2011 hot products recycled HDPE and virgin HDPE

HDPE1 High Density Polyethylene HDPE
2 recycled HDPE ,virgin HDPE
3 white, black ,green and ect,
4 use in pastic ,molding e
High Density Polyethylene HDPE
Name
HDPE
Item
Standard

Basic characteristics
Melt Mass-Flow Rate (MFR) g/10min
0.06-0.08
Density
0.948-0.925
Tensile Stress at Yield Kg/cm
2

≥240
Tensile Stress at Break Kg/cm
2

≥370
Elongation at Break%
≥480
Izod Impact Strength Kg./cm
≥27

Mechanical characteristics
Hardness
≥60
ESCR (environmental stress crack resistance)
≥580
Heat capacity
Melting point°C
125-135

RECYCLED HDPE:
1.DENSITY:0.956G/CM3
2.MELT MASS-FLOW RATE:0.04G/10MIN
3.HS CODE:3901902000
4.SPECIFICATION:
ITEM
STANDARD
Melt Flow Rate(g/10min)
0.1
Density(g/cm
3
)
0.95
Power Ash%
0.01
Tensile Strength(MPa)
22
Elongation At Break%
600
Environmental stress-cracking
1500

ITEM
STANDARD
Melt Flow Rate(g/10min)(1:21.6kg)
9.0-13.0
Density(g/cm3)
0.948-0.951
Power Ash%
0.04
Tensile Strength(MPa)
23
Elongation At Break%
600
Environmental stress-cracking
1500
5.USES:
1).PRODUCE PLASTIC ARTICLES BY INGECTION MOULDING
2).BLOW MOLDING
3).USED AS PERITONE