination flooding.
According to different reservoir conditions such as reservoir temperature and salinity, the company can provide the relevant products.
4. Product package
The product is packaged with paper plastic three-in-one compound woven bags, and 25 Kg in each bag or determination in accord with the user’s requirement. Its shelf life is 2 years.
5. Attention
The product is moisture absorbent, thus to protect from damp and moist for conservation. It should be stored at a dry and ventilate storehouse, and not be exposed to air and sunshine.

Processing aid for PVC foam shoes

Foam processing aid
To be used foaming shoes,board,floor,pipe etc
Make pvc product average bubble
Similar with LG PA828
PVC processing aid
It is mainly used to improve the uniformity of the foaming hole,promote fusion and melt,improve the surface quality of the finished product.
When it is used as foaming adjustment agent, it can endow with higher melt strength, better plastication and fluidity,it can have the foamed product keep down well-distributed and dense air bubble,Thus has homogeneous foaming structure.
When it is used as processing aid,it can endow with better surface lustrousness,greatly increase the melt strength.It is particularly suitable for working formulation with high filling.
It is white powder. It can be dissolved in ketone and chloroform,but not in wanter and alcohol.

Quality Specification
Item
ZB-530 Series
Inherent Viscosity [η], 25
6~14
Bulk Density, g/cm
3
0.35~0.45
Volatile Matter,% ≤
1.0
Particle Size 0.45mm (40 mesh) passed% ≥
98

Main application:
To be used in rigid pvc foamed board,pvc fitting,window and low foamed pipe,window,window profile etc.

Corresponding Grade
Company
Grade
Huaxing
ZB-530 Series
Kaneka
PA-40 PA-60 PA-600
Rohm & Haas
K-400P
Mit.Rayon
P-530A P-533J
LG Chem
PA-930

Products AA/AMPS

ISO9001,ISO14000
Biggest AA/AMPS Manufacturer
Export to global market

Properties:
is the copolymer of acrylic acid and 2-acrylanmido-2-methylpropanesulfonic acid (AMPS). Due to including carboxylic group (scale inhibition and dispersion) and sulfonic acid group (strong polarity) in this copolymer, has high calcium tolerance and good scale inhibition for calcium phosphate, calcium carbonate and zinc scale. When built with organophosphines, the synergic effect is obvious. is suitable to be used in water quality of high pH and high alkaline, it is one of the ideal scale inhibitor and dispersant on high concentration index.

Specification:
items
index
Appearance
Colorless or light yellow viscous liquid
Solid content
40% min
Free monomer (as AA)
0.8% max
Density (20C)g/cm
3
1.15 min
pH(1% solution)
3.5-4.5
Viscosity mpa.s
90-200

Usage:
can be used as scale inhibitor and dispersant in open circulating cool water system, oilfield refill water system, metallurgy system and iron & steel plants to prevent sediment of ferric oxide. When built with organophosphorines and zinc salt, the suitable pH value is 7.0~9.5.
can also be used as dyeing auxiliaries for textile.

Package and Storage:
Normally In 250kg net Plastic Drum, IBC drum can also be used as required.

Products of Special Polymer Materials

This product has excellent mechanical properties and physical properties since it is processed and formed by special techniques
Products of Special Polymer Materials
•This product has excellent mechanical properties and physical properties since it is processed and formed by special techniques and a new high performance intensifier for synthetic materials has been added in the raw materials. Polymer materials with special functions are tough and elastic, and are capable of excellent resistance against creep, good geometrical stability, and anti-impact even at low temperatures. Such materials can be used in the development of the new and high-standard enganced precision parts that are light, abrasion resistant and of high specific strength, such as combined switch, brake disc and clutch lining of automobiles, precision gear, bearing, valve and household appliances etc. When used as friction materials in break discs, such materials are capable of preventing the big change in friction coefficient of the break disc, especially during long-time breaking; therefore, efficiency of the break disc can be maintained even when the temperature of the disc rises, which will improve the safety factor, reduce the wearing loss and prolong the service life of the break disc. Compared with friction materials made of asbestos, these materials are not only environment-friendly, but also have better comprehensive performances.
•Polymer plastics with special functions are widely applied in machinery industry, motor industry, electronics & electric appliances, articles for daily use, pipelines & accessories, precision instruments and building materials etc.

Professional Effective Flocculation Cationic PAM

CPAM
1)Chemical auxiliary agent
2)Good water solubility
3)Effective flocculation
4)easily soluble in water
Types and perforrmance index
Technology index
BY-A
BY-B
BY-C
BY-D
BY-E
BY-F
Appearance
White particle or power
Solid(%)
≥89
≥89
≥89
≥89
≥89
≥89
Lon degree (%)
10
20
30
40
50
60
Package and storage
The package is made with 25kg plastic lining woven bags or paper-plastics compound sacks or according to customers’ individualized demands.During storage and transportation, heat and humidity should be prevented specially and it should be borne in mind that the product of dry powder will absorb humidity and agglomeration…The number of stacking layers can’t be more than 20. The effective storage period is 2 years .
Application
Dehydrating silit
According to the featuresof the silit , corresponding brand of the product can be applied to dehydrating the silt effectively before it enters filter press .floc produced in dehydration is big so that it is not sticky to the filtration fabric.No free-running occurs during filter pressing; the dosage is small and the rate of dehydration is high and the humidity content is less than 80% .
Disposal of sewage and organic waste water
The porduct can appear electro-positivity in acid or alkalescence medium , which will have a good effect of clarification to have flocculation deposition to sewage with negatiove charge in the suspended particles, e.g. swege from alcohol plant , beer plant ,monosodium glutamate plat, plant of meat, beverage factory , textile mill, dying plant ,ect .The effect of positive ion polyacrylamide is several times or scores of times better than negative ion polyacrymide, non-ionic polyacrylamide or inorganic salt, because such sewage generally carries negative charge .
Flocculant for water treatmeant in waterworks
The product has advantages of small dosage, good effect ,low cost, ect. it can achieve better effect by combining with abio-flocculant .
Oil Field Chemical
Including clay anti-swelling agent, transfer agent for oilfiled acidification,etc .
Addictives ofr paper making
Positive ion PAM paper intensifier is type of water-solubility positive ion polymer containing carbamic acid and has the function of strengthening , retention, filtration which can improve the strength of paper effectiovely .In addition, the product is also an effectiove dispersant .

