DCPD RESIN

PK-110 is water white thermo plastic resin obtained from polymerization and hydrogenation of cyclic ingredients.
PK-110 is water white thermo plastic resin obtained from polymerization and hydrogenation of cyclic ingredients. The major usages are tackier for hot melt adhesive (HMA), hot melt pressure sensitive adhesive (HMPSA) and solvent based pressure sensitive adhesive (SBPSA), because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate (EVA), styrene block copolymer (SBC).

SPECIFICATIONS
Softening Point (Ring & Ball, °C)
110-115
ASTM E 28
Color (50% Toluene Solution, HAZEN)
Max.50
ASTM D 1209
Color Stability (@200°C, 5hrs, Ga.#)
Max.2
ASTM D 1544
Acid Value (KOHmg/g)
Max.0.1
ASTM D 974


TYPICAL PROPERTIES
Specific Gravity (20/20 °C)
1.08
ASTM D 71
Softening Point (Ring & Ball, °C)
112
ASTM E 28
Color (50% Toluene Solution, HAZEN)
20
ASTM D 1209
Color Stability (@200°C, 5hrs, Ga.#)
<1
ASTM D 1544
Acid Value (KOHmg/g)
<0.1
ASTM D 974
BRF, @160°C, cps
BRF, @180°C, cps
1,330
350

Molecular Weight (GPC, Mw)
510
G.P.C
Pearlk Industries and its marketing affiliates not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and for the health and safety of employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product, and nothing herein waives any of the Seller’s conditions of sale.