Professional Effective Flocculation Cationic PAM

Cationic Polyacrylamide:
1.Fast dissoving speed;
2.industrial treatment and recycling
3.a water soluble macromolecular polyme
Types and perforrmance index
Technology index
BY-A
BY-B
BY-C
BY-D
BY-E
BY-F
Appearance
White particle or power
Solid(%)
≥89
≥89
≥89
≥89
≥89
≥89
Lon degree (%)
10
20
30
40
50
60
Package and storage
The package is made with 25kg plastic lining woven bags or paper-plastics compound sacks or according to customers’ individualized demands.During storage and transportation, heat and humidity should be prevented specially and it should be borne in mind that the product of dry powder will absorb humidity and agglomeration…The number of stacking layers can’t be more than 20. The effective storage period is 2 years .
Application
Dehydrating silit
According to the featuresof the silit , corresponding brand of the product can be applied to dehydrating the silt effectively before it enters filter press .floc produced in dehydration is big so that it is not sticky to the filtration fabric.No free-running occurs during filter pressing; the dosage is small and the rate of dehydration is high and the humidity content is less than 80% .
Disposal of sewage and organic waste water
The porduct can appear electro-positivity in acid or alkalescence medium , which will have a good effect of clarification to have flocculation deposition to sewage with negatiove charge in the suspended particles, e.g. swege from alcohol plant , beer plant ,monosodium glutamate plat, plant of meat, beverage factory , textile mill, dying plant ,ect .The effect of positive ion polyacrylamide is several times or scores of times better than negative ion polyacrymide, non-ionic polyacrylamide or inorganic salt, because such sewage generally carries negative charge .
Flocculant for water treatmeant in waterworks
The product has advantages of small dosage, good effect ,low cost, ect. it can achieve better effect by combining with abio-flocculant .
Oil Field Chemical
Including clay anti-swelling agent, transfer agent for oilfiled acidification,etc .
Addictives ofr paper making
Positive ion PAM paper intensifier is type of water-solubility positive ion polymer containing carbamic acid and has the function of strengthening , retention, filtration which can improve the strength of paper effectiovely .In addition, the product is also an effectiove dispersant .

Professional Effective Flocculation Cationic PAM

Cationic PAM:
1.water treatment chemicals
2.used in paper making industry
3.used in mining industry
4.white granule powder
Types and perforrmance index
Technology index
BY-A
BY-B
BY-C
BY-D
BY-E
BY-F
Appearance
White particle or power
Solid(%)
≥89
≥89
≥89
≥89
≥89
≥89
Lon degree (%)
10
20
30
40
50
60
Package and storage
The package is made with 25kg plastic lining woven bags or paper-plastics compound sacks or according to customers’ individualized demands.During storage and transportation, heat and humidity should be prevented specially and it should be borne in mind that the product of dry powder will absorb humidity and agglomeration…The number of stacking layers can’t be more than 20. The effective storage period is 2 years .
Application
Dehydrating silit
According to the featuresof the silit , corresponding brand of the product can be applied to dehydrating the silt effectively before it enters filter press .floc produced in dehydration is big so that it is not sticky to the filtration fabric.No free-running occurs during filter pressing; the dosage is small and the rate of dehydration is high and the humidity content is less than 80% .
Disposal of sewage and organic waste water
The porduct can appear electro-positivity in acid or alkalescence medium , which will have a good effect of clarification to have flocculation deposition to sewage with negatiove charge in the suspended particles, e.g. swege from alcohol plant , beer plant ,monosodium glutamate plat, plant of meat, beverage factory , textile mill, dying plant ,ect .The effect of positive ion polyacrylamide is several times or scores of times better than negative ion polyacrymide, non-ionic polyacrylamide or inorganic salt, because such sewage generally carries negative charge .
Flocculant for water treatmeant in waterworks
The product has advantages of small dosage, good effect ,low cost, ect. it can achieve better effect by combining with abio-flocculant .
Oil Field Chemical
Including clay anti-swelling agent, transfer agent for oilfiled acidification,etc .
Addictives ofr paper making
Positive ion PAM paper intensifier is type of water-solubility positive ion polymer containing carbamic acid and has the function of strengthening , retention, filtration which can improve the strength of paper effectiovely .In addition, the product is also an effectiove dispersant .

Professional Effective Flocculation Cationic PAM

CPAM:
1.water treatment chemicals
2.used in paper making industry
3.used in mining industry
Types and perforrmance index
Technology index
BY-A
BY-B
BY-C
BY-D
BY-E
BY-F
Appearance
White particle or power
Solid(%)
≥89
≥89
≥89
≥89
≥89
≥89
Lon degree (%)
10
20
30
40
50
60
Package and storage
The package is made with 25kg plastic lining woven bags or paper-plastics compound sacks or according to customers’ individualized demands.During storage and transportation, heat and humidity should be prevented specially and it should be borne in mind that the product of dry powder will absorb humidity and agglomeration…The number of stacking layers can’t be more than 20. The effective storage period is 2 years .
Application
Dehydrating silit
According to the featuresof the silit , corresponding brand of the product can be applied to dehydrating the silt effectively before it enters filter press .floc produced in dehydration is big so that it is not sticky to the filtration fabric.No free-running occurs during filter pressing; the dosage is small and the rate of dehydration is high and the humidity content is less than 80% .
Disposal of sewage and organic waste water
The porduct can appear electro-positivity in acid or alkalescence medium , which will have a good effect of clarification to have flocculation deposition to sewage with negatiove charge in the suspended particles, e.g. swege from alcohol plant , beer plant ,monosodium glutamate plat, plant of meat, beverage factory , textile mill, dying plant ,ect .The effect of positive ion polyacrylamide is several times or scores of times better than negative ion polyacrymide, non-ionic polyacrylamide or inorganic salt, because such sewage generally carries negative charge .
Flocculant for water treatmeant in waterworks
The product has advantages of small dosage, good effect ,low cost, ect. it can achieve better effect by combining with abio-flocculant .
Oil Field Chemical
Including clay anti-swelling agent, transfer agent for oilfiled acidification,etc .
Addictives ofr paper making
Positive ion PAM paper intensifier is type of water-solubility positive ion polymer containing carbamic acid and has the function of strengthening , retention, filtration which can improve the strength of paper effectiovely .In addition, the product is also an effectiove dispersant .

Professional Effective Flocculation Cationic PAM

Cationic POLYACRYLAMIDE
1)White particle
2)Chemical auxiliary agent
3)Good water solubility
4)Effective flocculation
Use:
(1) Industrial waste water treatment:

For the neutral or alkaline waste water with pH value of 7-14, large suspended particles and ions of positive charge, it has the best treating effect, such as the waste water from iron industry, electroplating factory, metallurgical industry, coal washing, etc..

(2) Drinking water treatment:
When the drinking water still does not meet the standard after the treatment of the precipitation and filtering, then the APAM can be used as the flocculant. Its dosage is 2%-5% of that of the inorganic flocculants, but the effect of former is dozens of times of that of latter.

(3) It can be used for the recycling of the loss of brewers' grains in the alcohol plant and starch in the starch factory.

(4) It can be used as the water block agent in the oil field, and also the oil-displacing agent during the tertiary recovery.

(5) It can be applied in the paper-making industry. It can be used as the dispersant, retention aid, etc. in the long fiber paper-making, and also the flocculant for the waste water from the paper-making.

Molecular weight (million)
18-25
15-17
10-14
8-10
6-8
4-5
Solid content (%)
≥90
≥90
≥90
≥90
≥90
≥90
Hydrolysis degree (%)
20-30
15-30
15-30
10-30
8-15
8-10
Residual
monomer (%)
0.05-0.1
0.05-0.1
0.05-0.1
0.05-0.1
0.05-0.1
0.05-0.1
Effective pH value
7-14
7-14
7-14
7-14
7-14
7-14
Appearance
White powder/granule

Professional Supplier powder Polycarboxylate Ether

Polycarboxylate/PCE
1)super water reducer
2)high plasticizer rate
3)good strength increasing
4)good durability
Basic

Information
Cas no. :70879-60-6
Appearance:Light yellow powder
Dosage : 0.2g/100g of cement

superplasticizer
Mainly used for various high-strength concrete, steel concrete, prestressed concrete, large formwork concrete, slip forming concrete concrete performance ,high water reduction , environmental no toxicity ,no odor , no flammable .Long-term storage without crystallization. Packaging: powder: 25kg sealed bag or drum.liquid: 1000kg IBC tankStoring: the powder is easy to absorb moisture in the air and protect it in sealed bag.Storage period: 12 month.
Items
Standard
Appearance
Light yellow powder
Density at 23C,
510±10kg/m3
PH(20% water solution)
9.0±0.5
Solids,(%
98.0±1.0
C1-,%

≤0.10
Na2SO4,%

≤4.0
Na2O+0.658K2O,%

≤5.0
Solubility
VerySoluble
Performance
Dosages for P.O.42.5 Standard Cement (wt% of cement): 0.18~0.22
Cement Paste Flow
(mm)
≥240
Water Reducing of Mortar
≥20

Prominent Polyacrylamide/PAM chemical pharmaceutical

1.Polyacrylamide purity 90% min
2.Anionic Polyacrylamide
3.white granule
4.M.W.: 5 - 25million minimum
5.Monomer free: 0.05
polyacrylamide /PAM

usages:
1 as a coagulant in water treatment, flocculation, sludge dewatering agent.
2 for oil drilling in the precipitation agent, displacing agent
3 PAM also widely used in thickening, colloidal stability, drag reduction, bond, film, biomedical materials, etc.

physical properties:
The physical properties of polyacrylamide mainly depends on the behaviour in aqueous solution. Because of molecules chain gene containing amide groups or ions gene, the distinguishing feature is highly hydrophilic, and it can be dissolved in water in various proportions, and polyacrylamide aqueous solution on the electrolyte has a good tolerance, such as it is not sensitive with ammonium chloride, sodium sulfate, , and compatible.with surface active agents

Chemical reaction:
The pendant group of polyacrylamide chains is lively acylamino , chemical reactions can occur on a variety of derivatives can be obtained, but for the effect of neighboring genes, the reaction often can not be fully carried out.

Anion polyacrylamide specifications
:
Item
C1610
C1620
C1635
C1650
Ion content
low
middle
middle
high
Molecular weight
(per 10 thousand)
1000-1200
1000-1200
800-1000
800-1000
Solid content
Min 90%
Min 90%
Min 90%
Min 90%
Free Monomer
Max 0.05%
Max 0.05%
Max 0.05%
Max 0.05%
Dissolution time
Max 40
Max 40
Max 40
Max 40

Cationic polyacrylamide specifications
:
Item
Data
Molecular weight(per 10 thousands)
800-1000
1000-1200
1300-1500
1600-2000
Appearance
White granules
Ion content
25-45
45-55
55-60
65-75
Solid content
88±2%
88±2%
88±2%
88±2%
Hydrolysis degree
20-30%
20-30%
20-30%
20-30%
Residual monomer
Max 0.05%
Max 0.05%
Max 0.05%
Max 0.05%
Dissolution time
Max 2h
Max 2h
Max 2h
Max 2h

001x7 Strong Acid Cation Resin

001x7 Strong Acid Cation Exchange Resin
Cation Exchange Resin for Desalination
Small order accepted
prompt delivery

Appearance
Strongly Acid Cation Exchange Resin are widely used for hard water softening, preparation of water, hydrometallurgy, rare metals seperation, extraction of antibiotics, drug purification, sugar desalination, waste water treatment. amino acid recycling, and as dehydrating agent and catalysts.

Specification
NO.
ITEM
SPEC
1
Type
Strongly acidic
2
Matrix
Polystyrene
3
Function group
-SO
3
-
4
Ionic form
Na
+
5
Moisture content (%)
45-50
6
Quality Total Exchange Capacity (mmol/g)
≥4.5
7
Total exchange capacity (mmol/ml)
≥1.9
8
Defined Shear Rate (%)
≥92
9
Bulk Density (g/ml)
0.77-0.87
10
True Density (g/ml)
1.25-1.29
11
Particle Size Range (%)
0.315-1.25 mm≥95

Comparison:

Bayer S100LF Rohm & Haas SR1L

Purolite C100E Dow Dowex HCR--S(E)S

Packing
1.

PE bag (25liters)

2. PE valve bag (25liters)

Contact
Tel:0086-351-3343082
fax:0086-351-3343281

Anionic polyacrylamide PAM

Anionic PAM
1.Oil displacing agent of oil field tertiary oil recovery
2.Well drilling mud raw material
Anionic polyacrylamide (Anionic PAM)
Technical Indicators
Performance Indicators of Anionic-polyacrylamide: (Enterprise Standard: Q/AJC002-2006)

Molecular Weight (million)
Degree of Hydrolysis
Solid Content%
Effective PH Range
Residual Monomer Content%
20-30 (adjustable)
35-45 (adjustable)
>=90%
5-14
<=0.05
18-26 (adjustable)
30-40 (adjustable)
15-25(adjustable)
25-35 (adjustable)
10-20 (adjustable)
15-30 (adjustable)
8-20 (adjustable)
10-25(adjustable)
5-16 (adjustable)
6-20 (adjustable)
5-15 (adjustable)
6-15 (adjustable)

Anionic polyacrylamide (APAM)
Main Application
Anionic PAM: Oil-displacing agent of oil field tertiary oil recovery:
It can adjust the rheology of filled water, increase the viscosity of driving liquid, improve water drive wave and efficiency, lower water phase permeability in ground layer, and enable water and oil to flow forward at even speed. Its effect is that it is mainly used in tertiary oil recovery of oil fields in the aspect oil production, and raw oil of about 100 to 150ton more can be produced through filling the macromolecule polyacrylamide product one ton.
Anionic PAM: Well drilling mud raw materials:
in oil field exploration and development and exploration of geology, water and coal, it is used as adhesive of well drilling mud raw materials, can improve the service life of drill bits, improve the drill speed and drilling footage, and reduce plug in replacing drill, and has prominent well slough preventing effect, and it can be used as fracturing fluid of oil fields or plugging agent of controlling profile and plugging water.
Anionic PAM: Industrial Waste Water Treatment:
It has the best effect in particular in processing sewage water with suspended particulate, thicker size, high concentration, positive charge particle, neutral or alkalescence water PH value, waste water of iron and steel plants, waste water of electroplating factory, metallurgy waste water, coal washing waste water and other waste water.
Anionic PAM: Drinking Water Treatment:
Water sources of many tap water factories in China come from rivers, the sand and mineral contents are higher, water is muddy, the water still can not achieve demands although passing through sedimentation and filtration, and flocculating agent needs adding; however huge adding amount generates increased mud amount and bad effect. The adding amount is only 1/50 of inorganic flocculating agent if anionic-polyacrylamide is adopted as flocculating agent, but the effect is several times better than the organic flocculating agent, and even dozens of times. If the river water with severe organic matter pollution can be matched with anionic-polyacrylamide for use, the effect will be better.
Anionic PAM: Paper-making adhesive:
The product can be used as fining agent, residency agent, filtration aid and paper dry and wet intensity reinforcing agent in paper-making industry.

Protecting Environment Anionic Polyacrylamid

Anionic Polyacrylamide|PAM
1)Could add ion for the spcial function
2)ISO 9001 certificate
3)Competitive price
Anionic Polyacrylamide|PAM
Use:
(1) Industrial waste water treatment:
For the neutral or alkaline waste water with pH value of 7-14, large suspended particles and ions of positive charge, it has the best treating effect, such as the waste water from iron industry, electroplating factory, metallurgical industry, coal washing, etc..

(2) Drinking water treatment:
When the drinking water still does not meet the standard after the treatment of the precipitation and filtering, then the APAM can be used as the flocculant. Its dosage is 2%-5% of that of the inorganic flocculants, but the effect of former is dozens of times of that of latter.

(3) It can be used for the recycling of the loss of brewers' grains in the alcohol plant and starch in the starch factory.

(4) It can be used as the water block agent in the oil field, and also the oil-displacing agent during the tertiary recovery.

(5) It can be applied in the paper-making industry. It can be used as the dispersant, retention aid, etc. in the long fiber paper-making, and also the flocculant for the waste water from the paper-making.

Molecular weight (million)
18-25
15-17
10-14
8-10
6-8
4-5
Solid content (%)
≥90
≥90
≥90
≥90
≥90
≥90
Hydrolysis degree (%)
20-30
15-30
15-30
10-30
8-15
8-10
Residual
monomer (%)
0.05-0.1
0.05-0.1
0.05-0.1
0.05-0.1
0.05-0.1
0.05-0.1
Effective pH value
7-14
7-14
7-14
7-14
7-14
7-14
Appearance
White powder/granule
PACKAGE:
25kg/plastic enhanced paper bags with inner plastic bag, 25kg/PE bag

Provide PVC Resin

Packaging Detail: 25kg PP bags
Delivery Detail in two weeks after order

Polyvinyl chloride can be abbreviated to PVC.

It is a kind of thermoplastic plastic. It is white powder. Our companyproduces PVC by suspension method and polymerization technique.

On customers' requirements, we can produceSG-3 and SG-5 common PVC and special PVC with low polymerization degree. PVC resin has a wide range ofapplication. SG-3 is used in producing electrical insulating materials,agricultural film, daily-use plastic products,,SG-5 is used in producing transparent products section bar, hard tube and decorative materials. Quality standard is GB/T5761-1993.

Quality standard of polyvinyl chloride resin GB/T5761-1993

Provide New high-temp-resistance & high mineralization polymer TS-85

1.PAM is white granule;
2.Have strong flocculation effect
3.Water treatment chemicals
Property New high-temp-resistance & high mineralization polymer TS-85 and application
TS-85 polymer is mainly applied to about 65°C oil miner with 20000-35000ppm mineralization. The south oilfields of Shengli are typical. It largely expend the using real, of polymerization flooding.
New high-temp-resistance & high mineralization polymer TS-85 Technical index
Item
index
TS-85
appearance
White powder
Mesh
≥1mm≤5%≤0.2mm≤5%
Solid content (%)
≥88
Dissolving time (hour)
≤2
Insoluble matter in (%)
≤0.2
Degree of hydrolysis (%)
23-27
Residual monomer (%)
≤0.05
Filtration factor
≤1.5
Apparent viscosity (mpa.s)
(Concentration 1500mg/L)
Mineralization 32868ppm
Temp.85°C, Rev 30r/min.
≥11.5
according to the Dagang petrol bureau standard and our standard Q/WZ2000-005
New high-temp-resistance & high mineralization polymer TS-85 Packing and storage
The product is packaged in polyethylene kraft with plastic bag. 25kg per bag.
It should stored in draughty, dry place which avoid moisture, drenching.

Pure PTFE, PTFE Filler Compound, PTFE Micro Powder

Features:
1) Pure PTFE includes M81 and M82 for some PTFE products
2) PTFE filler compound includ
Features:1) Pure PTFE includes M81 and M82 for some PTFE products 2) PTFE filler compound includes many kinds of items, for example, filled 15-35% glass fiber, carbon fiber, graphite, carbon powder, glass fiber and MS2 3) PTFE micro powder: lubricant powder, LUB5, LUB304) Sintered PTFE: EG1 and EG2 for extrusion

Pure acyclic resin

1. styrene acrylic polymer, esepecially for primer-sealer
2. stronge adhesion and excellent water resistance

BATF SYNTHETIC LATEX RS-305
Styrene & acrylic emulsion for primer paint

INTRODUCTION:
RS-305,a type of styrene & acrylic emulsion with small particle size and suitable viscosity, its flexible film has strong adhesion and closeness to basement of wall and excellent water resistance .

Due to excellent property in freeze-thaw, mechanical and calcium ion stability, RS-305 can widely use for interior and exterior wall as primer sealer paint.

TYPICAL CHARACTER:

Type-----------------------------Styrene & acrylic copolymer
Appearance---------------------White with blue luster emulsion
Brookfield viscosity(25,3
rd
12r/m)----------1000~4000cps
PH-Value(25
o
C) --------------------------------------8 ± 1
Solid content--------------------------------------48±1%
Particle size---------------------------------------0.1-0.2µm
Ionicity-----------------------------------------------Anionic

STORAGE:
Store in airtight container and avoid cold or high temperature. Suggestive normal storage temperature is 10-35
o
C. Period of validity is six months after the packing date.

NOTICES:

Specific suggestion of working procedures and formula can be provided only after knowing customer product applications and production facilities. Please consult our BATF representative for more details.

PurePhenolic Resin For Refractory

we manufacture refractory material phenolic resin,foundry(coated sand)phenolic resin,brake pad and lining resin
Product description
The thermoseeting solid resin is formed by reaction adopting complex activator system,and it’s pure phenol and formaldehyde resin used for producing top-grade refractory material(magnesium carbon brick,sliding gate,sliding panel and tundish )with good bonding strength under normal temperature and high residual carbon quantity,refractory high temperature. It doesn’t need to add curing agent when using this resin.The warranty period is half a year.
Technical Index
Model
Appearance
Moisture
Residualcarbon(%)
AggregationSpeed(s)
FreePhenol(%)
Pfn4301
Whiteor yellow po powder
≤1.0
60-68
50-70
≤2.0

Purex C150-R ion exchange resin

High exchange capacity
High mechanical strength
Uniform particle
Private-label and OEM services available
Purex C150 Strong acid polystyrene type cation resin

Purex C150 is a strong acid polystyrene gel type cation resin. It has:
l High exchange capacity
l High mechanical strength
l Uniform particle with good hydraulics characteristic
l Good selectivity
l Good thermotolerant characteristic
l Excellent physical and chemical stability

Specification:
Polymer structureStyren-DVB
Functional group----------HSO
3
Appearance-------Light brown bead
Ionic form --------------------------Na
+
type
Total exchange capacity-----------------------≥4.5 mmol/g(dry) Na
+
type
Total exchange capacity--------------------≥1.9 mmol/ml Na
+
type
Moisture content-------46-50% Na
+
type
Density------------1.25-1.29 g/ml Na
+
type
Shipping weight--------------0.77-0.87 g/ml Na
+
type
Particle size--------0.315-1.25 mm ≥95%
<0.315 mm ≤1%
Effective particle size0.40-0.60 mm
Uniformity coefficient≤1.7
Attrition rate-----------------------------------≥90%
Swell, Max.------------------------------Na
+
-

H
+
10%

Recommended operation parameters
Operating temperature, Max. 120
o
C
Bed depth, Min. 800 mm
Service flow rate 5-25BV
*
/h
Service flow rate, Max.40 m/h
Regenerant --NaCl HCl H
2
SO
4
Consumption as 100%80-220g/l 50-150g/l 80-240g/l
Concentration 5-10% 5-8% 0.7-6%
Flow rate 2-8 BV
*
/h 2-5 BV
*
/h 2-20 BV
*
/h
Contact time, Min30 min
Slow rinse --2 BV
*
Regeneration flow
Fast rinse 4-8BV
*
Service flow

Note1 BV=1 m
3

media/1m
3

resin.
All above data are for your reference. Please adjust according to your equipment and operation condition.

We are looking forward to your futher questions or comments.
Thank you!

PuroLite A500 resin

Quality assurance of PuroLite
Long service life
Purolite® A500
Save or Print
Macroporous Type I Strong Base Anion Exchange Resin
Purolite A500
is a premium quality strongly basic Type I, macroporous anion exchange resin with an isoporous structure that contributes to its high capacity.
Purolite A500
will provide for optimum performance in deionization and as an organic trap.
BASIC FEATURES:

Application
-
Demineralization - Good Silica Removal
Polymer Structure
-
Macroporous polystyrene crosslinked with divinylbenzene
Appearance
-
Spherical beads
Functional Group
-
Type 1 Quaternary Ammonium
Ionic Form as Shipped
-
Cl
-

PuroLite C100E ion exchange resin

Quality assurance of PuroLite
Long service life
Gel Type Strong Acid Cation Exchange Resin
Purolite C100E is a high purity premium grade bead form conventional gel polystyrene sulphonate cation exchange resin designed expressly for the treatment of foodstuffs, beverages, potable waters, and water used in the processing of food. Its specification is such that it will exceed the relevant EEC requirements, and the resin is in compliance with the U.S. Food & Drug PRODUCT DESCRIPTION Administration Code of Federal Regulations section 21, paragraph 173.25; for use in the treatment of foods for human consumption. Its high bead integrity, excellent chemical and physical stability, and very low extractibles content play a large part in its successful employment in these areas.
Basic Features:
Application

Domestic/Industrial/Food grade softening
Polymer Structure

Gel polystyrene crosslinked with divinylbenzene
Appearance

Spherical beads
Functional Group

Sulphonic acid
Ionic form as shipped

Na
+
Typical Physical and Chemical Characteristics:
Total Capacity (min.)
Na
+
1.90 eq/l
Total Capacity (min.)
Na
+
41.48 kGr/ft
3
Moisture Retention
Na
+
46-50 %
Mean Size Typical

0.60-0.85 mm
Uniformity Coefficient (max.)

1.70
Reversible Swelling (max.)
Na
+
→ H
+
10 %
Reversible Swelling (max.)
Ca2
+
→ Na
+
8 %
Specific Gravity

1.27 g/ml
Shipping Weight (approx.)

800-840 g/l
Shipping Weight (approx.)

50-52.5 lbs/ft
3
Temp Limit
H
+
120
Temp Limit
H
+
250
Temp Limit
Na
+
140
Temp Limit
Na
+
285
pH Limits

0-14

We are looking forward to your futher questions or comments.
Thank you!

Purolite / resin

Purolite / resin
resin
Purolite Gel Type Strong Acid Cation Exchange Resin
Model:C100E
Purolite Gel Type Strong Acid Cation Exchange Resin
ModelC100E
Purolite C100E is a high purity premium grade bead form conventional gel polystyrene sulphonate cation exchange resin designed expressly for the treatment of foodstuffs, beverages, potable waters, and water used in the processing of food. Its specification is such that it will exceed the relevant EEC requirements, and the resin is in compliance with the U.S. Food & Drug PRODUCT DESCRIPTION Administration Code of Federal Regulations section 21, paragraph 173.25; for use in the treatment of foods for human consumption. Its high bead integrity, excellent chemical and physical stability, and very low extractibles content play a large part in its successful employment in these areas.
Basic Features:
Application
Domestic/Industrial/Food grade softening
Polymer Structure
Gel polystyrene crosslinked with divinylbenzene
Appearance
Spherical beads
Functional Group
Sulphonic acid
Ionic form as shipped
Na
+

Anionic polyacrylamide as dispersant agent

dispersant agent A3020P:
1.Molecular Weight:19-23million
2.Surface viscosity:11-15cps
3.insolubility:<0.13%
Anionic polyacrylamide paper dispersant agent:
Describe:
The best quality products in China, used as paper dispersant agnet.
Index:
Molecular Weight(Miliion)
20-23
Solid Content%
>89
Anionic Degree(Mole) %
20-25
Filtration ratio≤
2.0
Apparent viscosity mPa.s
11-14
Product package:
The product is packaged with paper plastic three-in-one compound woven bags, and 25 Kg in each bag or determination in accord with the user’s requirement. Its shelf life is 2 years.
Attention:
The product is moisture absorbent, thus to protect from damp and moist for conservation. It should be stored at a dry and ventilate storehouse, and not be exposed to air and sunshine.

Pva resin

1,PVA resin is widely used in adhesive,paint,coating,
2,modified cement,textile and process paper etc.copolymer..
PVA resin
1.PVA resin is vinyl acetate/ethylene copolymer emulsion which is a kind of adhesive with excellent performance. Compared to PVAC emulsion ,the flexility,weather-resistance and waterproofing of VAE copolymer have been largely improved.
2.The VAE emulsion of hanwei brand has permanent flexility/well acidity-alkaline resistance and excellent solubility.It doesn't lead to agglomeration phenomenon when mixed with most of additive\pigment and filler;It can also mix directly with many water-based low-molecular and macrololecule .Meanwhile ,Our VAE emulsion is UV-resistance and excellent film-forming.Our product is non-toxic and tasteless,pollution-free,completely be in line with mordern environmental requirement.
3.VAE emulsion is widely used in adhesive , paint ,coating, modified cement , textile and process paper and so on.This kind of product belong to water-based adhesive,it has passed FDA(Food And Drug Management Department Of Ameria) certification,therefore,it can use as adhesive in food package.
Relevant Parameter Of Product
Product specifications
HWE_10
HWE-17
HWE-18
HWE-56
HWE-70
Solid Cotent%
56±2
56±2
56±2
60±2
50±2
Cotent of Ethylene
16±2
23±2
26±2
12±2
35±2
Viscositympa.s)
3000±750
2500±500
3500±750
3000±750
≤1000
PH value
5.0±1
5.0±1
5.0±1
5.0±1
5.0±1
Glass Transition (Tg)/
8±3
10±3
0±3
11±3
18±3
particle size(um)
0.8
0.9
0.8
0.8
0.9
ResiduesWt%)
≤0.3
≤0.3
≤0.3
≤0.3
≤0.3
Minium film-forming temperature
0
0
0
0
0

Pvc Impact modifier CPE 135A

1. CPE manufacture
2. chlorinated polyethylene with high quanlity
3. CPE for pvc impact modifier
4. CPE135A & CPE135B

Chlorinated Polyethylene for PVC impact modifier
CPE 135A

SPECIFICATIONS:

ITEM
UNIT
INDEX
Chlorine content
%
35±2
Thermal decomposition temperature
°C
≥170
Volatile Matter content
%
≤0.4
Remains crystallinity
%
≤ 2
Tensile strength
Mpa
≥8.0
Rate of filtration (36mesh)
%
≥98
Shore Hardness A
°
≤63
Impurity Particle
pc/100g
≤50
WhitenessE457
°
≥86
Apparent density
g/ml
≥0.55
*Light calcium carbonate content
5%

Features:

1) Good anti-aging property and excellent weatherability. It could be used under harsh climate and environment. And it is fully resistant to ozone.
2) Good anti-combustion, no self ignition.
3) Good low temperature flexibility. It could remain flexible under –20. It may be used as impact modifier in UPVC product.
4) Excellent endurances to chemicals. It is inert to many chemical reagents and corrosion resistant to various acids and alkalis.
5) Good processing ability. It is easy to be shaped.
6) Extremely safe for operation. CPE is harmless to human body and the environment.
7) Excellent stability.

Contacter:
Steven Han

Sales Manager
Qingdao Xiangsheng Chemical Technology Co., ltd.
Add: A-2509, Top Yihe International, No.10, Hongkong Middle Road, Qingdao.
Tel.: 0086 532 85039257 Fax: 0086 532 85039258

Wednesday, June 29, 2011

Pvc Resin

pvc resin for cable industries

Description : PVC RESIN
Application : cable jacket

ITEMS
SPECIFICATIONS
PACKING
Average polymerization degree:
Impurity particle number/100g
Volatile matter
Bulk density g/ml
0.35mm mesh residue
Fish eyes number/100cm2
Plasticizer absorbent g/100g
Initial whiteness
Whiteness(160°C, 10min)
VCM residuals ug/g
K Value
1030+/-50
50 max
0.3% max
0.53+/-0.03
0.1% max
5 max
20min
90% min
78% min
1 max
66 - 68

Packing in 25kg PP/ kraft paper.

Packing in 600kg jumbo bag

Packing in 1200kg

For more requirement ,welcome to contact with me directly .Tx .

QE 801 special concentrated white masterbatch

First manufacture various master batch, macromolecule special additive of plastic and function modified material professionally!
QE801 special concentrated white master batch

Item
QE 801
Application
Polyolefin resin
Heat endurance
≤300ºC
Weathering (level)
4-5
Light fastness (level)
7-8
Migration resistance (level)
4-5
chromatic aberrationE
≤1
Application ratio
injection 1%, blowing 2-5%
processing method
extruding, injection
Tinting strength
95105
Standard
GB 9687-1988
QB 1648-92

QE801 is the total dispersibility masterbatch to applied lastest pigment pretreatment technology, there have 70% TiO2. They have Better hiding power, dispersibility, flowability and tinting strength, all ingredients are accepted by Chinese State Food and Health Agency, they contact with foodstuff directly.
Application: Mainly used for lipuid packing film ( milk packing ), stretch ( sanitary towel packing ), punching film, injection, blowing, co-extruding, hollow etc.
Feature:
1. Sanitary performance meet the Standard of GB 9687-1988;
2. The highest temperature up to 300;
3. Excellent dispersibility, no pigmentosa of bigger than 0.03mm, less than 1.5 pigmentosas of less than 0.03mm;
4. Delay yellowness time;
5. Print multi layers films with good surface smoothess and glossy.

MOQ: 0.5t
Packing: 25kg per paper and plastic syntactic bag
Storage: It should be stored in a dry, ventilative, lucifugal place.
Recommended storage life: up to 2 years provided it is stored as directed.

QLS-204

use for fire retardant,surface treating agent,release agent,antifoaming agent
Appearance:light yellow to yellow brown oily liquid
Kinematic viscosity(25°c),mm
2
/s:60~150
oil content,

%:»

70

PH

Value:6~8

QS-1050P

QS-1050P PVC RESIN
Manufacture:QILU PETROCHEMICAL CO.,LTD
Average polymerization degree1000~1100
(or K value)66-68

QS-1050P PVC RESIN
Manufacture:QILU PETROCHEMICAL CO.,LTD
Average polymerization degree
1000~1100
or K value
66-68
Volatile matter(include water) quality score / ≤
0.3%
Bulk density/g/ml≥
0.51~0.57
Screening material quality score /
0.35mm mesh ≤
0.1%
Quantity for the fisheyes(amout/100cm
2
) ≤
5
Initial whiteness ≥
90%
Whiteness (160,10min)/% ≥
80
VCM residuals ug/g ≤
5
Package
Packing in 25kg pp/kraft paper bag

Quality 98% HEC from manufacturer

1. 20 years experience in cellulose ether area
2. EU standard lab
3. Experts from Austin, USA for technical support & PD
HEC from the manufacturer with 20 years experience, is used as a crucial additive for building materials
HEC Hydroxy Ethyl Cellulose

What it is:

GinShiCelare types of cellulosederivatives known as cellulose ethers,specifically Methyl Cellulose(MC), Hydroxy Propyl Methyl Cellulose(HPMC), Hydroxyethyl Cellulose(HEC), and Hydroxy Ethyl MethylCellulose (HEMC) made by steps below:
Soak the pure cellulose (purified cotton / wood pulp) in an aqueous caustic soda and organic solvent mix.
React the resultant alkaline cellulose with etherifying agents, such as alkyl halides or alkylene oxides,
Recover the solvents and wash the product,
Dry and mill the ethereified product.
What it does:

GinShiCelcelluloseethers provides thickening power, water retention ability,consistencydevelopment, suspension power, emulsion development,protective colloid,film formation, lubrication, solutionstabilization, and various otherfunctions.

How it functions:

Uponeachcellulose ether molecule are the cellulose chain, and the ethergroup,such as the methoxy, the hydroxypropoxy, the hydroxyethoxygroups. Themethoxy group, hydroxyethoxy group, and hydroxypropoxygroups act aswater gatherers, although their ability to gather watervary greatly bytype and number. These water gatherers, which areattached to aentangled backbone of cellulose chain, form a temporarybond between thewater molecule and itself. In doing so, water isphysically trapped bythis cellulose ether molecule. Thus, thewaterborne particles which aredissolved in water is also trapped, byvirtue of the flexible butentangled nature of the cellulose chain.This way, water is in effectretained, and emulsion and suspension isachieved, and because of thefriction force needed to smooth thecellulose chain, the solution isthickened, and pseudoplasticity is achieved.

How it is used :

GinShiCelapplicationsare primarily focused on building materials and paints,although it hasa wide range of industrial applications including, not limited to:
Building material
Paint
Oil field operations
Coatings
Leather making
Ceramics
Agriculture
PVC
Building material usages:
Plasters, Renders, & Stucco:
Base plasters
Decorative Finish Plasters
Repair Plasters
Insulating Renders
Adhesives:
Tile Adhesives
EIFS Adhesives
Wallpaper Adhesives
Jointing & Filling Compounds:
Self-leveling compounds
EIFS leveling compounds
Wall leveling compounds
Grouts
Special Applications:
Underwater Concrete
Extruded Construction Elements
Paint Removers

Quality CPVC Manufacture

1. Chlorinated PVC
2. Usage: CPVC paint, UPVC adhesive, CPVC fire resistant coating, leather
Brighther
3. CPVC manufacture
Properties:
It is made from PVC resin chlorinated by chlorine gas in solvent surrounding. It can offer good solubility, good electrical insulation, thermoplasticity anf membrane forming capacity. It can offer good chemical stability, it can resist corrosion and water, it can be dissolved in acetone, hydrochloric ether, arene, ester and some alcohol.
Usage: Special CPVC paint, UPVC adhesive, CPVC fire retardant coating, leather brightener, plastic toy.
Packing & storage: 20kg in plastic bag lined with polythene film bag; In
Cool, dry, airiness place, avoid insolation & moist.
Quality standard:
White / slightly tint loose powder/particle; Standard: Hg2002-91

NO.
ITEMS
UNIT
JH-C65
JH-C64
JH-C63
JH-C61
1
Granularity (40 mesh)
%
≥ 98
≥ 98
≥ 98
≥ 98
2
Volatile Matter content
%
≤ 0.3
≤ 0.3
≤ 0.3
≤ 0.3
3
Chlorine content
%
65-68
64-65
63-64
61-62
4
Absolute viscosity
CP
1.3-1.6
1.3-1.6
1.3-1.4
1.3-1.5
5
Thermal decomposition temperature
° C
≥ 110
≥ 110
≥ 110
≥ 110
6
Heat stability time
S
≥ 40
≥ 40
≥ 40
≥ 40
7
Oil-absorb ratio
%
≥ 20
≥ 25
≥ 30
≥ 30

Quality Cellulose Ether For Building Materials

1.20 years of experience in cellulose ether area
2.EU standard lab
3.Reach certificate available
4. Experts from USA for PD
HPMC from the manufacturer with 20 years experience, is used as a crucial additive for building materials ,meets various demands
HPMC

What it is:

GinShiCelare types of cellulosederivatives known as cellulose ethers,specifically Methyl Cellulose(MC), Hydroxy Propyl Methyl Cellulose(HPMC), Hydroxyethyl Cellulose(HEC), and Hydroxy Ethyl MethylCellulose (HEMC) made by steps below:
Soak the pure cellulose (purified cotton / wood pulp) in an aqueous caustic soda and organic solvent mix.
React the resultant alkaline cellulose with etherifying agents, such as alkyl halides or alkylene oxides,
Recover the solvents and wash the product,
Dry and mill the ethereified product.
What it does:

GinShiCelcelluloseethers provides thickening power, water retention ability,consistencydevelopment, suspension power, emulsion development,protective colloid,film formation, lubrication, solutionstabilization, and various otherfunctions.

How it functions:

Uponeachcellulose ether molecule are the cellulose chain, and the ethergroup,such as the methoxy, the hydroxypropoxy, the hydroxyethoxygroups. Themethoxy group, hydroxyethoxy group, and hydroxypropoxygroups act aswater gatherers, although their ability to gather watervary greatly bytype and number. These water gatherers, which areattached to aentangled backbone of cellulose chain, form a temporarybond between thewater molecule and itself. In doing so, water isphysically trapped bythis cellulose ether molecule. Thus, thewaterborne particles which aredissolved in water is also trapped, byvirtue of the flexible butentangled nature of the cellulose chain.This way, water is in effectretained, and emulsion and suspension isachieved, and because of thefriction force needed to smooth thecellulose chain, the solution isthickened, and pseudoplasticity is achieved.

How it is used:

GinShiCelapplicationsare primarily focused on building materials and paints,although it hasa wide range of industrial applications including, not limited to:
Building material
Paint
Oil field operations
Coatings
Leather making
Ceramics
Agriculture
PVC
Building material usages:
Plasters, Renders, & Stucco:
Base plasters
Decorative Finish Plasters
Repair Plasters
Insulating Renders
Adhesives:
Tile Adhesives
EIFS Adhesives
Wallpaper Adhesives
Jointing & Filling Compounds:
Self-leveling compounds
EIFS leveling compounds
Wall leveling compounds
Grouts
Special Applications:
Underwater Concrete
Extruded Construction Elements
Paint Removers

Quality Cellulose Ether for building materials

1, 20 years experience in cellulose area
2, EU standard lab
3, Experts from USA for technical support
Cellulose Ether/HPMC from the manufacturer with 20 years experience, is used as a crucial additive for building materials, paint
Cellulose Ether/HPMC

What it is:

GinShiCelare types of cellulosederivatives known as cellulose ethers,specifically Methyl Cellulose(MC), Hydroxy Propyl Methyl Cellulose(HPMC), Hydroxyethyl Cellulose(HEC), and Hydroxy Ethyl MethylCellulose (HEMC) made by steps below:.
Soak the pure cellulose (purified cotton / wood pulp) in an aqueous caustic soda and organic solvent mix.
React the resultant alkaline cellulose with etherifying agents, such as alkyl halides or alkylene oxides,
Recover the solvents and wash the product,
Dry and mill the ethereified product.
What it does:

GinShiCelcelluloseethers provides thickening power, water retention ability,consistencydevelopment, suspension power, emulsion development,protective colloid,film formation, lubrication, solutionstabilization, and various otherfunctions.

How it functions:

Uponeachcellulose ether molecule are the cellulose chain, and the ethergroup,such as the methoxy, the hydroxypropoxy, the hydroxyethoxygroups. Themethoxy group, hydroxyethoxy group, and hydroxypropoxygroups act aswater gatherers, although their ability to gather watervary greatly bytype and number. These water gatherers, which areattached to aentangled backbone of cellulose chain, form a temporarybond between thewater molecule and itself. In doing so, water isphysically trapped bythis cellulose ether molecule. Thus, thewaterborne particles which aredissolved in water is also trapped, byvirtue of the flexible butentangled nature of the cellulose chain.This way, water is in effectretained, and emulsion and suspension isachieved, and because of thefriction force needed to smooth thecellulose chain, the solution isthickened, and pseudoplasticity is achieved.

How it is used:

GinShiCelapplicationsare primarily focused on building materials and paints,although it hasa wide range of industrial applications including, not limited to:
Building material
Paint
Oil field operations
Coatings
Leather making
Ceramics
Agriculture
PVC
Building material usages:
Plasters, Renders, & Stucco:
Base plasters
Decorative Finish Plasters
Repair Plasters
Insulating Renders
Adhesives:
Tile Adhesives
EIFS Adhesives
Wallpaper Adhesives
Jointing & Filling Compounds:
Self-leveling compounds
EIFS leveling compounds
Wall leveling compounds
Grouts
Special Applications:
Underwater Concrete
Extruded Construction Elements
Paint Removers

Anionic polyacrylamide for enhance oil recovery

Anionic polyacrylamide for oil recovery
1.heat resistant and anti-salt
2.Molecular weight:25-30million
Specification:
Item
Index
Solid content(%)
≥89
Hydrolysis degree(%)
19-30
Molecular weight(million)
1600-2400
Surface viscosity (mps)
≥11.5
Residual monomer(%)
≤0.05
Dissolving speed(hr)
≤2

Product description
1This product is produced with a process of copolymerization between/among acrylamide and one or more functional monomers
2)good dissolution,proof temperature and anti-salt,etc
3lt is stored in a dry indoor place with a good ventilation to prevent it from any moisture,rainfall,sunshine,etc
4)lt is packed in 25kg bags lined with polyethylene film. The shelf life is 2 years

Main usage
1)It is for triple oil extraction,mainly for the oil fields with a land temperature of more than 85 °C and a mineralization degree of more than 30,000mg/L
2lt is suitable for the polymer injection with waste water dosage and dilution,under which condition the viscosity of the solution lose little,so it can both reduce the cost of injection and reuse a large quantity of waste water

Quality Cellulose Ether similar to Samsung

Quality Cellulose Ether similar to Tylose

Quality Cellulose Ether

Quality HEC CAS NO.9004-62-0

Quality HEC with reasonable price

Quality HPMC for paint application

1. 20 years experience in cellulose ether area
2. EU standard lab
3. Experts from Austin, USA for technical support & PD
HPMC

What it is:

GinShiCelare types of cellulosederivatives known as cellulose ethers,specifically Methyl Cellulose(MC), Hydroxy Propyl Methyl Cellulose(HPMC), Hydroxyethyl Cellulose(HEC), and Hydroxy Ethyl MethylCellulose (HEMC) made by steps below:
Soak the pure cellulose (purified cotton / wood pulp) in an aqueous caustic soda and organic solvent mix.
React the resultant alkaline cellulose with etherifying agents, such as alkyl halides or alkylene oxides,
Recover the solvents and wash the product,
Dry and mill the ethereified product.
What it does:

GinShiCelcelluloseethers provides thickening power, water retention ability,consistencydevelopment, suspension power, emulsion development,protective colloid,film formation, lubrication, solutionstabilization, and various otherfunctions.

How it functions:

Uponeachcellulose ether molecule are the cellulose chain, and the ethergroup,such as the methoxy, the hydroxypropoxy, the hydroxyethoxygroups. Themethoxy group, hydroxyethoxy group, and hydroxypropoxygroups act aswater gatherers, although their ability to gather watervary greatly bytype and number. These water gatherers, which areattached to aentangled backbone of cellulose chain, form a temporarybond between thewater molecule and itself. In doing so, water isphysically trapped bythis cellulose ether molecule. Thus, thewaterborne particles which aredissolved in water is also trapped, byvirtue of the flexible butentangled nature of the cellulose chain.This way, water is in effectretained, and emulsion and suspension isachieved, and because of thefriction force needed to smooth thecellulose chain, the solution isthickened, and pseudoplasticity is achieved.

How it is used:

GinShiCelapplicationsare primarily focused on building materials and paints,although it hasa wide range of industrial applications including, not limited to:
Building material
Paint
Oil field operations
Coatings
Leather making
Ceramics
Agriculture
PVC
Building material usages:
Plasters, Renders, & Stucco:
Base plasters
Decorative Finish Plasters
Repair Plasters
Insulating Renders
Adhesives:
Tile Adhesives
EIFS Adhesives
Wallpaper Adhesives
Jointing & Filling Compounds:
Self-leveling compounds
EIFS leveling compounds
Wall leveling compounds
Grouts
Special Applications:
Underwater Concrete
Extruded Construction Elements
Paint Removers

Quality HPMC for tile adhesive with good price

Quality High Vicosity Cellulose Ether

Quality Hydroxide Radical End Capping Methyl Silicone Oil

Quality Hydroxide Radical End Capping Methyl Silicone Oil
Model No.: QLS-203-B Appearance: colorless translucent liquid Applications: this product can replace Bayer 200 products. It especially fits to mix gaseous phase white charcoal black silicon rubber. It can also help to graft and modify for organic silicone.

Quality Hydroxy Propyl Methyl Cellulose for building materials

Anionic polyacrylamide for oil recovery

Anionic polyacrylamide for oil recovery
1.heat resistant and anti-salt
2.Molecular weight: more than 25 million
Specification:
Item
Index
Solid content(%)
≥89
Hydrolysis degree(%)
19-30
Molecular weight(million)
1600-2400
Surface viscosity (mps)
≥11.5
Residual monomer(%)
≤0.05
Dissolving speed(hr)
≤2

Product description
1This product is produced with a process of copolymerization between/among acrylamide and one or more functional monomers
2)good dissolution,proof temperature and anti-salt,etc
3lt is stored in a dry indoor place with a good ventilation to prevent it from any moisture,rainfall,sunshine,etc
4)lt is packed in 25kg bags lined with polyethylene film. The shelf life is 2 years

Main usage
1)It is for triple oil extraction,mainly for the oil fields with a land temperature of more than 85 °C and a mineralization degree of more than 30,000mg/L
2lt is suitable for the polymer injection with waste water dosage and dilution,under which condition the viscosity of the solution lose little,so it can both reduce the cost of injection and reuse a large quantity of waste water